Advertisement
Batteries

Battery System

April 10, 2014 8:21 am | by MDT Staff | Product Releases | Comments

Anton/Bauer, a Vitec Group brand and premier provider of mobile power systems for the healthcare industry, will demonstrate its new Elora Battery System at AONE 2014. The innovative system is designed to dramatically transform battery management...

LISTED UNDER: Batteries | Battery Charger | Power Supplies

New Standard Smart Battery Packs

February 24, 2014 5:23 pm | by MDT Staff | RRC Power Solutions, Inc. | Product Releases | Comments

RRC has expanded its product portfolio with three new high energy standard Li-Ion SMBus battery packs. The RRC2040-2 is a 3S2P pack with 11.25V, 6400mAh and 72Wh. Two additional batteries are the RRC2054 and RRC2057, which share the same housing dimensions, but have different ratings...

LISTED UNDER: Batteries

Expanded Line of Rechargeable Lithium Polymer Batteries

February 19, 2014 11:57 am | by MDT Staff | Product Releases | Comments

Providing design engineers with new options for compact and higher power capacity rechargeable power sources for portable medical, industrial and consumer electronic devices, the Renata Batteries division of the Swatch Group recently added three new types to its family of lithium polymer batteries...

LISTED UNDER: Batteries
Advertisement

Ultra-Low Profile Surface Mount Coin Cell Holders

January 27, 2014 3:34 pm | by MDT Staff | Keystone Electronics Corp. | Product Releases | Comments

When circuit board height is a critical design parameter, Keystone offers a solution with an ultra-low profile holder for the #2032 Lithium Coin Cells. These new holders rise only 2mm above the PCB surface and are ideal for retaining cells securely under shock and vibration in high-density applications for PCB requirements.

LISTED UNDER: Electrical Contacts | Batteries

Rechargeable Li-ion cells and batteries

October 8, 2013 11:18 am | Saft | Products

Saft’s lithium-ion cells are a light-weight, long-lasting, and flexible solution for compact medical equipment. They have demonstrated 1,000 or more cycles (depending on conditions), and can be charged and discharged over a wide temperature range, especially at low temperatures.

LISTED UNDER: Batteries | Power Supplies

Lithium Thionyl Chloride (Li-SOCl2) cells and batteries

October 8, 2013 11:15 am | Saft | Products

Saft’s lithium thionyl chloride (Li-SOCl2) batteries have demonstrated long life in applications requiring operation of 5 to 20 years or more. With proven performance over extended operating life, you can depend on reliable operation of your medical device.

LISTED UNDER: Batteries | Power Supplies

12V Super-Phosphate battery

October 8, 2013 11:09 am | Saft | Products

High energy lithium iron phosphate battery based on VL 43E Fe Super-Phosphate® cells, ideally suited for applications requiring exceptionally long life and reliable performance.

LISTED UNDER: Batteries | Power Supplies

Cymbet EnerChip Rechargeable Bare Die Batteries

August 21, 2013 4:34 pm | Cymbet Corporation | Products

Cymbet EnerChip™ thin film rechargeable solid-state smart batteries (SSB) are an innovation in energy storage and power management. Packaged as a Surface Mount Technology (SMT) component, the EnerChip provides energy storage in a form factor and with a convenience not previously attainable using conventional solutions such as lithium coin cells or super capacitors. Cymbet's EnerChip SSBs are well suited for applications where battery backup power is needed to maintain the settings of microcontroller memories, real-time-clocks and SRAM during power loss or power failures.

LISTED UNDER: Integrated Circuits | Batteries | Battery Charger
Advertisement

Cymbet EnerChip Rechargeable Solid State Batteries

August 21, 2013 4:28 pm | Cymbet Corporation | Products

Cymbet EnerChip™ thin film rechargeable solid-state smart batteries (SSB) are an innovation in energy storage and power management. Packaged as a Surface Mount Technology (SMT) component, the EnerChip provides energy storage in a form factor and with a convenience not previously attainable using conventional solutions such as lithium coin cells or super capacitors. Cymbet's EnerChip SSBs are well suited for applications where battery backup power is needed to maintain the settings of microcontroller memories, real-time-clocks and SRAM during power loss or power failures.

LISTED UNDER: Integrated Circuits | Batteries | Battery Charger

Rechargeable Lithium-Ion Cells for Remote Wireless Applications

November 12, 2012 10:59 am | Product Releases | Comments

Tadiran Batteries, a leading manufacturer of lithium batteries, has just introduced the TLI Series of batteries, a new family of long-life rechargeable lithium-ion cells designed specifically for use in harsh environments.

LISTED UNDER: Batteries | Power Supplies

Portable PowerPack Provides Clean, Cordless AC Power

October 26, 2012 9:57 am | Product Releases | Comments

The PowerPack Series Portable Power System from Newcastle Systems provides seamless, cordless AC power for 12 hours or more between rechargings from a standard wall outlet.

LISTED UNDER: Batteries | Power Supplies

Coin Cell Holders

August 15, 2012 10:18 am | Product Releases | Comments

Harwin, manufacturer of hi-rel interconnect solutions and cost-saving PCB hardware products, has expanded its EZ-BoardWare range of PCB hardware products with four new coin cell holders. As with all the EZ-BoardWare products...

LISTED UNDER: Batteries

Tadiran Rapid Response Batteries Activate Instantly Delivers Improved Performance

July 24, 2012 2:07 pm | Product Releases | Comments

Tadiran Batteries, a leading manufacturer of lithium batteries, has just developed the Tadiran Rapid Response TRR© Series, a new family of lithium thionyl chloride batteries capable of delivering high capacity and high energy density without voltage or power delay, delivering up to 15% longer operating life in certain applications.

LISTED UNDER: Batteries

Industrial supplies for battery-backed applications

July 10, 2012 9:46 am | XP Power | Product Releases | Comments

XP Power today announced the BCS series of industrial supplies aimed at a broad range of applications that use battery backup to maintain equipment operation during a mains failure.

LISTED UNDER: Batteries | Power Supplies | Batteries

Lithium Battery Holders

June 15, 2012 9:41 am | Keystone Electronics Corp. | Product Releases | Comments

A broad, new selection of polarized SMT and THM CR2 and CR123A Lithium Battery Holders has joined the Keystone Electronics roster of premium battery holders.

LISTED UNDER: Stamping | Batteries

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading