Advertisement

Visible Light Cure Adhesive

March 8, 2006 9:41 am | Product Releases | Comments

Loctite Visible Light Cure technology is an innovation that relies solely upon the visible light spectrum to deliver a safe, efficient, immediate cure for a broad array of medical device assembly applications.

LISTED UNDER: UV-or Light-Cure
Advertisement

Precious Metal Clad Products

February 9, 2006 8:45 am | Anomet Products, Inc. | Product Releases | Comments

Company’s products are metallurgically bonded to a core material to meet specific high-reliability requirements for contact- and corrosion-resistance, biocompatibility, or to simply reduce material cost.

LISTED UNDER: Precious Metals

Dispense Valve (2807)

February 9, 2006 8:45 am | Sealant Equipment & Engineering, Inc. | Product Releases | Comments

The model 2200-245-125 Tip-Seal dispense valve is designed for precision dispensing of low- to high-viscosity flowable materials. It is also used in high-speed stitching or repetitive on-off applications where short segments of material are deposited onto a surface.

LISTED UNDER: Dispense | Flow | Silicone

Chemical Resistant Tubing

February 6, 2006 10:30 am | Parker Texmed | Product Releases | Comments

A full line of chemical resistant tubing products extruded from TexFluor PTFE, FEP, PFA, or MFA is available for use in material handling applications such as delivery systems.

LISTED UNDER: PTFE

Heat-Cured Epoxy

February 6, 2006 10:30 am | Devcon | Product Releases | Comments

SC 2002 NS one-part epoxy adhesive bonds to a remarkable variety of substrates, including dissimilar substrates such as fabrics, steel (stainless, mild-carbon, galvanized, tin-plated, or unfinished), aluminum, ceramics, and glass.

LISTED UNDER: Epoxy

Molding Compound

February 6, 2006 10:29 am | Product Releases | Comments

Loctite ResinAid 3596 cures on exposure to UV or visible light of the right intensity. The molding compound produces tear resistant yet soft and conformable shells that deliver improved comfort and durability in the ear canal.

LISTED UNDER: Molding

Adhesive/Sealant

February 6, 2006 10:29 am | Master Bond, Inc. | Product Releases | Comments

Polymer System UV15X-6 is an optically clear, flexible UV curable adhesive/sealant that fully qualifies to the USP class VI protocol. It is a single component special urethane formulation which is 100% reactive and does not contain any volatiles.

LISTED UNDER: UV-or Light-Cure

Metal Fabrication (2653)

February 6, 2006 10:29 am | Fotofab Corp. | Product Releases | Comments

Precision metal parts can be delivered in as few as 24 hours with chemical etching. Working with over 50 metal alloys, the company continues to refine the photochemical machining process to produce custom precision metal parts.

LISTED UNDER: Metals

Liquid Silicone Rubber Resolves Precision Tubing Component Design Challenge

January 6, 2006 11:04 am | Product Releases | Comments

Zevex International Inc., a Salt Lake City, UT manufacturer of enteral nutrition products, chose GE–Silicones’ injection–molded LIM 6050-D2 liquid silicone rubber to design a complex, precision tubing component and solve a big challenge.

LISTED UNDER: Peristaltic | Air Pump | Silicone

Emphasis on Tooling: Guidelines for Ensuring Quality When Extruding Medical Devices

November 1, 2005 11:32 am | Guill Tool & Engineering Co., Inc. | Product Releases | Comments

Productivity and profitability are two important goals when working with extrusions. This exclusive report offers advice for producing extrusions that meet dimensional specifications and maintain specified minimum tolerances so that end products can be economically produced.

LISTED UNDER: Extrusion Equipment | Silicone

Emphasis on Coatings:Processing Considerationsfor Surface Modification Technologies

November 1, 2005 11:32 am | SurModics, Inc. | Product Releases | Comments

Performance, manufacturability, safety, and overall cost are crucial when selecting coating technologies, while ease of application, use of hazardous solvents, cycle time, and scrap rates are key when evaluating a coating’s manufacturing process.

LISTED UNDER: Device Coating | Surface Modification Coatings | Surface Modification

Variable-Ratio Meter Systems

September 30, 2005 11:38 am | Sealant Equipment & Engineering, Inc. | Product Releases | Comments

The Servo-Flo 105 variable-ratio meter system is designed for automated, robotic, or manual dispensing applications. This dual servomotor dispensing system allows variable dispense rates and easy adjustment of material ratios without costly mechanical equipment alterations.

LISTED UNDER: Silicone

Acrylic Multipolymer Compound

September 30, 2005 11:38 am | Evonik Cyro, LLC | Product Releases | Comments

Developed for injection molding applications, Vu-Stat Y-20 compound provides permanent electro-static dissipative (ESD) protection to medical devices where static attraction is a concern, such as needle hubs for bracheotherapy and spacers for dry powder pharmaceutical inhalation.

LISTED UNDER: Acrylics | Injection Molding

Machining Medical Devices

September 1, 2005 6:23 am | Product Releases | Comments

Machinists producing parts for medical device OEMs face demands for smaller parts, tighter tolerances, faster turnarounds, and new materials. This report, based on interviews with experts in the field, explores these and other topics.

LISTED UNDER: Precision Machining | CNC Machining | Micromachining

Flexible Magnet Material

August 31, 2005 11:50 am | Product Releases | Comments

Plastalloy material can be magnetized using various magnetization methods including conventional, two-poles each side, multiple-poles, or custom solutions to suit many medical and dental applications.

LISTED UNDER: Alloys

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading