Advertisement
EMI/RFI Filters

Electrical/Electronic Components

July 25, 2013 12:33 pm | Schurter, Inc. | Products

Medically related products from SCHURTER meet international electro-technical standards and beyond that offer selected properties specially tuned to medical technology such as: plug-retention safety, easy-to-clean designs without edges, long service life, reliability, safety, tight seals, hygiene, simple operation and a high level of functionality. These products can be used in most equipment without additional testing.

LISTED UNDER: Connectors | Cordsets/Power Cords | EMI/RFI Filters

Quick Delivery on EMI Filters That Eliminate RF Interference

May 11, 2011 6:18 am | Lcr Electronics | Product Releases | Comments

LCR Electronics, a leading manufacturer of EMI filters, backplanes, rugged system enclosures and electronic control products, now offers two new series of EMI Filters for MRI...

LISTED UNDER: EMI/RFI Filters | Wire and Cable

EMI Filters Have Optional Surge Suppression

December 1, 2010 6:19 am | Foster Transformer Company | Product Releases | Comments

Foster Transformer now offers three models of EMI Filters with optional surge suppression that can be mounted with 1/4 in. quick connect terminals.

LISTED UNDER: EMI/RFI Filters
Advertisement

EMI Filter Plates Available With 1,500 VDC Flash Protection

October 20, 2010 7:07 am | Product Releases | Comments

Spectrum Advanced Specialty Products has developed the capability to add 1,500 VDC Flash protection to its complete line of EMI Filter plates, ideal for any application where higher voltage surge protection is required.

LISTED UNDER: EMI/RFI Filters

Miniature Solder-in EMI Filters Improve Insertion Loss

August 18, 2010 8:22 am | Product Releases | Comments

Spectrum Advanced Specialty Products offers a new L circuit EMI filter designed to provide both inductance and series resistance for superior transient performance.

LISTED UNDER: EMI/RFI Filters

Small AC Power Entry Module Has EMI Filter

June 14, 2010 6:43 am | Schurter, Inc. | Product Releases | Comments

The integrated EMI filter mounted at the point of power entry ensures optimal electromagnetic performance, while providing space savings and cost efficient assembly.

LISTED UNDER: EMI/RFI Filters

EMI Filter Plate Features Potting and Pin Protector

January 14, 2009 9:25 am | Product Releases | Comments

This EMI filter plate comes with special epoxy potting and a rubber pin protector for applications where rough handling or challenging environmental conditions are typical.

LISTED UNDER: EMI/RFI Filters

EMC Filters Deliver Outstanding Attenuation for Long Motor Leads

October 1, 2008 7:50 am | Epcos, Inc. | Product Releases | Comments

Cable-based measurements of commercial frequency converters showed that the EN 55011 limits were observed for class A up to 300 m and class B up to 200 m as well as for class C2 up to 300 m and class C1 up to 200 m as specified by EN 61800-3.

LISTED UNDER: EMI/RFI Filters
Advertisement

Inlet Filter Series Provides up to 6 dB More Attenuation

May 8, 2008 8:43 am | Schaffner Emc, Inc. | Product Releases | Comments

The FN9233E features an earth line choke with approximately 6 dB more attenuation compared to the FN9222 family, making the series ideal for applications requiring greater attenuation performance or additional attenuation on the ground wire.

LISTED UNDER: EMI/RFI Filters | Power Supplies

FMEB and FMEC Filters Are Optimized for DC Applications

May 8, 2008 8:43 am | Schurter, Inc. | Product Releases | Comments

FMEB and FMEC filters are especially optimized for use in DC applications, particularly those requiring increased attenuation of asymmetric disturbances. When used in the electrical supply cabinets, the filters guarantee safe operation of the system by attenuating external disturbances.

LISTED UNDER: EMI/RFI Filters | Metal Filter

EMI/RFI Filters

January 10, 2008 6:55 am | Epcos, Inc. | Product Releases | Comments

This standard range of EMC filters is specially designed and optimized for inverter applications, such as servos and motor drives. The R105 series filters are compact, lightweight, and offer significant attenuation of the most critical frequencies for inverter applications.

LISTED UNDER: EMI/RFI Filters

Power Filters (4043)

April 12, 2007 11:59 am | Sola/Hevi-Duty | Product Releases | Comments

The STF Series of Active Tracking Filters are designed to safeguard medical equipment against damaging low-energy voltage transients and high-frequency noise. The filters continuously track the input AC power line at all locations on the sinewave and instantaneously counter noise.

LISTED UNDER: EMI/RFI Filters

Power Filters

April 10, 2007 8:08 am | Sola/Hevi-Duty | Product Releases | Comments

The STF Series of Active Tracking Filters are designed to safeguard medical equipment against damaging low-energy voltage transients and high-frequency noise. The filters continuously track the input AC power line at all locations on the sinewave and instantaneously counter noise.

LISTED UNDER: EMI/RFI Filters

EMC Filters

January 18, 2007 11:37 am | Schaffner Emc, Inc. | Product Releases | Comments

These EMC filters are offered with modern plastic housings. Because of their design, the low-leakage, three-phase EMC filters are compact, lightweight, and offer a high level of functionality. Their design is also user-friendly and reduces installation time.

LISTED UNDER: EMI/RFI Filters | Metal Filter

MDT EXCLUSIVE: Noise Filters

December 4, 2006 4:39 am | Cosel Usa Inc. | Product Releases | Comments

The NAM series is a diversified line of noise filters. With 6 current options (4, 6, 10, 16, 20,

LISTED UNDER: EMI/RFI Filters

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading