Power Isolation/Distribution Units
Preparing for Medical Electronics RoHS Compliance
May 20, 2013 2:33 pm | by George Karalias, Director of Marketing & Communications, Rochester Electronics | Rochester Electronics | Blogs | CommentsNext July, certain medical electronics will fall under the scope of RoHS—the European Union’s Restriction on Hazardous Substances. In terms of the electronics industry, that is now a tight deadline for manufacturers. Medical devices that have so far been exempt from RoHS fall into scope under the RoHS Recast (RoHS 2) beginning in July 2014.
LISTED UNDER: Amplifiers | Flexible Circuits | Hybrid Circuits RoHS Deadline Approaches for Medical Electronics
April 25, 2013 4:41 pm | by George Karalias, Director of Marketing & Communications, Rochester Electronics | Rochester Electronics | Blogs | CommentsEngineers and buyers in the medical device manufacturing industry should note the following date: July 22, 2014. That is the day medical electronics must comply with the EU’s Restriction on Hazardous Substances (RoHS) regulation. Medical devices have so far been exempt from RoHS, which requires the elimination of lead, cadmium, mercury, and other substances from electronics.
LISTED UNDER: Amplifiers | Flexible Circuits | Hybrid Circuits
USB Travel Power Station
August 20, 2012 11:54 am | Quail Electronics, Inc. | Product Releases | CommentsStop wasting time and space carrying multiple charging adapters and looking for a place to plug them in! Quail's unique USB Travel Power Station and USB Power Plate do the hard work for you, whether on the road or in the convenience of your home.
LISTED UNDER: Power Isolation/Distribution Units
58% Lower Profile Schottky Rectifier
August 16, 2012 10:13 am | Central Semiconductor Corp. | Product Releases | CommentsCentral Semiconductor introduces the CMSH3-40FL, 3.0 amp, 40 volt Schottky rectifier packaged in the low profile SMBFL case. In comparison with the standard SMB package, the SMBFL provides a 58% lower profile...
LISTED UNDER: Power Isolation/Distribution Units
19 Inch Rack-Mount Power Distribution Unit
June 10, 2011 7:12 am | Interpower Corporation | Product Releases | CommentsInterpower Corporation announces a 19” rack-mount power distribution unit with an unterminated 2.5mm² harmonized power cord. This power distribution unit, part number 852Q2K19 has 8 Sheet F and 3 Sheet J outlets.
LISTED UNDER: Power Isolation/Distribution Units | Cordsets/Power CordsMedical Desktop Switcher
December 10, 2007 9:56 am | Product Releases | CommentsResponding to the demand for higher power portable medical devices, the PMP150 Series of medically approved desktop AC/DC power supplies is offered. These units provide 150 Watts of power in an ultra-compact 3.0 inches× 8.17 inches× 1.72 inches package.
LISTED UNDER: Power Isolation/Distribution Units
Power Entry Module (2989)
April 18, 2006 6:57 am | Schurter, Inc. | Product Releases | CommentsRefined for optimal performance at the lowest price, the Series 5120 filtered power entry module is particularly suited for single-phase power supplies used in Medical Devices, which are governed by stringent EMC emission and immunity standards.
LISTED UNDER: Power Isolation/Distribution Units
Distribution Block
February 6, 2006 10:29 am | GlobTek, Inc. | Product Releases | CommentsThe 1KPP-3KPP and 1KPP-4KPP low voltage distribution boxes allow the distribution of DC power from an off-the-shelf power supply using the industry standard three- or four-pin locking plug to three equivalent three- or four-pin locking jacks.
LISTED UNDER: Power Isolation/Distribution Units | Power Supplies
Accessory Power Module
February 6, 2006 10:29 am | Interpower Corporation | Product Releases | CommentsThe filtered Sheet F outlet accessory power modules are intended for medical equipment applications where the combination of filtering and AC power entry for detachable Sheet E power cords or cordsets in one component is advantageous.
LISTED UNDER: Power Isolation/Distribution Units | Cordsets/Power Cords | Cordsets/Power Cords
