Advertisement

Foam Expands Material Choices for Medical Device Manufacturers

August 4, 2006 7:17 am | Product Releases | Comments

Reticulated polyurethane foam handles a wide range of medical and healthcare tasks with ease in devices ranging from blood oxygenators, transdermal patches, and EKG pads to pre-op sponges, surgical drapes, and neck braces.

LISTED UNDER: Foam | Compressor | Medical Device Testing

Guidewire Tubing

July 10, 2006 10:13 am | Pexco, LLC | Product Releases | Comments

A unique two-layer extruded medical grade tubing has been developed that allows guidewires used in vascular procedures to be inserted into the tubing faster and more efficiently, thereby reducing labor cost.

LISTED UNDER: Silicone | Nitinol | Nitinol

Dispensing Valve

July 10, 2006 10:13 am | Product Releases | Comments

The VMP30H is a multipurpose, mini-poppet pneumatic valve designed for controlled dispensing of low to high viscosity materials, such as silicones, RTV, epoxy, rubber adhesives, greases, and filled materials.

LISTED UNDER: Dispense | Control | Silicone
Advertisement

Liquid Silicone

July 7, 2006 8:43 am | Momentive Performance Materials Inc. | Product Releases | Comments

Company continues to create customized liquid silicone solutions for the healthcare industry. Two

LISTED UNDER: Silicone | Prototyping | Rapid Prototyping

Silicone-to-Plastic Molding

July 7, 2006 8:43 am | Product Releases | Comments

Select-Hesive LIMS are offered for silicone-to-plastic molding and eliminate costly assembly steps by allowing molders to utilize 2-shot or insert overmolding processes. The results are improved part quality and consistency, which allows for increased productivity and cost savings.

LISTED UNDER: Molding | Silicon Molding | Silicon Molding

Epoxy (3125)

July 5, 2006 11:07 am | Master Bond, Inc. | Product Releases | Comments

The EP37-3FLSP polymer system is an optically clear, flexible, low viscosity two-part epoxy system for large volume castings. It features a long working life, low exotherm during cure, and very low shrinkage, as well as excellent dimensional stability.

LISTED UNDER: Epoxy | Casting

Gas Plasma: A Green Alternative for Surface Engineering

July 5, 2006 11:02 am | Product Releases | Comments

There are many methods with which to affect the surface of a material or device to achieve a desired effect. Therefore, factors related to the process such as environmental considerations or temperature concerns will reduce the number of possible options.

LISTED UNDER: Surface Modification | Vacuum | Cleanroom Assembly

Mix-Dispense Valve

May 2, 2006 8:29 am | Product Releases | Comments

The Model 2200-545-037 two-component miniature mix-dispense valve precisely dispenses miniature beads and very small volumes of low-viscosity pourable materials and abrasive or filled materials.

LISTED UNDER: Dispense | Miniature Valve | Flow
Advertisement

Hearing Aid Adhesive

May 2, 2006 8:28 am | Product Releases | Comments

Designed for vent channel formation and shell repair, Loctite 3691 ResinAid is a pink one-part acrylic adhesive that cures tack-free in less than 20 seconds on exposure to UV or visible light of the right intensity. In less than 10 seconds, this light cure product can cure to a thickness of 0.06 in.

LISTED UNDER: Acrylic

Molded Rubber/Silicone Components

May 2, 2006 8:28 am | Hiawatha Rubber Co. | Product Releases | Comments

Close tolerance, medical-application-specific molded rubber and silicone components and bonded rollers requiring special formulations and surface finishes are offered.

LISTED UNDER: Molded Rubber | Silicone

Fluoroplastic Introducers

April 18, 2006 7:27 am | Product Releases | Comments

Fluoroplastic tipped tubes are available to be used as IV or needle introducers. These tubes are designed with a tapered and/or beveled end to assist in the insertion of IVs and facilitate the transfer or extraction of fluids and can be laser marked for identification purposes.

LISTED UNDER: PTFE

Silicone Elastomers for Healthcare Tubing

April 4, 2006 7:38 am | Momentive Performance Materials Inc. | Product Releases | Comments

With the variety of tubing options available to medical device manufacturers, it is often difficult to determine which type would be best suited to a particular application.

LISTED UNDER: Silicone | Vacuum | Injection Molding

Environmentally Friendly Materials

March 8, 2006 10:20 am | Product Releases | Comments

Rogers Corp. has created a new “Green Leader” website, which contains information on the company’s environmentally friendly specialty materials and related subjects.

LISTED UNDER: Silicone

Visible Light Cure Adhesive

March 8, 2006 9:41 am | Product Releases | Comments

Loctite Visible Light Cure technology is an innovation that relies solely upon the visible light spectrum to deliver a safe, efficient, immediate cure for a broad array of medical device assembly applications.

LISTED UNDER: UV-or Light-Cure

Precious Metal Clad Products

February 9, 2006 8:45 am | Product Releases | Comments

Company’s products are metallurgically bonded to a core material to meet specific high-reliability requirements for contact- and corrosion-resistance, biocompatibility, or to simply reduce material cost.

LISTED UNDER: Precious Metals

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading