Advertisement

Quarter Brick DC-DC Converters with 200-425VDC Input

February 5, 2014 5:12 pm | by MDT Staff | Tdk - Lambda Americas | Product Releases | Comments

TDK Corporation announced the introduction of the TDK-Lambda PH-A280 series of DC-DC power modules with high voltage DC input. These quarter-brick modules operate from a wide range DC input of 200 to 425VDC, which is widely used in HVDC (High Voltage DC Current) and solar cell related applications.

LISTED UNDER: Transformers/Converters/Conditioners

Analog to Digital Converter for Precision Applications

February 3, 2014 3:00 pm | by MDT Staff | Product Releases | Comments

The DATEL Business Unit of Murata Power Solutions announced the introduction of the ADC-85 series of Analog-to-Digital converters, which are 12-bit, 8µs conversion time ADCs housed in a hermetically sealed 32-pin side-brazed DDIP or gull-wing SMT ceramic package...

LISTED UNDER: Transformers/Converters/Conditioners

High-performance, High-resolution, Ultra-low-power SAR ADCs

January 29, 2014 12:08 pm | by MDT Staff | Texas Instruments Inc. | Product Releases | Comments

Texas Instruments (TI) expanded its SAR (successive approximation register) analog-to-digital converter (ADC) product portfolio with a new family of 12 devices that provide the industry’s widest analog supply and common-mode voltage ranges.

LISTED UNDER: Transformers/Converters/Conditioners
Advertisement

Power Block Modules Address Demand for Increasing Power Densities

January 13, 2014 4:13 pm | by MDT Staff | Murata Power Solutions | Product Releases | Comments

Murata introduced the first in a series of Power Blocks designed to provide the power system architect with an alternative design approach for non- isolated DC-DC conversion. This concept, developed by Murata Power Solutions to meet the growing demand for increased power densities, sits between a discrete point-of-load (PoL) design and that of a complete non-isolated PoL converter module.

LISTED UNDER: Transformers/Converters/Conditioners

30 MHz VDSL2 Transformers for VDSL2 Vectoring

December 12, 2013 3:38 pm | by MDT Staff | Product Releases | Comments

Pulse Electronics introduced the BX4285LNL and BX4285LNLT VDSL vectoring transformers. These transformers can be used in both VDSL2 vectoring and non-vectoring configurations as Class H line drivers to deliver high bandwidth over existing copper transmission lines.

LISTED UNDER: Transformers/Converters/Conditioners

Low Cost, 1W SIP DC/DC Converters

December 2, 2013 10:54 am | by MDT Staff | Micropower Direct Llc | Product Releases | Comments

Available now from MicroPower Direct, the MD100xE series provides 1W of output power in a miniature 7-pin SIP package.

LISTED UNDER: Transformers/Converters/Conditioners

Miniature LVDTs Provide Precise Measurements at Higher Speeds

November 12, 2013 2:37 pm | by MDT Staff | Measurement Specialties, Inc. | Product Releases | Comments

Measurement Specialties offers a series of miniature, high-reliability LVDTs (linear variable differential transformers) that provide precise measurements at higher displacement speeds.

LISTED UNDER: Transformers/Converters/Conditioners

Integrated Voltage Regulator Delivers Over 97% Efficiency

November 11, 2013 2:57 pm | by MDT Staff | International Rectifier | Product Releases | Comments

International Rectifier, IR, announced the introduction of the IR3846 35A Point-of-Load (POL) integrated voltage regulator for space constrained enterprise power applications including servers, storage and netcom and telecom equipment that require high power density.

LISTED UNDER: Transformers/Converters/Conditioners
Advertisement

PFM DC/DC Converter Saves Space and Cost

November 5, 2013 2:57 pm | by MDT Staff | Product Releases | Comments

Advanced Power Electronics has announced the APE1910-HF-3, a Pulse Frequency Modulation (PFM) DC/DC converter with a low quiescent current of around 30µA and shutdown current less than 1uA. Available in a small RoHS/REACH-compliant halogen-free SOT-23-5 package, the APE1910-HF-3 features a wide input voltage range from 1.2V to 12V.

LISTED UNDER: Transformers/Converters/Conditioners

300mA LDO Regulators Have Low Quiescent Current

October 24, 2013 4:03 pm | by MDT Staff | Apec, A Division Of Helix Medical | Product Releases | Comments

Advanced Power Electronics has announced a new series of low drop-out linear regulators that include current and thermal shutdown protection features. APE8800A-HF-3 positive linear regulators have a very low quiescent current of about 30µA, an output voltage accuracy of ±2%, and can supply a guaranteed 300mA of output current with a drop-out voltage of only 250mV.

LISTED UNDER: Transformers/Converters/Conditioners

New Line of Regulated AC-DC Converters

October 16, 2013 3:50 pm | by MDT Staff | Product Releases | Comments

UltraVolt announced today the launch of its newest line of single output high-voltage modules – the ESP Series. The new line of “Electrostatic Precipitators” AC-DC high-voltage modules, the ESP Series, consists of a combined 14 models that provide outputs of 8kV/4kV or 12kV/16kV at 10, 20, 30, or 50 watts of output power.

LISTED UNDER: Transformers/Converters/Conditioners

1 W DC-DC Converter with 26% Footprint Reduction

October 16, 2013 12:07 pm | by MDT Staff | Murata Power Solutions | Product Releases | Comments

Murata announced the MEU1 series of ultra-miniature single isolated output 1 Watt DC-DC converters from Murata Power Solutions. Measuring just 8.30 x 6.10 x 7.55 mm, this new series achieves a 26% footprint reduction when compared to previously released products.

LISTED UNDER: Transformers/Converters/Conditioners

30 Watt, High Reliability DC-DC Converters

October 9, 2013 9:25 pm | by MDT Staff | Crane Aerospace & Electronics | Product Releases | Comments

Crane Aerospace & Electronics announced a series of enhancements to its popular MTR Series of 30 watt, high reliability dc-dc converters.

LISTED UNDER: Transformers/Converters/Conditioners

Hi-Voltage Magnetics at 2013 MD&M Show

October 3, 2013 1:56 pm | by MDT Staff | Product Releases | Comments

Design engineers attending the MD&M Show, Oct 29-30, Minneapolis, MN, with an interest in high voltage electronics will want to visit Booth 1710 to see the latest in magnetic component custom engineered power solutions from Datatronics, which has become a trusted supplier of life-saving electronics in the medical device industry.

LISTED UNDER: Transformers/Converters/Conditioners

New Medical Safety Standards for Medical Devices & Transformers

October 1, 2013 4:10 pm | by MDT Staff | Bridgeport Magnetics | Product Releases | Comments

As of June 1, 2013 all new medical devices in the USA must be certified to the third edition of IEC60601.1 or its equivalent ANSI (UL) standard. Bridgeport Magnetics is now certified in the third edition of the medical safety standard IEC60601.1 and its equivalent ANSI (UL), CSA and EN standard for its line of hospital grade isolation transformers.

LISTED UNDER: Transformers/Converters/Conditioners

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading