Advertisement
Foam

Micro Waterjet

February 21, 2014 12:03 pm | RepExact, LLC | Products

Micro Waterjet uses its proprietary equipment to cut precision components from flat materials with no heat effects, with kerf widths down to 8 thous (200 µm). An alternative to laser and wire EDM where heat must be avoided. Wide variety of suitable materials includes stainless, Nitinol, CF, Teflon®, and PEEK. Equipment also for sale.

LISTED UNDER: Composites | Foam | Nitinol

EMI Shielding Material for Precision Die-Cuts

February 12, 2014 4:39 pm | by MDT Staff | Product Releases | Comments

Many electronic enclosures have gaps that allow unwanted RF and electromagnetic interference to escape into the surrounding environment. These openings are commonly found around the I/O panel, backplane and access panels of the enclosure...

LISTED UNDER: Conductive | Foam | Other

Nylon Foam Sheets Mold Into Simple or Highly-Complex Shapes

August 9, 2013 5:35 pm | by MDT Staff | Product Releases | Comments

Pres-On is bringing manufacturers a cost-effective alternative to silicone foam with its N3000, a lightweight, closed cell, cross linked foam based on Nylon 6. It is offered in 39" x 78" sheets in thicknesses ranging from 1/16-inch to 1/2-inch, and can be specified with or without an acrylic adhesive.

LISTED UNDER: Foam | Nylons
Advertisement

Precision Die Cutting Produces Medical Parts to Specification

February 7, 2013 4:07 pm | by MDT Staff | Product Releases | Comments

If you need custom fabricated precision filters, gaskets, membranes, seals, shields, spacers, and related parts for medical applications, check with Interstate Specialty Products, Inc.

LISTED UNDER: Die Cutting | Plastic | Sheet/Film

Medical Foam Tape Offers Patient Comfort, Superior Breathability

April 27, 2012 6:58 am | Product Releases | Comments

Avery Dennison Medical Solutions has developed a new highly breathable and conformable medical foam tape that provides comfortable, breathable securement and can serve as a backing...

LISTED UNDER: Tapes | Foam

Copper Foam Offers Significant Design and Functional Advantages

December 13, 2011 11:41 am | Product Releases | Comments

Copper foam, now available from Goodfellow, combines the outstanding thermal conductivity of copper with the structural benefits of a metal foam.

LISTED UNDER: Foam

Die Cut Foam Parts Match Application Requirements

May 11, 2011 6:11 am | Product Releases | Comments

Custom die cut foam parts precision made from open- and closed-cell and sponge foams for a wide range of applications are being introduced by Interstate Specialty Products...

LISTED UNDER: Foam | Silicone | Die Cutting

Ultrasonic Perforating of Foam-Based Wound Dressings

November 11, 2010 6:11 am | Product Releases | Comments

Ultrasonic perforation technology allows a two to three times faster production speed compared to heat perforation systems. Additionally the product quality remains constant even at varying speeds during the start-up and deceleration phases of the machine.

LISTED UNDER: Foam | Piezoelectrics
Advertisement

Acoustical Foams Silence Medical Equipment

April 16, 2009 12:57 pm | Product Releases | Comments

Acoustical foams for medical devices are available in several thicknesses and densities, with facings to tune the absorption spectrum and compensate for environmental conditions such as temperature and moisture.

LISTED UNDER: Foam

Reticulated Foams Maximize Surface Area-to-Volume Ratio

January 12, 2009 12:25 pm | Product Releases | Comments

Metal, carbon and ceramic reticulated foams&#151low-density, permeable structures of cells and continuous ligaments&#151are available in small quantities to researchers and design engineers.

LISTED UNDER: Foam

Foam Expands Material Choices for Medical Device Manufacturers

August 4, 2006 7:17 am | Product Releases | Comments

Reticulated polyurethane foam handles a wide range of medical and healthcare tasks with ease in devices ranging from blood oxygenators, transdermal patches, and EKG pads to pre-op sponges, surgical drapes, and neck braces.

LISTED UNDER: Foam | Compressor | Medical Device Testing

Foams

November 2, 2004 5:41 am | Product Releases | Comments

This family of foams is designed for medical skin contact applications. The foams are specially formulated from the PORON, BISCO and Polyolefin lines, and are uniquely designed to meet internationally recognized skin contact ratings.

LISTED UNDER: Foam

Medical Foam

September 3, 2004 5:30 am | Product Releases | Comments

Rynel, Inc. has developed a molding process that allows its bio-compatible foam to be formed into small, highly-detailed, three-dimensional components.

LISTED UNDER: Foam | Die Cutting
X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading