Advertisement
Materials

PEEK Molded Medical Components

August 19, 2014 2:31 pm | by MDT Staff | Minnesota Rubber & Plastics | Product Releases | Comments

Medical components custom molded of PEEK from Minnesota Rubber and Plastics (MR&P) improve performance while reducing costs. The company has proven experience...

LISTED UNDER: Injection Molding | Molding | PEEK, PEK

Highly Conformable TIM

August 15, 2014 2:33 pm | by MDT Staff | Fujipoly America Corp. | Product Releases | Comments

Fujipoly announced the expansion of its Sarcon XR-Pe product offering with the availability of a 1.0 mm thick sheet. Sarcon XR-Pe delivers a remarkable thermal conductivity of 11 W/m°K (ASTM D 5470) with a thermal resistance as low as .06°Cin2/W...

LISTED UNDER: Heat Exchangers | Conductive

One Component, Snap Cure Epoxy Features High Strength Properties

August 6, 2014 3:15 pm | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Suitable for a variety of applications in the electronic, aerospace and OEM industries, Master Bond EP3SP5FL is a single component epoxy that cures in 1-2 minutes at 300°F...

LISTED UNDER: Epoxy
Advertisement

Orthotics & Prosthetics Grade Thermoplastic Sheet Materials

August 6, 2014 12:20 am | by MDT Staff | Product Releases | Comments

SIMONA America announced the availability of seven thermoplastic sheet materials to meet diverse requirements for strength and stiffness in orthopedic applications...

LISTED UNDER: Sheet/Film | Polypropylenes

Durable, Colorable, Silky Elastomers Proven Safe for Skin Contact in Wearable Electronics

August 5, 2014 12:59 am | by MDT Staff | Dow Corning Corp. | Product Releases | Comments

Dow Corning announced that its TPSiV 4000 and TPSiV 4200 Thermoplastic Elastomers (TPEs) have been shown to be safe for skin contact applications in two independent medical test protocols...

LISTED UNDER: Thermoplastic Elastomers

Polymer Neutral Portfolio of Compounds

July 30, 2014 4:35 pm | by MDT Staff | Teknor Apex Company | Product Releases | Comments

In an innovative approach to the Asian market for medical compounds, Teknor Apex has restructured its extensive product portfolio with the goal of offering device designers and manufacturers a multiplicity...

LISTED UNDER: Materials | Polymers

Durable, Colorable, Elastomers Are Proven Safe for Skin Contact in Wearable Electronics

July 29, 2014 11:43 am | Dow Corning Corp. | Product Releases | Comments

Dow Corning announced that its TPSiV 4000 and TPSiV 4200 Thermoplastic Elastomers (TPEs) have been shown to be safe for skin contact applications in two independent medical test protocols. The results offer strong independent validation that these industry-leading materials are an excellent option for skin-safe wearable electronics applications, such as wrist bands for smart watches and fitness trackers, as well as for device accessories such as ear buds.

LISTED UNDER: Plastics & Elastomers | Thermoplastic Elastomers

Injection Moldable Thermoplastic Composites

July 23, 2014 10:58 pm | by MDT Staff | Piper Plastics Inc. | Product Releases | Comments

The new Kyron MAX series from Piper Plastics bridges the performance gap between components produced via standard injection molding compounds and pre-preg lay-up composite materials...

LISTED UNDER: Polymers
Advertisement

Versatile Grade TPU for Injection Molding

July 14, 2014 9:05 pm | by MDT Staff | Product Releases | Comments

APS Elastomers has developed a versatile thermoplastic polyurethane specifically formulated for injection molding applications. The polyester-based TPU exhibits excellent abrasion resistance and toughness and has good hydrolytic stability, oil, fuel and solvent resistance...

LISTED UNDER: Elastomers | Polyurethanes | Thermoplastic Elastomers

Low Viscosity, Two-Component Epoxy

July 9, 2014 9:32 pm | by MDT Staff | Master Bond, Inc. | Product Releases | Comments

Master Bond EP112LS is a two-part epoxy that is well suited for impregnation, potting, encapsulation, sealing and coating applications, particularly in the aerospace and optoelectronics industries. EP112LS is optically clear, features reliable non-yellowing propertie...

LISTED UNDER: Epoxy

Medical Color Concentrate Line

June 30, 2014 5:22 pm | by MDT Staff | Compounding Solutions | Product Releases | Comments

Compounding Solutions has announced the launch of a new line of medical grade color concentrates to better serve their current and future medical customers. These color concentrates are the first of several new product lines that the company is...

LISTED UNDER: Molding | PEBA Copolymers

PiezoPaint(TM)

June 30, 2014 12:58 pm | Piezo Technologies | Products

Meggitt Piezo Technologies brings novel technology as an attractive alternative to bulk, weight, and complicated wiring with PiezoPaint(TM), a highly flexible piezoceramic material enabling direct deposition on a variety of materials, plastics, and polymers using available printing techniques, such as screen printing or pad printing. PiezoPaint(TM) is a solution that can provide you the volumetric structure for an array with high sensitivity at extremely low processing temperatures. Its flexibility of use and ultra-low weight can make PiezoPant(TM) an attractive solution for your emerging application in ultrasound or HiFU.

LISTED UNDER: Crystals/Oscillators/Piezoelectrics | Flow | Probes

Flexible Color Digital Materials for Realistic 3D Printing

June 29, 2014 4:32 pm | by MDT Staff | Stratasys Inc. | Product Releases | Comments

Stratasys released a previously announced extension to its range of flexible and rigid material options for the Objet500 Connex3 Color Multi-material 3D Printer...

LISTED UNDER: Other

TPU Improves Post-Processing Operations

June 26, 2014 11:52 pm | by MDT Staff | Product Releases | Comments

APS Elastomers’ latest thermoplastic polyurethanes provides good aesthetics, low tackiness and process efficiency for use in film, sheet, and extrusion coating and cured-in-place pipe applications...

LISTED UNDER: Polyurethanes | Thermoplastic Elastomers

High-Performance Polyamides for Mobile Healthcare

June 25, 2014 11:44 pm | by MDT Staff | Solvay Specialty Polymers | Product Releases | Comments

Solvay Specialty Polymers has introduced a new family of Kalix high-performance polyamides (HPPAs) for structural components used in mobile healthcare (mHealth) electronic devices..

LISTED UNDER: Polymers

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading