Advertisement

Low Viscosity Adhesive/Sealant Cures at Room Temperature

October 9, 2008 6:06 am | Master Bond, Inc. | Product Releases | Comments

This easy-to-use, two-component epoxy adhesive called EP30 is provided for high performance bonding applications. It develops excellent physical strength properties even when cured at ambient temperatures. Cure can be accelerated by use of moderate heat.

LISTED UNDER: Epoxy

Epoxy Offers Excellent Electrical Insulation Properties

October 3, 2008 12:48 pm | Master Bond, Inc. | Product Releases | Comments

Supreme 11AOHT is a two-component room temperature curing epoxy adhesive with high thermal conductivity and excellent electrical insulation properties. It is a paste that can be applied without sagging or dripping even on vertical surfaces.

LISTED UNDER: Epoxy

Silver-Chloride Material Provides Conductive Solution

October 3, 2008 12:48 pm | Product Releases | Comments

The unique printed Silver Silver-Chloride material provides higher performance at a lower price, offering medical device manufacturers a refined solution for delivering conductive materials to the industry.

LISTED UNDER: Conductive
Advertisement

Polymer Replaces Metal Poppets in Valves

September 10, 2008 8:33 am | Product Releases | Comments

Manufacturers of check valves and pressure relief valves for hydraulic and pneumatic compressors are constantly looking for ways to improve the performance of their products. Valve performance, more than any other component, determines compressor efficiency.

LISTED UNDER: Thermoplastic Elastomers | Compressor

Adhesives Replace Ultrasonic Welding Applications

September 10, 2008 8:33 am | Product Releases | Comments

The 1000 seres of medical device adhesives make high-speed, high-volume bonding of medical device housings, tube sets, catheters, enclosures, and housings possible. These solvent-free adhesives replace ultrasonic welding applications and costly two-part products.

LISTED UNDER: Tapes

LM Guide Employs Cage Technology

September 10, 2008 8:33 am | Product Releases | Comments

This caged technology employs a synthetic resin cage with a patented curvature that cradles each ball and separates it from the next one. The spaces between the rolling elements retain grease and act as a lubrication system.

LISTED UNDER: Resin

Stainless Components Machined With Complex Part Features

September 10, 2008 8:33 am | Product Releases | Comments

Small, custom cylindrical components-Swiss machined from 303 stainless steel and other medical grade metals-are manufactured to specification. Part features available include turning and milling grooves and cross holes at various angles, slots, threading, knurling, and flanges.

LISTED UNDER: Metals

High-Performance Gel Provides Low Thermal Resistance

September 10, 2008 8:33 am | Product Releases | Comments

Revitalized interest in high performance interface gel compounds has prompted a re-manufacture and restock of the once discontinued product-Sarcon XR-e material.

LISTED UNDER: Operator Interface Products | Silicone
Advertisement

New Polyisoprene Parts Added to Offering

September 5, 2008 7:17 am | Kent Elastomer Products, Inc. | Product Releases | Comments

Company has increased its choice of materials available within the company’s dip molding technology. They are now able to offer dip-molded parts made of synthetic polyisoprene. This material has the look, feel, and physical properties of natural rubber latex.

LISTED UNDER: Synthetic Polyisoprene

Infrared Calibrator Heats Up For Fast and Easy High-Quality Thermometer Calibration

August 25, 2008 5:53 am | Product Releases | Comments

The two new models utilize the same size targets used and recommended by thermometer manufacturers and special design technology that assists in productively performing high-quality infrared thermometer calibrations without requiring a background in physics.

LISTED UNDER: Cyanoacrylate

PSAs Specific for Medical Electrode Manufacturing

August 21, 2008 9:54 am | Product Releases | Comments

Products in the Electrofix line are single-coated with medical grade acrylic adhesives in varying tacks. For patients with acrylic sensitivities, a medical grade synthetic rubber resin adhesive is also available.

LISTED UNDER: Pressure Sensitive

Specialized Polymer Materials for Healthcare Customers

August 12, 2008 8:15 am | PolyOne Corp. | Product Releases | Comments

PolyOne Corp. introduces its portfolio of specialty engineered materials. These technologies

LISTED UNDER: Polymers | Micro Molding

Fully-Integrated OEM for Development of Implantable Devices

August 12, 2008 8:15 am | MRPC | Product Releases | Comments

Peek-Optima, heavily involved in the implantable-grade biomaterials industry, is used for implantable devices that have contact with blood or tissue for more than 30 days.

LISTED UNDER: Polymers | Injection Molding

Castable Urethane Compounds for Making Precision Molds and Holding Fixtures

August 12, 2008 8:15 am | Product Releases | Comments

Flexane castable liquid urethane compounds cure to form both flexible and rigid rubber parts for a variety of OEM applications. These room temperature curing, nonshrinking urethanes will not change shape while curing and can be used to make precision molds that faithfully reproduce fine detail.

LISTED UNDER: Urethane

Moisture-Resistant Gasketing Resin

August 12, 2008 8:14 am | Product Releases | Comments

Company has annouced a new gasketing resin for sealing electrical conduit boxes and critical assemblies and devices.

LISTED UNDER: Resin

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading