Silicone Hose

December 6, 2004 7:23 am | AdvantaPure | Product Releases | Comments

Color braid silicone hose offers a unique advantage for line identification. Incorporated into

LISTED UNDER: Silicone | Silicone

PTFE Coated Hypotubes

December 6, 2004 7:23 am | Product Releases | Comments

This PTFE coating service precisely applies PTFE onto the O.D. of stainless steel or nitinol hypotubes with 0.0001 in. to 0.0004 in. tolerance.

LISTED UNDER: Device Coating | Nitinol | Nitinol

Pre-Assembled Tubing Sets

December 6, 2004 7:23 am | Product Releases | Comments

Tubing sets made with PTFE tubing in 1/16 in. and 1/8 in. O.D. sizes are cut in the appropriate desired lengths and assembled with the distinctive, permanently attached, color-coded Ferrulok fitting system on one or both ends.


Tubing Assortment

December 6, 2004 7:23 am | Qosina | Product Releases | Comments

Company provides stock USP Class VI tubing in over 100 sizes, including Microbore Tygon PVC, PVC, silicone, and high pressure braided. The Microbore (80A Durometer) ranges in size from an ID of approximately 0.01 in. to 0.05 in. and is sold in coils 500 feet in length.

LISTED UNDER: PVC Tubing | Silicone | PVC Tubing

Rapid Protyping System Transforms Hearing Aid Development

December 6, 2004 6:45 am | Product Releases | Comments

The Project: To design, optimize, and produce better fitting hearing aids in less time. The Solution: Use CAD/CAM and 3D computer imaging to create custom devices in audiologist offices. These images show various angles of two hearing aid shells. One shell is on top of the other.

LISTED UNDER: Rapid Prototyping Equipment | Prototyping | Rapid Prototyping


November 3, 2004 9:24 am | Product Releases | Comments

A new handbook from GLS Corp., McHenry, IL, explains how to optimize adhesion in hard-soft overmolding. It details the benefits of soft-touch overmolding materials and provides tips on obtaining the best adhesion between hard substrates and soft TPEs.



November 2, 2004 6:07 am | Product Releases | Comments

Company manufactures both HEPA and ULPA filters for environments with the most stringent air purity requirements, including health care, pharmaceutical, laboratory, and others. Microguard 99 filters are available in 99.97%, 99.99%, and 99.999% efficiencies on 0.3 microns.

LISTED UNDER: Cellulosic


November 2, 2004 6:07 am | Product Releases | Comments

Medical device manufacturers can use these specialty monomers and polymers to "dial in" specific product attributes such as hardness, water permeability, biodegradability, and UV light absorbency.


Adhesive Tapes

November 2, 2004 6:07 am | Product Releases | Comments

The 3189 Series and 3474 Series are two lines of double-coated adhesive tapes that bond well to a variety of substrates, most notably ether foam. They are designed to bond to dissimilar materials.



November 2, 2004 6:07 am | Master Bond, Inc. | Product Releases | Comments

This high performance, two component epoxy adhesive/sealant, called EP34AN, features a thermal conductivity of 22-24 BTU/in/ft 2 /hr/&#176F. Physical properties are maintained even after long exposures to temperatures in the 400 to 450&#176F range.



November 2, 2004 5:41 am | Product Releases | Comments

This family of foams is designed for medical skin contact applications. The foams are specially formulated from the PORON, BISCO and Polyolefin lines, and are uniquely designed to meet internationally recognized skin contact ratings.


Cyanoacrylate Adhesives

November 2, 2004 5:41 am | Product Releases | Comments

Loctite Prism 4500 series next generation cyanoacrylate adhesives offer exceptionally fast cure speeds. Also, over the product's 21 month shelf life, cure speed will not degenerate measurably. The adhesives are less responsive to environmental variables such as humidity and temperature.

LISTED UNDER: Cyanoacrylate

Dispensing System

October 15, 2004 8:20 am | Product Releases | Comments

This dispensing system makes it easy for workers to apply precise amounts of thick assembly fluids like RTV silicones and epoxies through dispensing needles as small as 0.004 in. in diameter.

LISTED UNDER: Adhesive Dispensers | Silicone

Photo Etched Components

October 15, 2004 7:06 am | VACCO Industries | Product Releases | Comments

Company offers precision photo etched components to a vast array of markets. A wide variety of materials includes: nitinol, kapton, stainless steel, lead, titanium, copper, molybdenum, and nickel.

LISTED UNDER: Surface Modification | Nitinol

Surface Treatment Technology

October 15, 2004 7:03 am | Product Releases | Comments

The company's Plasma3&#153 is ideal for specialty applications requiring stringent surface specifications, improved hydrophilicity, and precise surface coating performance.

LISTED UNDER: Surface Modification | Hydrophilic Coating


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.