Advertisement

X-Ray Sub-Systems Provide up to 450kV and 6kW

December 10, 2013 3:17 pm | by MDT Staff | Product Releases | Comments

Spellman High Voltage Electronics introduced X-Ray sub-systems, featuring its industry leading XRV high voltage generators, available in unipolar and bipolar, 160 to 450kV, 1.8-6kW. By combining  the robust XRV generator with industry leading Metal Ceramic X-Ray tubes, tube coolers/chillers and HV cables, Spellman provides a flexible, cost effective solution for many applications.

LISTED UNDER: Power Supplies

DC/DC Power Modules Deliver Over 95-percent Peak Efficiency

December 2, 2013 11:13 am | by MDT Staff | Product Releases | Comments

Texas Instruments (TI) introduced three power management modules to its SIMPLE SWITCHER family, including the 10-A LMZ31710, which provides the industry’s highest power efficiency in the smallest package, up to 50-percent smaller than similar solutions.

LISTED UNDER: Power Supplies

30KW High Density DC-DC and AC-DC Power Supply

November 19, 2013 2:38 pm | by MDT Staff | Product Releases | Comments

Schaefer announced the C/B 6600 Series of 30kWatt DC-DC and AC-DC converter modules and battery charger. This highly-reliable, compact and rugged design provides a high density solution for high-power applications in industries such utility, oil/gas, automation, heavy industrial, military, telecom/datacom, alternative energy, transit/railway, process control, and power stations.

LISTED UNDER: Power Supplies
Advertisement

MINT1150 AC/DC Power Supply

November 15, 2013 12:34 pm | SL Power Electronics, Corp. | Products

SL Power’s medically approved high-efficiency MINT1150 AC/DC power is approved to the highest safety standards, including EN/IEC/UL60601-1, 3rd edition. The high-density open frame MINT1150 family is ideal for medical devices, home healthcare systems and laboratory equipment needing a highly reliable and energy efficient power solution in a small form factor at an affordable cost. The MINT1150 provides 150W of output power with up to 90 percent efficiency at 240Vac. Certified to comply with the isolation requirements for Means of Patient Protection (2 x MOPP), the MINT1150 is suitable for use in both patient vicinity and patient contact applications where equipment is used near or comes in direct contact with the patient.

LISTED UNDER: Power Supplies

Compact Power Supplies Exhibit 400W of Output Power

November 12, 2013 2:13 pm | by MDT Staff | Product Releases | Comments

The MPU-400S series from MicroPower Direct provides 400W of output power in a very compact package.

LISTED UNDER: Power Supplies

Ordering High Quality Hospital Grade Medical Power Cords Made Easy

October 29, 2013 5:23 pm | by MDT Staff | Product Releases | Comments

Peerless Electronics’ online store features the twelve most common hospital grade medical power cords for medical and dental electronic equipment. These cords are precision manufactured by MEGA Electronics. MEGA’s North American power cord range conforms to NEMA standards.

LISTED UNDER: Power Supplies

Ultra-small P-channel Enhancement-Mode Power MOSFETs

October 15, 2013 2:56 pm | by MDT Staff | Product Releases | Comments

Advanced Power Electronics has launched a new P-channel Enhancement-mode Power MOSFET, the AP2325GEU6-HF-3, which is well-suited for use in applications such as load switches.

LISTED UNDER: Power Supplies

Rechargeable Li-ion cells and batteries

October 8, 2013 11:18 am | Saft | Products

Saft’s lithium-ion cells are a light-weight, long-lasting, and flexible solution for compact medical equipment. They have demonstrated 1,000 or more cycles (depending on conditions), and can be charged and discharged over a wide temperature range, especially at low temperatures.

LISTED UNDER: Batteries | Power Supplies
Advertisement

Lithium Thionyl Chloride (Li-SOCl2) cells and batteries

October 8, 2013 11:15 am | Saft | Products

Saft’s lithium thionyl chloride (Li-SOCl2) batteries have demonstrated long life in applications requiring operation of 5 to 20 years or more. With proven performance over extended operating life, you can depend on reliable operation of your medical device.

LISTED UNDER: Batteries | Power Supplies

12V Super-Phosphate battery

October 8, 2013 11:09 am | Saft | Products

High energy lithium iron phosphate battery based on VL 43E Fe Super-Phosphate® cells, ideally suited for applications requiring exceptionally long life and reliable performance.

LISTED UNDER: Batteries | Power Supplies

Multi Format 180 Watt 93% Efficient Power Supply

October 3, 2013 2:03 pm | by MDT Staff | XP Power | Product Releases | Comments

XP Power announced additions to its GCS series of single output high efficiency “green” AC-DC power supplies with both ITE and Medical safety approvals. Complementing the GCS150 150 Watt models, the GCS180 range extends the power output capability up to 180 Watts.

LISTED UNDER: Power Supplies

85W Class II Medical Grade Power Supplies

October 1, 2013 4:20 pm | by MDT Staff | Protek Power | Product Releases | Comments

The PMP85SF Series of desktop AC-DC power supplies from Protek Power deliver 85W of power and are certified to UL/ES60601-1 and EN60101-1 3rd edition medical safety standards. The PMP85SF Series are Class II medical grade units that accept a 90-264VAC universal input and are equipped with a C8 AC input receptacle to partner with an interchangeable cord for worldwide use.

LISTED UNDER: Power Supplies

Compact, Low-Voltage Power Supplies Suit Many Applications

September 25, 2013 11:09 am | by MDT Staff | Product Releases | Comments

TDK Corporation has announced the extension of the TDK-Lambda GWS500 series power supplies with the addition of two low output voltage models. Combining the same high efficiency, high power density and low standby power characteristics as other models within the GWS500 series, the 5V 80A and 7.5V 67A models are well-suited for fitting into 1U enclosures.

LISTED UNDER: Power Supplies

External Power Supply Lines Available in 30-Watt or 50-Watt Configurations

September 24, 2013 3:57 pm | by MDT Staff | ICCNEXERGY | Product Releases | Comments

ICCNexergy has announced the launch of its new 30-watt and 50-watt desktop power supply lines for both medical (MWA030, MWA050) and ITE/commercial (FWE030, FWE050) applications. These new power supply lines meet Level V efficiency standards and are available in both class I and class II designs.

LISTED UNDER: Power Supplies

Portable Power Track System

September 17, 2013 3:32 pm | by MDT Staff | Product Releases | Comments

Bring additional power from the wall direct to your work station. The PTRC3 from Mockett has an ultra-thin profile, lying nearly flat on the surface, eliminating any tripping hazards. It is also safe for casters, carts and wheelchairs to smoothly pass over.

LISTED UNDER: Power Supplies

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading