Advertisement

Light-Cured Adhesives Accommodate Any Assembly Schedule

January 13, 2009 6:12 am | Devcon | Product Releases | Comments

Versatile Tru-Bond 18400 Series light-cured pressure-sensitive adhesives provide excellent hold on metals, glass, ceramics, and plastics, including difficult-to-bond materials such as polyethylene and polypropylene panels.

LISTED UNDER: Pressure Sensitive
Advertisement

Reticulated Foams Maximize Surface Area-to-Volume Ratio

January 12, 2009 12:25 pm | Goodfellow Corporation | Product Releases | Comments

Metal, carbon and ceramic reticulated foams&#151low-density, permeable structures of cells and continuous ligaments&#151are available in small quantities to researchers and design engineers.

LISTED UNDER: Foam

Adhesive Designed for Foam Bonding

January 12, 2009 12:25 pm | Adchem Corporation | Product Releases | Comments

This aggressive acrylic-based transfer adhesive is specifically designed for superior foam bonding and elevated temperature performance.

LISTED UNDER: Acrylic | Die Cutting | Die Cutting

Silicone Adhesives Eliminate Part Racking

January 6, 2009 6:28 am | Product Releases | Comments

This line of single-component light and moisture curing silicone adhesives is designed for use on medical devices that incorporate silicone materials or require highly flexible bond joints or coatings.

LISTED UNDER: UV-or Light-Cure | Medical Device Testing | Component Testing

Medical Foam Tape Is Moisture Vapor Permeable

December 5, 2008 7:04 am | Product Releases | Comments

Scapa 4005-800A is an extremely soft and conformable pressure sensitive polyurethane foam tape for direct skin applications including wound care, consumer dressings, and medical device attachment. It consists of thin (0.

LISTED UNDER: Tapes

Medical Device Adhesive Formulated With See-Cure Technology

December 5, 2008 7:04 am | Product Releases | Comments

The medical device adhesive 1201-M-SC is a flexible adhesive designed for rapid bonding of a variety of rigid and flexible plastics typically used in the manufacture of medical devices, such as reservoirs, tube sets, and catheters. The recommended substrates include PC, PET, PS, PU, PVC, and ABS.

LISTED UNDER: UV-or Light-Cure

USP Class VI Approved Medical Adhesive Has Quick Set Time

December 5, 2008 7:04 am | Master Bond, Inc. | Product Releases | Comments

This low viscosity medical epoxy—EP41SMED—has a handling time of as little as 10-15 minutes and forms resistant bonds to cold sterilants such as EtO and gamma radiation as well as water, oil, and many organic solvents.

LISTED UNDER: Epoxy | Biocompatibility Testing

Antimicrobial Passes USP and ISO Tests for Biocompatability

December 5, 2008 7:04 am | Biosafe | Product Releases | Comments

Manufacturers of medical and pharmaceutical products now have the assurance that that they can benefit from the substantial advantages of an antimicrobial over conventional additives while meeting critical standards of biocompatability.

LISTED UNDER: Antimicrobial

Molded Rubber And Plastic Components Website

December 5, 2008 7:03 am | Product Releases | Comments

Minnesota Rubber and Plastics (MR&P) has redesigned its website, which communicates the company's science-based approach comprising product design, manufacturing, process development, sourcing, quality systems, material sciences expertise, and program management.

LISTED UNDER: Molding | Product Design

International Plastics Design Competition

December 5, 2008 7:03 am | Product Releases | Comments

The Alliance of Plastics Processors (APP) is now accepting applications for the International Plastics Design Competition (IPDC), which will co-locate with NPE2009 on June 22-26 at Chicago's McCormick Place.

LISTED UNDER: Molding

80 Universal Masterbatches Kept in Stock

November 10, 2008 6:52 am | Clariant Corporation | Product Releases | Comments

Based on a multipurpose compatible carrier system, OmniColor products can be used in a wide range of polymers at an average let-down ratio of just 100:1. This is four times less than the 25:1 ratio typical for other colorants.

LISTED UNDER: Polymers

Tubing & Hose Catalogs

November 10, 2008 6:52 am | Product Releases | Comments

NewAge Industries Inc. offers nine new product catalogs featuring its plastic tubing, rubber hose, fittings, clamps, and custom services manufactured for a wide variety of industries and uses.

LISTED UNDER: Rubber | Fittings | Silicone

Transdermal Patch Manufacturing System Offers High Speeds

October 13, 2008 12:07 pm | Doyen Medipharm | Product Releases | Comments

The company has improved its existing production technology to achieve higher production speeds and efficiency to cater to the growing demand for transdermal patches.

LISTED UNDER: Transdermal Components

TPU Enables Disposable Thin-Wall Extruded Tubing

October 9, 2008 6:06 am | New England Urethane | Product Releases | Comments

A phthalate (plasticizer) free, very stretchable thermoplastic polyurethane (TPU) alloy promises to offer enhanced product design and application parameters for medical product and other designers and manufacturers.

LISTED UNDER: Thermoplastic Elastomers | Product Design

Custom Tubing Configurations Offered Using Silicone and Thermoplastic

October 9, 2008 6:06 am | Helix Medical | Product Releases | Comments

The company is a leader in the extrusion and molding of platinum-cured silicone and thermoplastic products. Custom tubing configurations include multi-lumen, profiles, standard, braided reinforced, cord, color stripe, close tolerance, and peristaltic pump tubing.

LISTED UNDER: Silicone | Peristaltic | Silicon Molding

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading