Advertisement

Molded Rubber And Plastic Components Website

December 5, 2008 7:03 am | Product Releases | Comments

Minnesota Rubber and Plastics (MR&P) has redesigned its website, which communicates the company's science-based approach comprising product design, manufacturing, process development, sourcing, quality systems, material sciences expertise, and program management.

LISTED UNDER: Molding | Product Design

80 Universal Masterbatches Kept in Stock

November 10, 2008 6:52 am | Product Releases | Comments

Based on a multipurpose compatible carrier system, OmniColor products can be used in a wide range of polymers at an average let-down ratio of just 100:1. This is four times less than the 25:1 ratio typical for other colorants.

LISTED UNDER: Polymers

Tubing & Hose Catalogs

November 10, 2008 6:52 am | Product Releases | Comments

NewAge Industries Inc. offers nine new product catalogs featuring its plastic tubing, rubber hose, fittings, clamps, and custom services manufactured for a wide variety of industries and uses.

LISTED UNDER: Rubber | Fittings | Silicone
Advertisement

Transdermal Patch Manufacturing System Offers High Speeds

October 13, 2008 12:07 pm | Product Releases | Comments

The company has improved its existing production technology to achieve higher production speeds and efficiency to cater to the growing demand for transdermal patches.

LISTED UNDER: Transdermal Components

TPU Enables Disposable Thin-Wall Extruded Tubing

October 9, 2008 6:06 am | Product Releases | Comments

A phthalate (plasticizer) free, very stretchable thermoplastic polyurethane (TPU) alloy promises to offer enhanced product design and application parameters for medical product and other designers and manufacturers.

LISTED UNDER: Thermoplastic Elastomers | Product Design

Custom Tubing Configurations Offered Using Silicone and Thermoplastic

October 9, 2008 6:06 am | Product Releases | Comments

The company is a leader in the extrusion and molding of platinum-cured silicone and thermoplastic products. Custom tubing configurations include multi-lumen, profiles, standard, braided reinforced, cord, color stripe, close tolerance, and peristaltic pump tubing.

LISTED UNDER: Silicone | Peristaltic | Silicon Molding

Low Viscosity Adhesive/Sealant Cures at Room Temperature

October 9, 2008 6:06 am | Master Bond, Inc. | Product Releases | Comments

This easy-to-use, two-component epoxy adhesive called EP30 is provided for high performance bonding applications. It develops excellent physical strength properties even when cured at ambient temperatures. Cure can be accelerated by use of moderate heat.

LISTED UNDER: Epoxy

Epoxy Offers Excellent Electrical Insulation Properties

October 3, 2008 12:48 pm | Master Bond, Inc. | Product Releases | Comments

Supreme 11AOHT is a two-component room temperature curing epoxy adhesive with high thermal conductivity and excellent electrical insulation properties. It is a paste that can be applied without sagging or dripping even on vertical surfaces.

LISTED UNDER: Epoxy
Advertisement

Silver-Chloride Material Provides Conductive Solution

October 3, 2008 12:48 pm | Product Releases | Comments

The unique printed Silver Silver-Chloride material provides higher performance at a lower price, offering medical device manufacturers a refined solution for delivering conductive materials to the industry.

LISTED UNDER: Conductive

Adhesives Replace Ultrasonic Welding Applications

September 10, 2008 8:33 am | Product Releases | Comments

The 1000 seres of medical device adhesives make high-speed, high-volume bonding of medical device housings, tube sets, catheters, enclosures, and housings possible. These solvent-free adhesives replace ultrasonic welding applications and costly two-part products.

LISTED UNDER: Tapes

Polymer Replaces Metal Poppets in Valves

September 10, 2008 8:33 am | Product Releases | Comments

Manufacturers of check valves and pressure relief valves for hydraulic and pneumatic compressors are constantly looking for ways to improve the performance of their products. Valve performance, more than any other component, determines compressor efficiency.

LISTED UNDER: Thermoplastic Elastomers | Compressor

LM Guide Employs Cage Technology

September 10, 2008 8:33 am | Product Releases | Comments

This caged technology employs a synthetic resin cage with a patented curvature that cradles each ball and separates it from the next one. The spaces between the rolling elements retain grease and act as a lubrication system.

LISTED UNDER: Resin

High-Performance Gel Provides Low Thermal Resistance

September 10, 2008 8:33 am | Product Releases | Comments

Revitalized interest in high performance interface gel compounds has prompted a re-manufacture and restock of the once discontinued product-Sarcon XR-e material.

LISTED UNDER: Operator Interface Products | Silicone

Stainless Components Machined With Complex Part Features

September 10, 2008 8:33 am | Product Releases | Comments

Small, custom cylindrical components-Swiss machined from 303 stainless steel and other medical grade metals-are manufactured to specification. Part features available include turning and milling grooves and cross holes at various angles, slots, threading, knurling, and flanges.

LISTED UNDER: Metals

New Polyisoprene Parts Added to Offering

September 5, 2008 7:17 am | Kent Elastomer Products, Inc. | Product Releases | Comments

Company has increased its choice of materials available within the company’s dip molding technology. They are now able to offer dip-molded parts made of synthetic polyisoprene. This material has the look, feel, and physical properties of natural rubber latex.

LISTED UNDER: Synthetic Polyisoprene

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading