Dispense Valve (503)

March 4, 2004 5:50 am | Product Releases | Comments

The Dispensit&reg Model 1053-6 rod positive displacement dispense valve is designed for accurate, repeatable dispensing of shots and beads ranging from 0.002 ccs to 1.8 ccs in compliance with USP Class VI requirements.

LISTED UNDER: Dispense | Control | Flow

Thermal Conductive Epoxy

March 4, 2004 5:50 am | Master Bond, Inc. | Product Releases | Comments

Master Bond EP21AO is a two component, thermally conductive, electrically isolating epoxy adhesive with a forgiving 1 to 1 mix ratio by weight or volume. This compound is extremely versatile and will adhere well to a variety of similar and dissimilar substrates.

LISTED UNDER: Conductive

Check Valves (453)

March 4, 2004 5:50 am | Product Releases | Comments

These check valves' robust design provides for longer and enhanced performance with operating pressures from 0 to 10,000 psig with zero leakage. They are offered in sizes from 1/8 in. to 2.0 in., in a wide variety of connections, for both gases and liquids.

LISTED UNDER: Check | Gas Valve | Silicone

Temperature Resistant Epoxy

February 6, 2004 8:57 am | Master Bond, Inc. | Product Releases | Comments

This two-component epoxy system is for service above 500&#176F. Called EP125, the compound is designed to withstand exposure to boiling acids, alkalis, salts, fuels, and most organic solvents. It offers high bond strength to metallic and nonmetallic surfaces.


IV Filters

February 6, 2004 8:57 am | Qosina | Product Releases | Comments

These Adult IV Filters have acrylic housing with hydrophilic PES filters and hydrophobic PTFE vents. Part #28220 has a 0.2 micron membrane with clear housing. Part #28221 has a 1.2 micron membrane with transparent blue housing. The filters measure approximately 3 in. x 1/4 in. x 1-1/3 in.

LISTED UNDER: Hydrophilic Coating

Silicone Dispenser

February 6, 2004 8:46 am | Product Releases | Comments

The UltraSaver 1200 air-powered dispensing system makes it easy to apply accurate, consistent amounts of thick room temperature vulcanizer (RTV) silicones without hand fatigue, rework, or cleanup.

LISTED UNDER: Dispensers/Fillers | Silicone

Metal Fabrication

February 6, 2004 8:46 am | Product Releases | Comments

UAF has added metal fabrication capabilities to manufacture its latest, most sophisticated air filter frames and components. The heart of the department is Strippit&reg turrent punch presses and brake presses that integrate with automated adhesive dispensing and assembly workstations.

LISTED UNDER: Metals | Air Filter

Threadlocker Sticks

February 6, 2004 8:46 am | Product Releases | Comments

To simplify and improve product assembly, Henkel Loctite Corp. has introduced two popular threadlocking products in semi-solid stick form.


Chemical Fastener Adhesive

February 6, 2004 8:46 am | Product Releases | Comments

With longer shelf life and high structural strength, fast curing pre-applied PRECOTE&reg chemical fastener adhesives offer excellent vibration-resistant locking and sealing properties for a wide range of internal and external fastener applications in high technology industries.


December 4, 2003 7:19 am | Product Releases | Comments

NAS and ZYLAR are clear, tough, acrylic copolymers that deliver excellent performance and lower total cost for medical device molders. Easy to process and decorate, NAS and ZYLAR give designers worldwide an alternative to the most demanding medical device and component applications.


December 4, 2003 7:19 am | Sunlite Plastics | Product Releases | Comments

Sunlite Plastics, Inc. has been manufacturing high quality extrusions since 1996. Today, the company is a major supplier of tubing related extrusion to medical device manufacturers worldwide. Sunlite owns and operates two state-of-the-art extrusion facilities.

LISTED UNDER: Extrusion | Multilumen Tubing | Coextrusions/Paratubing

December 4, 2003 7:19 am | MRPC | Product Releases | Comments

Molded Rubber & Plastic Corporation: Vision, Innovation & Technology We are a contract manufacturer of custom molded and finished rubber, plastic, and extruded silicone products.

LISTED UNDER: Elastomers | Prototyping | Laser Machining

December 4, 2003 7:19 am | Master Bond, Inc. | Product Releases | Comments

Master Bond, Inc. has a comprehensive, easy to navigate web site devoted to our line of high performance adhesives, sealants, coatings, and encapsulants. Our compounds are successfully employed in the manufacturing of both disposable and reusable medical devices.


Precision Molded Components

November 5, 2003 6:10 am | Product Releases | Comments

Company specializes in the development and manufacture of plastic medical and laboratory components, such as luer and tubing connectors, with a full R&D capacity for custom components. Its line of over 2500 components is available in a multitude of configurations.

LISTED UNDER: Molding | Product R&D

Rapid Molding

September 5, 2003 10:46 am | Product Releases | Comments

The ZA-12 casting process is ideal for the manufacture of high-precision components for medical equipment.

LISTED UNDER: Molding | CNC Machining | Prototyping


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.