Advertisement

Silicone Is the Stone That Kills Two Birds

October 13, 2006 9:50 am | Product Releases | Comments

Silicone has emerged as one of the most researched biomaterials available to pharmaceutical makers and medical device manufacturers. As such, it readily lends itself to being an ideal choice for use in combination products where these two industries merge.

LISTED UNDER: Silicone | Injection Molding | Micro Molding

UV Polymer Optical Bonding

October 13, 2006 9:46 am | Product Releases | Comments

A patent-pending, advanced UV polymer optical bonding solution that improves contrast, enables brighter graphics, enhances ruggedness, and offers a more robust overall visual experience for a virtually limitless variety of LCD solutions is available.

LISTED UNDER: UV-or Light-Cure

Enabling a Device to Breathe

October 11, 2006 7:56 am | W.L. Gore & Associates | Product Releases | Comments

Creating a contaminant and/or vacuum-free drug delivery device, such as an inhaler, nasal pump, or eye dropper, is a difficult task. This article examines a venting option that enables a closed, equalized system for multiunit-dose drug packaging.

LISTED UNDER: PTFE | Vacuum | Air Pump
Advertisement

Films That Dissolve Diagnostics Manufacturers' Needs

October 10, 2006 6:15 am | Product Releases | Comments

Dissolvable films are currently used in a variety of applications such as consumer breath freshener products and as vehicles for over-the-counter drug delivery. Manufacturers are also exploring the technology’s unique characteristics for use with in vitro diagnostic devices.

LISTED UNDER: Films | Product Design

Fabricating Components . . . Rapidly

October 10, 2006 6:15 am | Product Releases | Comments

Medical device manufacturers require device components to be produced quickly to ensure their products are available to the marketplace as soon as possible. However, quality cannot be sacrificed in this effort. Rapid prototype tooling is a unique option that satisfies both of these two criteria.

LISTED UNDER: Rapid Prototyping | Prototyping | Rapid Prototyping

MRI Compatible Material

October 9, 2006 12:09 pm | Product Releases | Comments

The Endolign composite is for use in load bearing medical device applications requiring blood, bone, or tissue contact of more than 30 days.

LISTED UNDER: Polymers

Polyester Film Tape

September 7, 2006 5:49 am | Product Releases | Comments

This double-coated polyester film tape&#1513175M&#151is designed to bond to most foam and gasket materials.

LISTED UNDER: Films

Choosing a Vent Membrane for a Medical Device

September 5, 2006 7:16 am | Product Releases | Comments

Hydrophobic polymeric membranes are widely used in medical devices to sterilize gases which pass through them or to provide sterile barriers between the atmosphere and device interiors.

LISTED UNDER: PTFE | Insert Molding | Micro Molding
Advertisement

Sapphire/Ruby Balls

August 8, 2006 12:51 pm | Product Releases | Comments

Sapphire and ruby balls feature precise sphericity with A.F.B.M.A grade diameter tolerances and exhibit Moh 9 hardness. Ideal for applications requiring precise balls that are highly wear-resistant and chemically inert, they are suited for use as check valve elements, ball bearings, and spacers.

LISTED UNDER: Balls/Beads

Adhesive Tape (3253)

August 8, 2006 12:50 pm | Product Releases | Comments

Bioflex Rx1184P-2.4 is a durable, heavyweight fabric adhesive tape for direct skin medical device attachment. The product is specifically designed for bandages, insulin infusion sets, ECG electrodes, and TENS.

LISTED UNDER: Tapes | Die Cutting | Die Cutting

Foam Expands Material Choices for Medical Device Manufacturers

August 4, 2006 7:17 am | Product Releases | Comments

Reticulated polyurethane foam handles a wide range of medical and healthcare tasks with ease in devices ranging from blood oxygenators, transdermal patches, and EKG pads to pre-op sponges, surgical drapes, and neck braces.

LISTED UNDER: Foam | Compressor | Medical Device Testing

Guidewire Tubing

July 10, 2006 10:13 am | Pexco, LLC | Product Releases | Comments

A unique two-layer extruded medical grade tubing has been developed that allows guidewires used in vascular procedures to be inserted into the tubing faster and more efficiently, thereby reducing labor cost.

LISTED UNDER: Silicone | Nitinol | Nitinol

Dispensing Valve

July 10, 2006 10:13 am | Product Releases | Comments

The VMP30H is a multipurpose, mini-poppet pneumatic valve designed for controlled dispensing of low to high viscosity materials, such as silicones, RTV, epoxy, rubber adhesives, greases, and filled materials.

LISTED UNDER: Dispense | Control | Silicone

Liquid Silicone

July 7, 2006 8:43 am | Momentive Performance Materials Inc. | Product Releases | Comments

Company continues to create customized liquid silicone solutions for the healthcare industry. Two

LISTED UNDER: Silicone | Prototyping | Rapid Prototyping

Silicone-to-Plastic Molding

July 7, 2006 8:43 am | Product Releases | Comments

Select-Hesive LIMS are offered for silicone-to-plastic molding and eliminate costly assembly steps by allowing molders to utilize 2-shot or insert overmolding processes. The results are improved part quality and consistency, which allows for increased productivity and cost savings.

LISTED UNDER: Molding | Silicon Molding | Silicon Molding

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading