Advertisement

Cyclo Olefin Polymer Syringes

November 15, 2012 11:32 am | Qosina | Product Releases | Comments

Qosina now stocks Medallion syringes (#C1116 – #C1126) made from Cyclo Olefin Polymer (COP). Offered with either an ABS or PC plunger, the 20 ml syringes are available in an array of colors...

LISTED UNDER: Cannulae/Needles/Trocars | Transfer Devices | Silicone

Custom Gaskets Match Fluid Handling Reqiurements

November 14, 2012 9:57 am | Product Releases | Comments

Custom manufactured gaskets and seals that are engineered to match critical OEM fluid handling requirements and die cut to precise specifications are available from Interstate Specialty Products...

LISTED UNDER: Die Cutting | Gaskets and Seals | Silicone

"KleenTuff" Class 100 cleanroom Bags and Tubing

October 3, 2012 10:08 am | Degage Corp. | Products

"KleenTuff", a Class 100 cleanroom, low density barefoot, virgin polyethylene resin blend, is specifically designed for use in applications where cleanliness levels meeting or exceeding IEST-CC-STD 12460 level 100 are necessary. DegageCorp’s "KleenTuff" does not contain any additives such as slip agent, anti-blocking agent or antioxidants and "KleenTuff" exhibits excellent characteristics in the area of low ionic contamination, low out-gassing and low non-volatile residue. It does not exhibit the typical characteristics of low density barefoot polyethylene material such as blocking and "KleenTuff" bags and tubing open extremely easily. "KleenTuff' has added strength, increased puncture resistance, enhanced sealability, ease of opening, greater clarity and greater seam strength. A 4mil "KleenTuff" bag will out-perform and give you increased cost effectiveness over a 6mil low density polyethylene bag

LISTED UNDER: Polyethylenes | Films/Foils | Pouches/Bags
Advertisement

Implantable Components

October 1, 2012 12:19 pm | Products

Bob, Inc. provides precision machining of complex medical device components for applications such as: orthopedics, spinal, dental, ENT, neurology and urology. Combining the talent and experience of our engineers and machinists with 3-D solid modeling programming software and multi-axis machining technology allows us to produce complex medical device components to close tolerances very efficiently. Bob, Inc. supports your complete Prototype to Production process by providing product development assistance, prototypes, product launch as well as production requirements. We have the capacity to support large volume contracts utilizing nearly 60 CNC machines that include 9-axis CNC swiss machines, robotic loading CNC twin spindle lathes, high speed 5-axis CNC machining centers, as well as multi-pallet CNC horizontal machining centers.

LISTED UNDER: Precision Machining | Acetals | PEEK, PEK

4335 Fire Rated Sheet for Housings, Displays

September 28, 2012 9:37 am | Product Releases | Comments

Boltaron 4335 proprietary PVC/Acrylic sheet for thermoforming and fabrication offers a UL 94 V-0 fire rating, exceptional physical properties and an unlimited selection of colors and textures, according to Adam Mellen, Director.

LISTED UNDER: Enclosures/Chassis | Sheet/Film | Acrylics

Silicone Ink Colors for Healthcare Applications

September 21, 2012 11:19 am | NuSil Technology | Product Releases | Comments

NuSil Technology, LLC, the global leader in silicone materials for the healthcare, pharmaceutical and drug delivery industries, announces the launch of a new heat-cure colored inks series, MED-6613-X.

LISTED UNDER: Silicone | Marking Products | Silicone

Clear Medical Grade TPEs

September 21, 2012 10:02 am | Product Releases | Comments

Several new grades of clear, SEBS-based thermoplastic elastomers (TPEs) from Elastocon TPE Technologies now offer medical products designers and manufacturers an even broader selection from which to choose.

LISTED UNDER: Thermoplastic Elastomers | Injection Molding | Handles and Knobs

Dual Check Valves

September 17, 2012 11:11 am | Qosina | Product Releases | Comments

Qosina is pleased to announce the addition of several new Dual Check Valves in their catalog of thousands of stock components, manufactured for Qosina by B. Braun.

LISTED UNDER: Check | Control | Silicone
Advertisement

Medical-Grade PVC Film Withstands Gamma Sterilization

September 6, 2012 10:16 am | Product Releases | Comments

A new family of calendered PVC films for medical applications incorporates a non-phthalate citrate plasticizer that is stable in applications sterilized by gamma irradiation, it was announced today by Teknor Apex Company.

LISTED UNDER: Sheet/Film | PVC

Brochure Shows Victrex Peek Polymer

September 5, 2012 10:41 am | Product Releases | Comments

When molders are tasked with forming large and intricate parts out of advanced thermoplastics, they are using VICTREX® PEEK, a high performance polymer with more than 30 years of proven success...

LISTED UNDER: PEEK, PEK | Polymers | Injection Molding

Peek Polymers Can Reduce Weight, Improve Reliability

August 21, 2012 11:02 am | Product Releases | Comments

Aerospace, automotive, and electronics engineers have been tasked with finding material solutions that can reduce weight, improve functionality, and help consolidate or miniaturize parts in some of the most demanding environments.

LISTED UNDER: PEEK, PEK | Injection Molding | Thermoplastics Molding

High Volume Variable Ratio Servo Dispense System

August 15, 2012 11:49 am | Product Releases | Comments

Sealant Equipment & Engineering’s new Servo-Flo™ 105-HV High Volume, Variable-Ratio Meter System is ideal for high-precision meter-mix dispensing processes for 2-part materials.

LISTED UNDER: Dispensers/Fillers | Silicone

PTFE Coated Mandrels Block Tubing from Shrinking

July 24, 2012 10:49 am | Applied Plastics Co., Inc. | Product Releases | Comments

A full line of blockers coated with Teflon® (forming mandrels) that maintain tight tolerances on the inside diameter of catheter shafts is available from Applied Plastics Co., Inc. of Norwood, Massachusetts.

LISTED UNDER: PTFE | Nitinol | Nitinol

Innovative Composite Fabrics to Reduce Cycle Time and Lower Cost in Composites Manufacturing

July 2, 2012 2:55 pm | Product Releases | Comments

The need to reduce cycle time in order to lower cost in composites manufacturing is critical. Victrex Polymer Solutions, a world leader in polyaryletherketones and Tissa Glasweberei AG, a recognized pioneer in continuous fiber glass weaving techniques, have co-developed innovative composite fabrics...

LISTED UNDER: PEEK, PEK

Foster Delivery Science offers Custom Radiopaque PEEK Compounds for Orthopedic Implants

June 19, 2012 7:45 am | Product Releases | Comments

Foster Delivery Science, a business unit of Foster Corporation that specializes in contract development and manufacturing of implant and drug delivery polymers, now offers custom radiopaque PEEK...

LISTED UNDER: Plastics & Elastomers

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading