Advertisement

Dispensing Valve

July 10, 2006 10:13 am | I & J Fisnar, Inc. | Product Releases | Comments

The VMP30H is a multipurpose, mini-poppet pneumatic valve designed for controlled dispensing of low to high viscosity materials, such as silicones, RTV, epoxy, rubber adhesives, greases, and filled materials.

LISTED UNDER: Dispense | Control | Silicone

Liquid Silicone

July 7, 2006 8:43 am | Momentive Performance Materials Inc. | Product Releases | Comments

Company continues to create customized liquid silicone solutions for the healthcare industry. Two

LISTED UNDER: Silicone | Prototyping | Rapid Prototyping

Gas Plasma: A Green Alternative for Surface Engineering

July 5, 2006 11:02 am | Plasmatech, Inc. | Product Releases | Comments

There are many methods with which to affect the surface of a material or device to achieve a desired effect. Therefore, factors related to the process such as environmental considerations or temperature concerns will reduce the number of possible options.

LISTED UNDER: Surface Modification | Vacuum | Cleanroom Assembly
Advertisement

Mix-Dispense Valve

May 2, 2006 8:29 am | Sealant Equipment & Engineering, Inc. | Product Releases | Comments

The Model 2200-545-037 two-component miniature mix-dispense valve precisely dispenses miniature beads and very small volumes of low-viscosity pourable materials and abrasive or filled materials.

LISTED UNDER: Dispense | Miniature Valve | Flow

Molded Rubber/Silicone Components

May 2, 2006 8:28 am | Hiawatha Rubber Co. | Product Releases | Comments

Close tolerance, medical-application-specific molded rubber and silicone components and bonded rollers requiring special formulations and surface finishes are offered.

LISTED UNDER: Molded Rubber | Silicone

Fluoroplastic Introducers

April 18, 2006 7:27 am | Product Releases | Comments

Fluoroplastic tipped tubes are available to be used as IV or needle introducers. These tubes are designed with a tapered and/or beveled end to assist in the insertion of IVs and facilitate the transfer or extraction of fluids and can be laser marked for identification purposes.

LISTED UNDER: PTFE

Silicone Elastomers for Healthcare Tubing

April 4, 2006 7:38 am | Momentive Performance Materials Inc. | Product Releases | Comments

With the variety of tubing options available to medical device manufacturers, it is often difficult to determine which type would be best suited to a particular application.

LISTED UNDER: Silicone | Vacuum | Injection Molding

Environmentally Friendly Materials

March 8, 2006 10:20 am | Product Releases | Comments

Rogers Corp. has created a new “Green Leader” website, which contains information on the company’s environmentally friendly specialty materials and related subjects.

LISTED UNDER: Silicone
Advertisement

Dispense Valve (2807)

February 9, 2006 8:45 am | Sealant Equipment & Engineering, Inc. | Product Releases | Comments

The model 2200-245-125 Tip-Seal dispense valve is designed for precision dispensing of low- to high-viscosity flowable materials. It is also used in high-speed stitching or repetitive on-off applications where short segments of material are deposited onto a surface.

LISTED UNDER: Dispense | Flow | Silicone

Chemical Resistant Tubing

February 6, 2006 10:30 am | Parker Texmed | Product Releases | Comments

A full line of chemical resistant tubing products extruded from TexFluor PTFE, FEP, PFA, or MFA is available for use in material handling applications such as delivery systems.

LISTED UNDER: PTFE

Liquid Silicone Rubber Resolves Precision Tubing Component Design Challenge

January 6, 2006 11:04 am | Product Releases | Comments

Zevex International Inc., a Salt Lake City, UT manufacturer of enteral nutrition products, chose GE–Silicones’ injection–molded LIM 6050-D2 liquid silicone rubber to design a complex, precision tubing component and solve a big challenge.

LISTED UNDER: Peristaltic | Air Pump | Silicone

Emphasis on Tooling: Guidelines for Ensuring Quality When Extruding Medical Devices

November 1, 2005 11:32 am | Guill Tool & Engineering Co., Inc. | Product Releases | Comments

Productivity and profitability are two important goals when working with extrusions. This exclusive report offers advice for producing extrusions that meet dimensional specifications and maintain specified minimum tolerances so that end products can be economically produced.

LISTED UNDER: Extrusion Equipment | Silicone

Acrylic Multipolymer Compound

September 30, 2005 11:38 am | Evonik Cyro, LLC | Product Releases | Comments

Developed for injection molding applications, Vu-Stat Y-20 compound provides permanent electro-static dissipative (ESD) protection to medical devices where static attraction is a concern, such as needle hubs for bracheotherapy and spacers for dry powder pharmaceutical inhalation.

LISTED UNDER: Acrylics | Injection Molding

Variable-Ratio Meter Systems

September 30, 2005 11:38 am | Sealant Equipment & Engineering, Inc. | Product Releases | Comments

The Servo-Flo 105 variable-ratio meter system is designed for automated, robotic, or manual dispensing applications. This dual servomotor dispensing system allows variable dispense rates and easy adjustment of material ratios without costly mechanical equipment alterations.

LISTED UNDER: Silicone

Medical Equipment Design and the Critical Nature of Interconnection

August 15, 2005 7:59 am | Smiths Connectors | Hypertac | Product Releases | Comments

Medical equipment such as patient monitors, scanners, electronic catheters, and therapeutic devices require dependable connectivity and accurate signal transmission.

LISTED UNDER: Connectors | Cable Assemblies | Wire and Cable

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading