Advertisement

New Needle-Bonding Adhesives Cure Fast for Increased Throughput

June 10, 2013 5:16 pm | by MDT Staff | Dymax Corporation | Product Releases | Comments

A new family of LED-curable needle-bonding adhesives from Dymax has been formulated to cure at speeds typically associated with today’s best automation equipment and line speeds. Typical cure time for the 1400 series is 2.5 seconds or less, allowing for increased production speed and throughput, lower processing costs...

LISTED UNDER: UV-or Light-Cure
Advertisement

Composite Clad Metal Wire Replaces Pure Platinum, Gold, Silver

June 5, 2013 5:25 pm | by MDT Staff | Anomet Products, Inc. | Product Releases | Comments

Composite clad metal wire that can be formulated to improve the performance characteristics of precious metal solid wire at a small fraction the cost is available from Anomet Products. Anomet Precious Metal Clad Wire can be formulated to accentuate specific performance characteristics such as strength, radiopacity and corrosion-, contact-, or temperature-resistance. 

LISTED UNDER: Metals

Radiopaque Tubing

June 5, 2013 5:01 pm | Extrusion Alternatives, Inc. | Products

Radiopaque Tubing

LISTED UNDER: Extrusion | Product R&D | Prototyping

IV Sets

June 5, 2013 4:49 pm | Extrusion Alternatives, Inc. | Products

IV Sets

LISTED UNDER: Extrusion | Product R&D | Prototyping

Guidewire

June 5, 2013 4:44 pm | Extrusion Alternatives, Inc. | Products

Guidewires

LISTED UNDER: Extrusion | Product R&D | Prototyping

Needle & Sharps Guards

June 5, 2013 4:38 pm | Extrusion Alternatives, Inc. | Products

Needle & Sharps Guards

LISTED UNDER: Extrusion | Product R&D | Prototyping

Parylene conformal coatings

June 4, 2013 2:57 pm | Specialty Coating Systems | Products

With 11 locations around the world, SCS is the leader in ultra-thin, biocompatible Parylene conformal coating services and technologies and is pleased to announce SCS microRESIST™ Antimicrobial Parylene Technology.

LISTED UNDER: Device Coating | Surface Modification | Antimicrobial

GW Silicones

June 3, 2013 3:25 pm | GW Plastics, Inc. | Products

GW Silicones, a division of GW Plastics, Inc., delivers cost-effective, single-source solutions for precision Liquid Injection Molding (LIM) and manufacture of Liquid Silicone Rubber (LSR) components and assemblies. GW Silicones specializes in application-specific material selection, product design and development, in-house precision tooling, and advanced Liquid Injection Molding (LIM) technologies designed to eliminate waste and ensure the highest quality products. Along with a variety of contract manufacturing services such as heat curing, sterilization, assembly, pad printing, and packaging, GW Silicones is a trusted partner for quick prototypes, flawless launch and reliable continuous production.

LISTED UNDER: Injection Molding | Insert Molding | Molding

PVC Medical Technologies for IV Tubes, Medical Bags, and Medical Garments

May 29, 2013 3:40 pm | by MDT Staff | Product Releases | Comments

The Lubrizol Corporation’s LifeScience Polymers business will showcase its advanced wound care tapes, films and dressings, as well as its non-polyvinyl chloride (PVC) medical technologies for IV tubes, medical bags and medical garments/drapes at the 2013 CHINAPLAS International Exhibition on Plastics and Rubber Industries.

LISTED UNDER: PVC Tubing | Polymers

High Performance Ceramic for Increased Life-Span of Orthopedic Implants

May 24, 2013 2:32 pm | by MDT Staff | Product Releases | Comments

Innovnano has developed 3 mol % yttria stabilised zirconia powder (3YSZ) – an advanced technical ceramic with medical device applications. Thanks to a uniform nanostructure and formation of a high stability phase under pressure, Innovnano’s 3YSZ combines extreme component strength and fracture-resistance with enhanced biocompatibility...

LISTED UNDER: Ceramic

Addition Cured Silicone for Biocompatibility and Cytoxicity

May 21, 2013 2:43 pm | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

The MasterSil 153Med has been introduced by Master Bond. The two part silicone with a paste consistency features a convenient one to one mix ratio by weight, and does not require exposure to air and humidity for cross-linking. It has a long working life of 5-7 hours and will not outgas while curing.

LISTED UNDER: Silicone

PE Resin Blend Sheet Foam with Multidirectional Stretch

May 21, 2013 2:25 pm | by MDT Staff | Pregis Corporation | Product Releases | Comments

Pregis has introduced Stretchfoam, an “industry first” proprietary polyethylene (PE) resin blend sheet foam with multidirectional stretch for protective packaging applications. Stretchfoam represents the latest addition to the company’s Microfoam line.

LISTED UNDER: Resin | Polyethylenes | Other Packages

New Service Provides Molds and Functional Silicone

May 9, 2013 2:57 pm | by MDT Staff | Sil-Pro, LLC | Product Releases | Comments

Sil-Pro has announced new capability to produce tooling and functional prototype silicone or thermoplastic parts within 3 to 5 days. This new capability is of great benefit for the medical device community and has been thoroughly tested by Sil-Pro for the last year.

LISTED UNDER: Thermoplastic Elastomers

Carbon Comps Ideal for High Energy Load Dump Applications

May 7, 2013 4:32 pm | by MDT Staff | Stackpole Electronics, Inc. | Product Releases | Comments

Stackpole’s RC series is an axial leaded carbon composition technology available in 1/4W, 1/2W, and 1W power ratings. The RC’s dense carbon slug element handles high-energy surges much better than metal film based surge resistors.

LISTED UNDER: Resistors | Carbon | Composites

TPE Grade for Nylon 6,6 Overmolding

May 3, 2013 4:44 pm | by MDT Staff | Star Thermoplastics | Product Releases | Comments

A newly formulated TPE (thermoplastic elastomer) developed expressly for overmolding onto Nylon 6,6 and offering a combination of benefits that combine the benefits of price, performance and appearance, is now available from STAR Thermoplastic Alloys & Rubbers, Inc. (STAR).

LISTED UNDER: Thermoplastic Elastomers

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading