Advertisement

Micro Waterjet

February 21, 2014 12:03 pm | RepExact, LLC | Products

Micro Waterjet uses its proprietary equipment to cut precision components from flat materials with no heat effects, with kerf widths down to 8 thous (200 µm). An alternative to laser and wire EDM where heat must be avoided. Wide variety of suitable materials includes stainless, Nitinol, CF, Teflon®, and PEEK. Equipment also for sale.

LISTED UNDER: Composites | Foam | Nitinol

Rigid, Abrasion Resistant Two Component Epoxy

February 20, 2014 5:13 pm | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Engineered with a silicon carbide filler material, Master Bond EP21SC-1 delivers abrasion resistance for an array of chemical and mechanical processing applications. This epoxy has a smooth paste consistency and a non-critical one to one mix ratio by weight or volume...

LISTED UNDER: Epoxy

EMI Shielding Material for Precision Die-Cuts

February 12, 2014 4:39 pm | by MDT Staff | Product Releases | Comments

Many electronic enclosures have gaps that allow unwanted RF and electromagnetic interference to escape into the surrounding environment. These openings are commonly found around the I/O panel, backplane and access panels of the enclosure...

LISTED UNDER: Conductive | Foam | Other
Advertisement

Medical Materials Innovation Showcasing at MD&M West 2014

February 12, 2014 4:31 pm | by MDT Staff | Product Releases | Comments

At the MD&M West event in Anaheim, California, the Electronics Group of Henkel will show visitors why it is the leading materials innovator for medical device manufacture. From booth #453, Henkel will showcase some of its most recent materials developments...

LISTED UNDER: Other

Copolyester, Styrene-free Material is Cost-effective

February 11, 2014 1:32 pm | by MDT Staff | Product Releases | Comments

Eastman Chemical Company is enhancing its medical packaging portfolio with Eastalite copolyester, the company’s first opaque offering. The material complements the company’s other medical packaging copolyester offerings: Eastman Eastar 6763 and Tritan MP100...

LISTED UNDER: PETG Copolyesters

Improved PEEK Wear Compounds

February 7, 2014 5:02 pm | by MDT Staff | Product Releases | Comments

Lehvoss North America, a subsidiary of Lehmann & Voss, has introduced LUVOCOM 8000, a new series of PEEK wear compounds. By substituting traditionally used PTFE with new proprietary additives, the company has made it possible to further elevate the wear resistance of PEEK compounds...

LISTED UNDER: PEEK, PEK

Protecting Skin with Gentle Adhesives Requires an Experienced Medical Converter

February 4, 2014 5:30 pm | by MDT Staff | Fabrico, Inc. | Product Releases | Comments

Fabrico Medical now offers low trauma silicone adhesives from 3M for gentle skin interface. Low trauma soft silicones from 3M provide good adhesion to a variety of skin types, including the fragile skin conditions of the very old and very young.

LISTED UNDER: Silicone

New Medical Elastomers for Wire and Cable Outperform TPVs

February 4, 2014 5:10 pm | by MDT Staff | Product Releases | Comments

Minnesota Wire has replaced the thermoplastic vulcanizate (TPV) elastomers that are standard in such applications with new styrenic thermoplastic elastomer (TPE-S) compounds from Teknor Apex Company, citing better performance initially and after autoclaving, superior processing, and an enhanced look and feel in the end product...

LISTED UNDER: Elastomers
Advertisement

COC Injection Molding Grade with Internal Mold Release

January 29, 2014 3:46 pm | by MDT Staff | Product Releases | Comments

TOPAS Advanced Polymers has expanded its line of TOPAS 5013 cyclic olefin copolymer (COC) resins for injection molding of high-performance components for the optical, diagnostic, and microfluidic markets. The new grade, TOPAS 5013L-10, has won strong early acceptance...

LISTED UNDER: Cyclic Olefin Copolymer (COC)

High Frequency, Fine Pitch Piezoelectric Composite

January 28, 2014 3:45 pm | by MDT Staff | Product Releases | Comments

Morgan Advanced Materials has announced the launch of a new range of piezoelectric composite components, ideal for applications where high performance is critical, including medical imaging, doppler flow, and military and commercial sonar. Components manufactured with Piezo composite materials offer improved acoustic performance...

LISTED UNDER: Composites

Non-Drip, One Component Silicone Offers High Temperature Resistance

January 27, 2014 3:55 pm | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Placing an emphasis on convenient handling, Master Bond MasterSil 705TC features a paste consistency that doesn’t require mixing. This single component system sets up in 7 minutes and has a non-corrosive cure at room temperature when exposed to atmospheric humidity.

LISTED UNDER: Silicone

Catheter Adhesive Provides Easy Cure Confirmation and Post-Cure Inspection

January 27, 2014 3:06 pm | by MDT Staff | Product Releases | Comments

212-CTH-UR-SC is the latest in a series of Dymax adhesives to be formulated with both Ultra-Red and patented See-Cure technologies. It’s designed for use in catheter assembly and offers excellent bond strength to a variety of substrates including platinum and polycarbonate...

LISTED UNDER: UV-or Light-Cure

Digital High-rigidity Material for 3D Printers

January 14, 2014 5:36 pm | by MDT Staff | Product Releases | Comments

Stratasys has debuted the second generation of its Digital ABS material, named Digital ABS2. The new material, designed for Stratasys PolyJet 3D Printers, is designed to enable users to produce thin-walled models with high dimensional stability. It is now available in ivory in addition to the existing green color.

LISTED UNDER: Additive Manufacturing | ABS

Functional Polymer Remains Strong and Transparent

January 13, 2014 12:29 pm | by MDT Staff | Product Releases | Comments

TPX polymethylpentene is a lightweight, transparent, semi-crystalline material with outstanding resistance to both steam sterilization and a wide range of chemicals. Unlike some polymeric materials that discolor or embrittle after just a few cycles in an autoclave, TPX remains transparent and strong.

LISTED UNDER: Polymers

Dimensionally Stable Two Component Urethane Modified Epoxy Gel

January 13, 2014 12:22 pm | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Primarily used for potting and encapsulation applications, Master Bond Super Gel 9AO is a  soft, urethane modified gel-like epoxy that offers thermal conductivity and electrical insulation properties. This two part system is also employed for bonding and sealing as it adheres well to a variety of substrates including metals, glass, ceramics and many rubbers and plastics.

LISTED UNDER: Epoxy | Urethane

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading