Advertisement

Visible Radiometer for Visible Light Curing Systems

October 13, 2008 12:07 pm | Product Releases | Comments

Consistent curing requires consistent light intensity. The new ACCU-CAL 50V radiometer is simple to operate and offers repeatable measurement of visible light. The ACCU-CAL 50V can measure visible light energy emitted from lightguides (3.0, 5.0, and 8.0 mm), flood systems, and conveyors.

LISTED UNDER: Adhesive-Curing Systems

LED System Offers Cool, Consistent, Visible Light Curing

September 17, 2008 7:00 am | Product Releases | Comments

The BlueWave LED visible light, high-intensity spot curing system offers many advantages over traditional UV spot curing systems including no bulbs to change, cool cures, no warm-up, and constant intensity for thousands of hours.

LISTED UNDER: Adhesive-Curing Systems

Conveyor System Enables 180 Degree UV Curing

September 15, 2008 5:44 am | Product Releases | Comments

When the job calls for 180&#176 curing, the UVCS SideCure conveyor system is an excellent option. Designed for UV curing of the company’s adhesives and coatings from the left, right, and/or top, the conveyor can be outfitted with up to eight 5,000-EC UV curing flood lamps.

LISTED UNDER: Adhesive-Curing Systems
Advertisement

Three Levels of Adhesive Strength for Customized Needs

August 12, 2008 8:14 am | Product Releases | Comments

To assist tape converters and medical device manufacturers in meeting these high-quality

LISTED UNDER: Adhesive-Curing Systems

Visible Light High Intensity Spot Curing

June 11, 2008 11:50 am | Product Releases | Comments

The BlueWave visible light curing system includes no bulbs to change, cool cures, no warm-up, and thousands of hours of constant intensity. The LED system uses surface mount LEDs (light emitting diodes), which produce visible light energy in a relatively narrow wavelength band centered at 410 nm.

LISTED UNDER: Adhesive-Curing Systems

Portable UV Curing System for 3D Surfaces

March 11, 2008 10:05 am | UV III Systems, Inc. | Product Releases | Comments

The Multicure UV curing system features a hand-held quartz lamp which produces a narrow band 365 nm output (other spectrums available) for curing three-dimensional surfaces coated with UV-curable coatings or adhesives.

LISTED UNDER: Adhesive-Curing Systems | Power Supplies

Radiometer

December 10, 2007 9:52 am | Product Releases | Comments

Consistent UV curing requires periodic monitoring of UV intensity or dose. The ACCU-CAL 100 radiometer is simple to operate and offers repeatable measurement of UV light.

LISTED UNDER: Adhesive-Curing Systems

UV Flood Lamp

September 10, 2007 6:53 am | Product Releases | Comments

The company has made several UV flood lamp improvements. The warranty for flood lamp bulbs has been doubled&#151now a 2,000 hour warranty. A new curtain material for the ZIP Shutter has been developed&#151a material that results in longer lifetime before replacement is required.

LISTED UNDER: Adhesive-Curing Systems
Advertisement

UV Curing System

September 7, 2006 5:49 am | Product Releases | Comments

The CoolCureXL RC-801 curing system employs pulsed UV light to provide instant on/off control, fast cycle times, deep penetration, and cool opera-tion; unlike continuous wave mercury lamp systems.

LISTED UNDER: Adhesive-Curing Systems

UV Curing Light

February 9, 2006 8:45 am | Product Releases | Comments

SpotCure-H quickly cures a wider variety of UV adhesives by emitting a broader light spectrum of 300 to 525 nm. An enhanced halogen elliptical reflector lamp also increases light intensity by 75%, improving curing speed.

LISTED UNDER: Adhesive-Curing Systems

MDT Exclusive: UV Curing System

May 3, 2005 8:13 am | Product Releases | Comments

The LED-100 is a UV curing system powered by an advanced light emitting diode that has an output of 600 mW/cm 2 at 365 nm. The compact hand held unit operates from a battery or from a 100-240 AC source.

LISTED UNDER: Adhesive-Curing Systems

UV Cure Systems (1697)

January 6, 2005 10:36 am | Product Releases | Comments

Booth 124 This high intensity product series is designed for medical UV curing. The SuperSpot MAX

LISTED UNDER: Adhesive-Curing Systems

UV Cure Systems

December 6, 2004 7:30 am | Product Releases | Comments

The SuperSpot MAX HP has been coupled with the company’s proprietary extreme intensity FibreFire UV fiber delivery products to create a line of matched precision UV cure systems for automated & semi-automated medical applications.

LISTED UNDER: Adhesive-Curing Systems

Spot-Curing System

December 6, 2004 7:30 am | Product Releases | Comments

The OmniCure Series 2000 delivers repeatable cures through a closed-loop feedback technology. The end-user selects the required output levels; the OmniCure then locks in the settings, and continuously monitors and maintains them.

LISTED UNDER: Adhesive-Curing Systems

Curing Light (1167)

September 3, 2004 5:50 am | Product Releases | Comments

Loctite&reg 7700&#153 Hand Held LED Light Source is a high-powered, portable curing system that consistently cures many UV/visible light curing adhesives in seconds. Featuring patent pending LED curing technology, the 7700 offers a typical output of 500 mW/cm 2 at a wavelength of 405 nm.

LISTED UNDER: Adhesive-Curing Systems

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading