Advertisement

Emphasis on Miniaturization:Miniaturization Driving Medical Device Innovation

March 7, 2006 9:37 am | Product Releases | Comments

Cutting edge electronics are affording tremendous strides in the effectiveness of today's advanced medical devices. The ability to reduce the size of these sophisticated components is a significant factor behind this success.

LISTED UNDER: Power Supplies

Bipolar Chopper Drive

February 9, 2006 8:45 am | Product Releases | Comments

The DCS4020 bipolar chopper drive has been designed for easy set up and use. It is ideal for development projects&#151just connect a single power supply and a motor and the drive is ready to run. Motor current is set using an on-board potentiometer.

LISTED UNDER: Drives | Power Supplies

Emphasis on Laser Equipment: Advances in Laser Welding Systems

February 7, 2006 5:39 am | Miyachi Unitek Corp. | Product Releases | Comments

Requiring exceptional precision in their welding processes, medical device manufacturers are looking to laser technology experts to provide a system that enables such a high degree of accuracy.

LISTED UNDER: Welders | Laser Welding | Power Supplies
Advertisement

Distribution Block

February 6, 2006 10:29 am | GlobTek, Inc. | Product Releases | Comments

The 1KPP-3KPP and 1KPP-4KPP low voltage distribution boxes allow the distribution of DC power from an off-the-shelf power supply using the industry standard three- or four-pin locking plug to three equivalent three- or four-pin locking jacks.

LISTED UNDER: Power Isolation/Distribution Units | Power Supplies

Power Supplies (2629)

February 6, 2006 10:29 am | Product Releases | Comments

The manufacturer of medical power supplies is converting all the models in its linear power supply line in order to bring the units into full compliance with the RoHS directive.

LISTED UNDER: Power Supplies | Power Supplies

Power Supplies (2605)

January 6, 2006 11:06 am | Product Releases | Comments

The APS400MX series of 400 watt switching power supplies offer single and dual outputs ranging from 2.0 to 58 VDC with a broad range of standard options to meet customer specific requirements. These power supplies come in a standard u-frame package that measures only 5.0 x 8.0 x 1.6 in.

LISTED UNDER: Power Supplies

Digital DC Converter

November 2, 2005 6:38 am | Product Releases | Comments

The DTX digital DC converter will enable designers to prepare and evaluate products for use with the new digital architecture and open-source PMBus communication protocol as well as the industry-standard I2C bus.

LISTED UNDER: Power Supplies

Ultrasonic Press System

September 30, 2005 11:43 am | Dukane Corporation | Product Releases | Comments

This ultrasonic precision press system features a 30/40 actuator mounted on an ultra-rigid support package. The 30/40’s square-welded, steel H-frame style column sets it apart from other systems. The column eliminates deflection so that the machine is repeatable and precise.

LISTED UNDER: Presses | Power Supplies
Advertisement

Custom Power Supplies

August 15, 2005 8:36 am | Product Releases | Comments

The Xgen Series “powerKit” offers convenience, allowing system designers immediate development of custom AC/DC power supply solutions.

LISTED UNDER: Power Supplies | Power Supplies

Power Supplies (2175)

August 11, 2005 8:20 am | Product Releases | Comments

These 40 watt triple output power supplies are designed for medical applications. All three models in the series deliver a total of 40 watts of DC power in an open frame configuration, with all medical agency and regulatory approvals completed, including UL2601-1, CE, FCC, and CISPR.

LISTED UNDER: Power Supplies

Power Supply (2103)

June 30, 2005 7:23 am | Product Releases | Comments

This 30 watt medical AC-DC universal input power supply is designed for small and compact space requirements. The GNT30 Series allows design engineers to realize the benefits of the compact footprint (50 x 80 mm) with less design impact.

LISTED UNDER: Power Supplies | Power Supplies

Diode Lasers

May 3, 2005 8:23 am | Product Releases | Comments

Now available at 940 nm and 980 nm, these fiber array package (FAP) diode lasers produce 40W of CW power through an 800-&#181m fiber bundle, with a numerical aperture of &lt0.11.

LISTED UNDER: Power Supplies

Power Supplies (2015)

May 3, 2005 8:23 am | GlobTek, Inc. | Product Releases | Comments

This external power supply is approved to international safety agency requirements. Available designs include wall plug-in and desktop configurations with output wattage available up to 150W. The power supplies are ideal for portable devices and medical equipment.

LISTED UNDER: Power Supplies | Power Supplies

Power Supply (1497)

December 6, 2004 7:20 am | Product Releases | Comments

The MW136 external power series features a 100-250 VAC universal input and is available in both desktop and wall-mount styles. All models are single output ranging from 23 watts to 60 watts of power. There are eight models in the family ranging from 3.3 volts to 24 volts.

LISTED UNDER: Power Supplies | Power Supplies

OEM Lasers

November 2, 2004 6:07 am | Product Releases | Comments

These low-power CO 2 lasers feature excellent beam quality and a very small footprint. Called the Diamond C-55 and Diamond C-70, these OEM lasers provide more than 55W and 70W of output power, respectively, at 10.55- to 10.63-&#181m. Their M 2 &lt1.2 (<1.

LISTED UNDER: Laser Marking | Power Supplies

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading