Advertisement

Medical Parts Are Photo Etched

October 26, 2010 7:17 am | Product Releases | Comments

Tech-Etch has added to its manufacturing of light-gauge, metal parts for the medical industry through photo chemical etching, a process that produces intricate components with close tolerances.

LISTED UNDER: Nitinol | Transducers | Metal Filter

Microprecision Contract Manufacturing of Medical Devices and Implants

September 24, 2010 10:02 am | Norman Noble, Inc. | Product Releases | Comments

Norman Noble, Inc. is a single source for microprecision contract manufacturing of medical devices and implants. Its experienced engineers and technicians develop manufacturing processes for the most challenging of projects.

LISTED UNDER: Full Service Contract Manufacturing | Micromachining | Laser Machining

Photo Etching Tungsten for Medical Applications

July 16, 2010 7:05 am | Product Releases | Comments

Tech-Etch specializes in the photo chemical etching of tungsten. Because tungsten is extremely dense, 71% heavier than lead, it is used in medical applications, which include grids used to collimate and attenuate stray x-rays in CT scanners...

LISTED UNDER: Photo Etching | Nitinol
Advertisement

InnerPulse to Utilize Realistic Simulation from Dassault Systèmes

July 7, 2010 11:07 am | Product Releases | Comments

Sudden cardiac death (SCD) remains a major threat despite advances in medication and other treatments. According to the Sudden Cardiac Arrest Association, approximately one American life is lost every two minutes and it has been estimated that SCD claims more than 7,000,000 lives per year worldwide–the overwhelming majority of those deaths are caused by ventricular fibrillation, or rapid, uncoordinated contractions.

LISTED UNDER: Nitinol

Wytech Provides Solutions to Prototyping and Immediate Medical Wire Needs

February 5, 2010 10:55 am | Wytech Industries, Inc. | Product Releases | Comments

Wytech Industries Inc., a world leader in the manufacture of fine wire and tubing components for the medical device industry, offers two services to accommodate immediate needs.

LISTED UNDER: Wire Forming | Prototyping | Rapid Prototyping

RepExact Adds Processed Micro Tubing

February 2, 2010 4:23 am | RepExact, LLC | Product Releases | Comments

RepExact (MD&M West Booth 3273) announces exclusive North American representation of Siewal Microtubes SA, a Switzerland-based leading laser and mechanical processor of thin-wall metal microtubing.

LISTED UNDER: Metal | Nitinol | Nitinol

Company Expands Grinding Services

October 21, 2009 5:32 am | Techdevice Corporation | Product Releases | Comments

TechDevice (Booth 860), a developer and manufacturer of balloons, catheters, guidewires, and components, has expanded its grinding capabilities and capacity with the recent investment and focus on precision grinding.

LISTED UNDER: Grinding | Prototyping | Nitinol

Norman Noble Launches Next Generation Noble UltraLight Lasermachining Technology

October 15, 2009 6:37 am | Norman Noble, Inc. | Product Releases | Comments

Medical device contract manufacturer Norman Noble Inc. (Booth 1113) has launched Noble UltraLight,

LISTED UNDER: Laser Machining | Laser Machining | Nitinol
Advertisement

Wire Improves Cardiovascular Catheter Manufacturing

January 14, 2009 9:25 am | Applied Plastics Co. Inc. | Product Releases | Comments

This Teflon coated extrusion wire is fabricated using a proprietary etching process that eliminates flaking and permits over 25% elongation to keep the catheter's inside diameter clean. Supplied spooled or cut to length, this fine extrusion wire features a 0.

LISTED UNDER: Wire and Cable | Nitinol

PTFE-Coated Nitinol Tube

January 10, 2008 10:59 am | Applied Plastics Co. Inc. | Product Releases | Comments

This PTFE-coated nitinol tube features a highly lubricious coating while maintaining the kink-resistant characteristics of the nitinol tube and can be processed in sizes from 0.002 inches O.D. up and lengths to 10 ft.

LISTED UNDER: Nitinol | Nitinol

Photo Etched Filters

January 18, 2007 11:37 am | Product Releases | Comments

Company specializes in the manufacture of small, light-gauge metal parts through photo chemical etching, a process that produces intricate components with close tolerances. It is setting industry standards fabricating a variety of components, including filters.

LISTED UNDER: Surface Modification | Nitinol | Metal Filter

Teflon Forming Mandrels

January 18, 2007 11:36 am | Applied Plastics Co. Inc. | Product Releases | Comments

PTFE Natural Non-Flake Forming Mandrels can withstand 550&#176F continuous temperatures, with excursions to 700&#176F, for manufacturing small diameter extruded tubing, formed rubber bladders, and similar products. Providing a 0.

LISTED UNDER: Other | Nitinol | Nitinol

Guidewire Tubing (3539)

November 6, 2006 11:11 am | Pexco, LLC | Product Releases | Comments

A unique two-layer extruded medical grade tubing allows guidewires used in vascular procedures to be inserted into the tubing faster and more efficiently, thereby reducing labor cost.

LISTED UNDER: Coextrusions/Paratubing | Nitinol | Nitinol

Nitinol/Zirconium Fabrication

November 6, 2006 10:37 am | Fotofab Corp. | Product Releases | Comments

Company offers the manufacturing of custom nitinol and zirconium components to its list of fabrication capabilities. Both medical-friendly metals are imperative to the medical market because of their superior strength and biocompatibility characteristics.

LISTED UNDER: Metals | Nitinol

Guidewire Tubing

July 10, 2006 10:13 am | Pexco, LLC | Product Releases | Comments

A unique two-layer extruded medical grade tubing has been developed that allows guidewires used in vascular procedures to be inserted into the tubing faster and more efficiently, thereby reducing labor cost.

LISTED UNDER: Silicone | Nitinol | Nitinol

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading