Advertisement
EMI/RFI Shielding

Interference on the Call

August 7, 2013 5:51 pm | by MDT Staff | Leader Tech Inc. | Product Releases | Comments

While the headline of this article may seem unusual to some, it’s a common problem we all deal with. On a daily basis, there are millions of electronic devices that operate in close proximity on a very narrow portion of the wireless communications spectrum that spans from 30Hz to 300GHz.

LISTED UNDER: EMI/RFI Shielding

Cost-Effective CBS Shields for Mission Critical Environments

February 27, 2013 10:25 am | by MDT Staff | Leader Tech Inc. | Product Releases | Comments

Leader Tech’s extensive line of CBS shields deliver on performance, flexibility and value. The two-piece shield construction includes a solderable fence and removable cover, allowing for easy installation, rework and repair.

LISTED UNDER: EMI/RFI Shielding

EMI/RFI Shielding Gaskets

January 23, 2013 10:41 am | Interstate Specialty Products, Inc. | Product Releases | Comments

Custom manufactured EMI/RFI gaskets and seals, die-cut from solid, sponge, and fabric reinforced shielding materials, for a wide range of applications are being introduced by Interstate Specialty Products, Inc.

LISTED UNDER: EMI/RFI Shielding | Gaskets and Seals | Silicone
Advertisement

Photo-Etched EMI/RFI Shielding Components

December 7, 2012 9:41 am | Stork Veco B.V. | Product Releases | Comments

Custom manufactured metallic EMI/RFI shielding components for integration into printed circuit boards and other electronic devices are being introduced by Stork-Veco International.

LISTED UNDER: EMI/RFI Shielding

Gasket Design for EMI Shielded Honeycomb Vents Improves Performance/Delivery

October 5, 2009 6:19 am | Product Releases | Comments

This continuous integrated gasket for shielding honeycomb vents offers better performance, reduced cost, and the fastest production time. Continuous lengths of the high-performance BeCu gaskets are mechanically installed under the inner perimeter of the vent's aluminum extrusion frame.

LISTED UNDER: EMI/RFI Shielding

Iris Spring for EMI Shielding

February 14, 2008 6:43 am | Binder Usa | Product Releases | Comments

L Iris spring shielding technology is offered in many of the company’s industrial network and sensor connectors. This new addition is an effective and simple way to protect equipment from EMI (electromagnetic interference).

LISTED UNDER: EMI/RFI Shielding

Low-Dose Grids

December 10, 2007 9:52 am | Dunlee | Product Releases | Comments

Smit Röntgen, a leading manufacturer of fiber-interspaced grids, offers low-dose grids for DR and CR applications. The company’s full line of grid products are offered through Dunlee.

LISTED UNDER: EMI/RFI Shielding

EMI/RFI Shielding Gaskets

August 31, 2005 11:15 am | Product Releases | Comments

Three EMI/RFI shielding, beryllium copper, alternate slot gaskets are offered. Extending across the contact radius of these symmetrical profile gaskets, slots alternate from one side to the other. This design enhances the strength of the gasket while maintaining its flexibility.

LISTED UNDER: EMI/RFI Shielding
Advertisement

EMI/RFI Shield Clips

August 31, 2005 11:15 am | Autosplice, Inc. | Product Releases | Comments

SMiT Shield Clips eliminate the hassles and inefficiencies of secondary hand soldering operations for mounting EMI/RFI shields while accommodating virtually any product design.

LISTED UNDER: EMI/RFI Shielding | Product Design

EMI/RFI Shielding Catalog

January 6, 2005 9:30 am | Product Releases | Comments

New 52-page catalog offering Tech-Etch’s complete standard and custom EMI/RFI shielding product line includes all sizes, shapes, compositions, mounting options, and seal types.

LISTED UNDER: EMI/RFI Shielding

Shielding Gaskets

March 4, 2004 5:50 am | Vanguard Products Corp. | Product Releases | Comments

This series of low compression-set silicone sponge core D-connector shields is available for grounding and RFI Shielding. The highly conductive outer layer is co-extruded and provides very low contact resistance over a resilient inner sponge core.

LISTED UNDER: EMI/RFI Shielding

EMI Shields

December 4, 2003 7:07 am | Chomerics | Product Releases | Comments

Spring-Line&#153 stainless steel ATX shields are designed to provide shielding against EMI leakage through the multiple back panel I/O connector ports typical of ATX form factor motherboards. They install easily via integral clips into chassis configured to ATX specifications.

LISTED UNDER: EMI/RFI Shielding
X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading