Advertisement

Universal Leads

November 15, 2012 5:04 pm | Bioconnect | Products

Due to repeated handling, patient monitoring leadwires wear out much faster than the cable they are attached to. This necessitates the consumption of large quantities of leads for a wide variety of equipment. Bioconnect’s replacement leads feature DIN overmolded DIN sockets that have a positive fit with any brand of AAMI approved cables. However, Bioconnect’s AAMI cable series is designed and manufactured specifically to maximize retention with their brand of leads.

LISTED UNDER: Wiring and Accessories

Twin Pin Cable Assemblies

November 15, 2012 4:59 pm | Bioconnect | Products

Twin-pin connectors are used in the conductive circuit from the patient to an ECG device. The shielded leads protect the weak ECG electrical waveforms from the effects of extraneous RF energy. Twin-pin connectors are popularly used in the ECG industry and are now offered by Bioconnect. Because of its many desirable qualities, Bioconnect uses Santoprene® as a primary molding material and outer insulation material in all of their standard ECG products, including twin-pin leads. Bioconnect has provided high quality, American made patient medical cables since 1989.

LISTED UNDER: Wiring and Accessories

Custom Tooled Wire Fabrication Capabilities

August 27, 2012 10:13 am | Product Releases | Comments

Northern Wire LLC introduces new corporate literature detailing its custom tooled wire fabrication capabilities. Straighten and cut, automated forming, welding and press departments, and cold heading operations combine with secondary capabilities...

LISTED UNDER: Wire Forming | Wire and Cable | Wiring and Accessories
Advertisement

Cable Design for Micro-wire Harnesses in Miniature Electronics

August 16, 2012 10:58 am | Omnetics Connector Corp. | Product Releases | Comments

Electrical design teams are constantly demanding higher density to increase the functions of each part of their instruments. Space available for the internal wiring systems that route signals from one section of the instrument to another is getting smaller and more critical.

LISTED UNDER: Wire and Cable | Wiring and Accessories | Wire and Cable

Electrical Terminals

May 31, 2005 6:33 am | Product Releases | Comments

These electrical terminals include over 1,500 products such as rings, spades, insulated and non-insulated disconnects, pins, receptacles, splices, and a wide range of power and extension cord blades and pins.

LISTED UNDER: Wiring and Accessories

Spring Contacts

December 6, 2004 7:30 am | Product Releases | Comments

Four contacts (#24, #26, #27, and #38), made from Beryllium Nickel Alloy 360, is recommended for "down-hole" and "burn-in" applications. BeNi is suitable for continuous use up to 250&#176C, and periodic use up to 370&#176C, without significant loss of its spring properties.

LISTED UNDER: Wiring and Accessories

Wire Stripper (1437)

November 2, 2004 6:07 am | Product Releases | Comments

The E300 heavy duty wire stripper is ideal for demanding applications and production line stripping of large magnet, enamel, and film insulated wires.

LISTED UNDER: Wiring and Accessories

Wire Stripper (1133)

September 3, 2004 5:50 am | Product Releases | Comments

The L2S Bench Wire Stripper removes film insulations from round wires between 8-29 AWG (3.25-0.28 mmo) including enamel, Formvar, ML, armored poly-thermaleze and epoxy. A high-speed rotating insert quickly strips insulation from the surface of the wire.

LISTED UNDER: Wiring and Accessories
Advertisement

Wrap

June 8, 2004 9:52 am | Product Releases | Comments

Spiral Wrap is a very economical solution for many types of routing and bundling applications in industrial and commercial environments. It can be used on virtually any item with a diameter of 1/16 in. to 7 in. Spiral Wrap is available spooled or bagged in lengths from 25 feet up to 2,500 feet.

LISTED UNDER: Wiring and Accessories

Clamps

April 1, 2004 11:39 am | Product Releases | Comments

The TLFB series clamps are ideal for routing wires and cables. The unique adhesive lined flexible base allows these clamps to be mounted on contoured surfaces. This allows cables to be routed in areas in which they were previously unable to without the use of screws.

LISTED UNDER: Wiring and Accessories | Wire and Cable

Wire Strippers (551)

April 1, 2004 11:39 am | Product Releases | Comments

Each tool in the DCF Portable Magnet and Enamel Wire Strippers series can strip a wide range of wire sizes from 9 - 35 AWG with strip length from 3/32 in. - 2 1/2 in. (2.38 - 63.5 mm).

LISTED UNDER: Wiring and Accessories

Flexible Energy Chain

March 4, 2004 5:50 am | Product Releases | Comments

Triflex R is designed for robotic applications requiring three-dimensional (3-D) and multi-axis freedom of movement. Smooth contours and a tubular design ensure fluid mobility.

LISTED UNDER: Wiring and Accessories

Wire Strippers

March 4, 2004 5:50 am | Product Releases | Comments

The DCF Series Portable Magnet and Enamel Wire Strippers can strip a wide range of wire sizes from 9 to 35 AWG with strip length from 3/32 in to 2 1/2 in. A lightweight hand-piece is driven by a variable speed power unit, which centrifugally controls three carbide stripping blades.

LISTED UNDER: Wiring and Accessories

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading