Advertisement

Rigid, Electrically Conductive Film For Stable Z-Axis Conductivity

February 3, 2009 7:20 am | Adhesives Research, Inc. | Product Releases | Comments

This electrically conductive film, ARcare 95000, is offered for use in medical devices that require low resistance and highly reliable Z-axis conductivity. It is a 4.0 mil (0.

LISTED UNDER: Conductive

Plastic Dissipates Heat, Increases Life of LED Units

January 19, 2009 4:05 am | Cool Polymers, Inc. | Product Releases | Comments

A thermally conductive plastic, CoolPoly, has been developed expressly for managing the heat output of increasingly popular light emitting diodes (LEDs).

LISTED UNDER: Polymers

Glass Ceramic Enables Machinable Material and Finished Components

January 14, 2009 9:25 am | Goodfellow Corporation | Product Releases | Comments

Macor glass ceramic products are available as both machinable material (rods, plates, bars, and discs) and finished components that are precision-machined to customer specifications. The company delivers the performance of a technical ceramic with the versatility of a high-performance plastic.

LISTED UNDER: Ceramics
Advertisement

Silicone-Free Interface Material Provides High Thermal Conductivity

January 14, 2009 9:25 am | Product Releases | Comments

Keratherm U 90 thermal interface material is designed for use where contamination concerns prohibit the use of silicone-based thermal pads, but where high levels of thermal conductivity are needed for sufficient thermal transfer in hot electronic devices.

LISTED UNDER: Polyurethanes | Silicone

Wire Improves Cardiovascular Catheter Manufacturing

January 14, 2009 9:25 am | Applied Plastics Co. Inc. | Product Releases | Comments

This Teflon coated extrusion wire is fabricated using a proprietary etching process that eliminates flaking and permits over 25% elongation to keep the catheter's inside diameter clean. Supplied spooled or cut to length, this fine extrusion wire features a 0.

LISTED UNDER: Wire and Cable | Nitinol

Polymers Brochure

January 14, 2009 9:25 am | Product Releases | Comments

Victrex T-Series polymers offer a solution for applications requiring high temperature resistance; compressive, tensile, and flexural strength; and low fatigue properties.

LISTED UNDER: Polymers

Adhesives Website

January 14, 2009 9:25 am | Product Releases | Comments

DYMAX has launched a redesigned site that focuses on education with more easy-to-find information, including downloadable literature, selector guides, and product bulletins.

LISTED UNDER: UV-or Light-Cure

Fine Ceramics Website

January 14, 2009 9:25 am | Product Releases | Comments

Kyocera Corp. has launched its Fine Ceramics World website, a comprehensive introduction to the field of fine ceramics and the various roles these materials play in supporting the development of cutting-edge technology.

LISTED UNDER: Ceramics
Advertisement

Light-Cured Adhesives Accommodate Any Assembly Schedule

January 13, 2009 6:12 am | Devcon | Product Releases | Comments

Versatile Tru-Bond 18400 Series light-cured pressure-sensitive adhesives provide excellent hold on metals, glass, ceramics, and plastics, including difficult-to-bond materials such as polyethylene and polypropylene panels.

LISTED UNDER: Pressure Sensitive

Reticulated Foams Maximize Surface Area-to-Volume Ratio

January 12, 2009 12:25 pm | Goodfellow Corporation | Product Releases | Comments

Metal, carbon and ceramic reticulated foams&#151low-density, permeable structures of cells and continuous ligaments&#151are available in small quantities to researchers and design engineers.

LISTED UNDER: Foam

Adhesive Designed for Foam Bonding

January 12, 2009 12:25 pm | Adchem Corporation | Product Releases | Comments

This aggressive acrylic-based transfer adhesive is specifically designed for superior foam bonding and elevated temperature performance.

LISTED UNDER: Acrylic | Die Cutting | Die Cutting

Silicone Adhesives Eliminate Part Racking

January 6, 2009 6:28 am | Product Releases | Comments

This line of single-component light and moisture curing silicone adhesives is designed for use on medical devices that incorporate silicone materials or require highly flexible bond joints or coatings.

LISTED UNDER: UV-or Light-Cure | Medical Device Testing | Component Testing

Medical Foam Tape Is Moisture Vapor Permeable

December 5, 2008 7:04 am | Product Releases | Comments

Scapa 4005-800A is an extremely soft and conformable pressure sensitive polyurethane foam tape for direct skin applications including wound care, consumer dressings, and medical device attachment. It consists of thin (0.

LISTED UNDER: Tapes

Medical Device Adhesive Formulated With See-Cure Technology

December 5, 2008 7:04 am | Product Releases | Comments

The medical device adhesive 1201-M-SC is a flexible adhesive designed for rapid bonding of a variety of rigid and flexible plastics typically used in the manufacture of medical devices, such as reservoirs, tube sets, and catheters. The recommended substrates include PC, PET, PS, PU, PVC, and ABS.

LISTED UNDER: UV-or Light-Cure

USP Class VI Approved Medical Adhesive Has Quick Set Time

December 5, 2008 7:04 am | Master Bond, Inc. | Product Releases | Comments

This low viscosity medical epoxy—EP41SMED—has a handling time of as little as 10-15 minutes and forms resistant bonds to cold sterilants such as EtO and gamma radiation as well as water, oil, and many organic solvents.

LISTED UNDER: Epoxy | Biocompatibility Testing

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading