Fully Isolated DC-DC Converters

October 1, 2012 10:13 am | Murata Power Solutions | Product Releases | Comments

Murata Power Solutions RBE series of fully isolated DC-DC converters are designed for a broad range of applications including 12 VDC intermediate bus architectures or distributed power-based applications...

LISTED UNDER: Transformers/Converters/Conditioners

Isolated 1W DC-DC Converter Offers Tight Load Regulation and Improved Efficiency

September 18, 2012 10:18 am | Murata Power Solutions | Product Releases | Comments

Murata Power Solutions today announced the MEE1 series, a 1 Watt single output PCB mounted DC-DC converter designed for a broad range of industrial, automation and instrumentation...

LISTED UNDER: Transformers/Converters/Conditioners

High Power DC/DC Converter Modules

September 12, 2012 2:16 pm | Product Releases | Comments

Power Sources Unlimited, Inc. announces the New TEP Series of ultra-compact, high power DC/DC converter modules with 75 up to 240W output power. Packaged in a rugged, sealed metal case with aluminum baseplate...

LISTED UNDER: Transformers/Converters/Conditioners

600 V Discrete IGBTs

September 6, 2012 10:00 am | Product Releases | Comments

Advanced Power Electronics Corp. (USA), a leading Taiwanese manufacturer of MOS power semiconductors for DC-DC power conversion applications, has recently released a new family of high speed 600V discrete IGBTs for use in AC and DC motor control...

LISTED UNDER: Transformers/Converters/Conditioners

Vacuum-Encapsulated Inverters

August 13, 2012 10:51 am | Product Releases | Comments

Endicott Research Group’s SE/SE2 and E200II Series inverters for CCFL-backlit LCDs are vacuum-encapsulated to provide maximum reliability and excellent resistance to shock, vibration and humidity. Widely used in medical diagnostic equipment...

LISTED UNDER: Transformers/Converters/Conditioners | Hand Held Instruments

High Isolation Switch Mode Power Transformers

August 10, 2012 11:07 am | Product Releases | Comments

Pulse Electronics Corporation, a leading provider of electronic components, introduces a new series of high isolation switch mode power transformers that provide a reinforced insulation power supply for RS485 and RS232 transceiver ICs.

LISTED UNDER: Transformers/Converters/Conditioners | Power Supplies

10 Watt AC/DC Converter

August 10, 2012 10:38 am | Product Releases | Comments

The Minmax AHF10 Series is a 10 Watt AC/DC converter in a fully encapsulated 2.52” x 1.77” x 0.75” plastic case featuring PCB mounting with solder pins. This Class II protection Series is compliant to EN55022 Class B/EN61000-5 standards...

LISTED UNDER: Transformers/Converters/Conditioners

Convection cooled 60 W DC-DC converter achieves 92% efficiency

July 25, 2012 9:52 am | XP Power | Product Releases | Comments

XP Power announced the JCK60 series of highly efficient metal cased 60 Watt DC-DC converters aimed at a broad range of telecommunications, networking and industrial applications. Measuring only 2 x 2 x 0.4 inches (50.8 x 50.8 x 10.16 mm), the compact convection cooled JCK60 has a high power density of 37.5 Watts per cubic inch and has no need for any forced air cooling, additional heat sinking or baseplate cooling.

LISTED UNDER: Transformers/Converters/Conditioners

Minmax Power Announces MSGWI06 Series of 6 Watt DC/DC Power Modules

July 10, 2012 12:19 pm | Product Releases | Comments

The Minmax MSGWI06 Series is a compact 6 watt DC/DC converter in an SMD package with a footprint of .87” x .80” x .40”  The product features remote on-off and an ultra wide 4:1 input.

LISTED UNDER: Transformers/Converters/Conditioners

40 Watt DC/DC Converter with International Saftey Approvals

July 10, 2012 11:37 am | Product Releases | Comments

The Minmax MKW40 Series is a 40 Watt DC/DC converter in a compact 1” x 2” shielded metal case with an optional heatsink.  This series is EMC compliant to EN55022 Class A and has international safety approvals, making it ideally suited for worldwide use in space critical applications in a variety of equipment, including battery-powered.

LISTED UNDER: Transformers/Converters/Conditioners

5 Watt DC/DC Converters with -55~95°C Operating Temperature Range

July 2, 2012 11:05 am | Product Releases | Comments

Wall Industries, Inc. broadens its product offering with the DCMUA series of DC/DC power converters. This series delivers 5 Watts of continuous output power in an encapsulated...

LISTED UNDER: Transformers/Converters/Conditioners

New Point-of-Load DC-DC Converter to Include 3A and 5A SIP Packages

May 29, 2012 9:38 am | Murata Power Solutions | Product Releases | Comments

Murata Power Solutions announced the OKX series of miniature non-isolated single output DC-to-DC converters designed for embedded point-of-load (PoL) applications.

LISTED UNDER: Transformers/Converters/Conditioners

50 Watt DC-DC Converters

May 17, 2012 10:23 am | Product Releases | Comments

Wall Industries, Inc. broadens its product offering with the DH50 series, the latest generation of high performance DC/DC power converters setting a new standard concerning power density.

LISTED UNDER: Transformers/Converters/Conditioners

Four-Channel, 16-bit, 125-MSPS A-D Converter

May 16, 2012 7:15 am | Analog Devices, Inc. | Product Releases | Comments

Analog Devices Inc., a global leader in high-performance signal processing technology, introduced today the addition of a 4-channel high-speed A/D converter to its market-leading data...

LISTED UNDER: Transformers/Converters/Conditioners

Highly Efficient High Current Eighth-Brick DC-DC Converters

May 10, 2012 9:59 am | Murata Power Solutions | Product Releases | Comments

Murata Power Solutions today announced the introduction of the UWE series of highly efficient 100 – 120 Watt open frame isolated DOSA-compatible eighth-brick DC/DC converters.

LISTED UNDER: Transformers/Converters/Conditioners


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.