Advertisement
Cable Assemblies

Electro-Mechanical Box Build

April 21, 2015 10:38 am | by Aved Electronics, Inc. | Product Releases | Comments

Custom engineered, sourced, and manufactured electro-mechanical box build assemblies and integrated interconnecting cables for early stage companies are being introduced by Aved Electronics, Inc. of North Billerica, MA. Aved Electro-mechanical Box...

LISTED UNDER: Electromechanical/Mechanical Devices | Cable Assemblies

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

March 4, 2015 1:10 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10v to 1500v DC, or 10v to 1000v RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Wire and Cable

Light Director™ Guided Assembly System: A CableEye® Accessory

March 4, 2015 12:52 pm | CAMI Research, Inc. | Products

For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Assembly Equipment
Advertisement

CableEye® M3U Cable Tester System: Item 821U

March 4, 2015 12:46 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Wire and Cable

Microwave/RF Assembly Calculator

January 16, 2015 11:18 am | by W.L. Gore & Associates | W.L. Gore & Associates | Product Releases | Comments

W. L. Gore & Associates has introduced an online tool designed to complement the existing GORE Microwave/RF Assembly Builder. The new GORE Microwave/RF Assembly Calculator is used to calculate insertion loss, VSWR and other parameters of GORE Microwave/RF Assemblies for different cable types. The Calculator is particularly useful when the initial cable...

LISTED UNDER: Cable Assemblies

Custom Tuned and Terminated Micro-coaxial Assemblies for Ultrasound Applications

December 18, 2014 6:18 pm | by High Speed Interconnects | High Speed Interconnects | Product Releases | Comments

High Speed Interconnects (“HSI”), a full service extruder and manufacturer of high performance coaxial cable and assemblies, has recently announced custom, fine-wire and fine-pitch diagnostic imaging assemblies for medical device OEMs producing next-generation ultrasound equipment. HSI’s proprietary extrusion capabilities produce fine-wire coaxial cables...

LISTED UNDER: Cable Assemblies

Bundled Cable Assemblies for Hirose, IPEX, and JAE Connectors

November 19, 2014 10:35 am | by High Speed Interconnects | High Speed Interconnects | Product Releases | Comments

High Speed Interconnects has recently announced the capability to create endless bundled coaxial cable constructions which exceed today’s complex interconnect requirements. HSI’s micro coaxial cable capabilities range from 32-48 AWG and can be bundled into high-density cable constructions in excess of 1,500 conductors, while preserving important electrical characteristics such as impedance, ...

LISTED UNDER: Cable Assemblies

Custom Interventional Catheter Assemblies

November 3, 2014 4:30 pm | by MDT Staff | High Speed Interconnects | Product Releases | Comments

High Speed Interconnects has recently announced the capability to create custom, micro-miniature interventional catheter assemblies with fine wire, direct-to-board terminations down to 0.175 mm pitch. This enhanced capability provides medical device companies seeking less invasive and more stable solutions the opportunity to further reduce the size of their catheterization products. With app...

LISTED UNDER: Cable Assemblies
Advertisement

Cable Assembly Integrated Solutions

October 29, 2014 7:20 pm | by MDT Staff | ODU-USA, Inc. | Product Releases | Comments

With its expansion into the US market, ODU-USA has the capability of supplying its cable assembly solutions and capabilities for medical and military applications worldwide. ODU’s exceptional engineering standards ensure the highest level of cable design and performance...

LISTED UNDER: Product R&D | Cable Assemblies | Wire and Cable

Low-loss, flexible cables rival semi-rigid

July 25, 2014 4:54 pm | Product Releases | Comments

High Speed Interconnects (Scottsdale, AZ) has announced a new range of flexible cable assemblies which outperform semi-rigid cable performance. Combining advanced coaxial cable and proprietary VP90 expanded PTFE (ePTFE) extrusion technologies, HSI is able to…

LISTED UNDER: Packaging and Interconnects | Cable Assemblies | Wire and Cable

Micro Coaxial Cable Assemblies

May 23, 2014 8:00 am | by MDT Staff | Product Releases | Comments

High Speed Interconnects (HSI), a full service cable extrusion and coaxial assembly manufacturer, announces increasing capabilities to solve custom, small form factor interconnect challenges. As engineers face the competing pressures of less...

LISTED UNDER: Cable Assemblies | Wire and Cable

Cable & Harness Assembly Services

May 23, 2014 8:00 am | by MDT Staff | Product Releases | Comments

OSI OptoElectronics (OSIO), an OSI Systems Company and global supplier of high performing standard and OEM photodiodes, high power light sources, and turnkey solutions, is proud to introduce cable and harness assembly services...

LISTED UNDER: Cable Assemblies | Wire and Cable

Welding Spark Resistant PUR Cable

April 24, 2014 8:12 am | by MDT Staff | Product Releases | Comments

Binder-USA is pleased to announce the addition of spark resistant PUR cables to the M12 cordset line up. The robust PUR cable ensures a resistance to sparks, wear, impact and flexibility. The new M12 A-coded cordsets are ideally suited for robot...

LISTED UNDER: Cable Assemblies | Connectors

High Flex, High Temperature Coaxial Cables

April 8, 2014 1:35 pm | by MDT Staff | Product Releases | Comments

Cicoil, the international leader in High Tech Flat Cables and Assemblies, is pleased to announce the introduction of its Ultra Flexible & High Temperature Coaxial Cables.  Unlike industry standard Semi-Rigid Coax products... 

LISTED UNDER: Cable Assemblies | Connectors | Wire and Cable

50 GHz Low-Loss RF Cable Assemblies

March 28, 2014 8:40 am | by MDT Staff | Product Releases | Comments

Crystek has extended the frequency range of its high performance RF coaxial cable assemblies to 50 GHz. The new 50 GHz low-loss RF cable assemblies feature corrosion-resistant...

LISTED UNDER: Cable Assemblies

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading