Advertisement
Dispensers/Fillers

Super-Flow Spray Gun System

October 17, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Dymax Corporation has introduced the new SG-200 Super-Flow Spray Gun System, designed for masking and coating applications where significantly higher flow rates are required. With achievable flow rates of 2.5 – 20 oz. per minute, the system helps operators...

LISTED UNDER: Dispensers/Fillers | Flow

Production of Monodispersed Droplets

October 14, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Dolomite Microfluidics, a sister company to flow chemistry specialist Syrris, has developed an innovative range of Micro Droplet Systems for automatic, seamless production of monodispersed droplets. Built around Dolomite’s pulseless pressure pumps...

LISTED UNDER: Dispensers/Fillers | Dispense

Automated Fluid Dispensing Systems

October 9, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Nordson EFD, a Nordson company, introduces its new series of automated fluid dispensing systems for streamlined integration into any manufacturing operation. The PRO Series integrates vision and laser height sensing with closed-loop encoding to provide a complete automated solution that is...

LISTED UNDER: Dispensers/Fillers | Dispense
Advertisement

Benchtop Vision Guided Dispensing System

September 3, 2014 8:30 am | by MDT Staff | Dispense Works, Inc. | Product Releases | Comments

The Dispense Works RP Series robotic dispensing system with an optional vision guided system performs pattern recognition and edge / hole detection for simpler setup and fixturing, while assuring repeatability from part to part...

LISTED UNDER: Dispensers/Fillers

High-Speed, High-Accuracy, Precision Fluid Dispensing System

July 2, 2014 12:36 pm | by MDT Staff | Product Releases | Comments

Nordson ASYMTEK has introduced high-speed, high-accuracy, scalable fluid dispensing systems with new Class 100 (ISO 5) compatible configurations. Nordson ASYMTEK's new Spectrum II Cleanroom Series was specifically created for applications that are sensitive to contamination...

LISTED UNDER: Dispensers/Fillers

Ultrasonic Generator

May 22, 2014 8:00 am | by MDT Staff | Sono-Tek Corporation | Product Releases | Comments

Sono-Tek Corporation has introduced a new, next generation ultrasonic generator. The ECHO ultrasonic generator is designed for the highest degree of accuracy and control of ultrasonic spray processes using Sono-Tek ultrasonic nozzle technology...

LISTED UNDER: Dispensers/Fillers

Benchtop Bottle/Vial Filler

April 23, 2014 8:10 am | by MDT Staff | Dispense Works, Inc. | Product Releases | Comments

The Dispense Works RP Series Robotic system will streamline your manual filling and capping operations with one precise and affordable bench top package. This system requires no PC for operation, and provides all preprogrammed software...

LISTED UNDER: Dispensers/Fillers

Fluid Dispensing Systems at IPC APEX 2014

March 19, 2014 9:02 pm | by MDT Staff | Product Releases | Comments

Nordson ASYMTEK will be exhibiting new jetting, dispensing, and conformal coating systems and 2-component material static and active mixing technology at IPC APEX 2014 in booth #1937, March 25-27, 2014 at the Mandalay Bay Resort and Conference Center, Las Vegas, NV.

LISTED UNDER: Dispensers/Fillers
Advertisement

Advances in Hot Melt Dispensing

March 17, 2014 11:03 pm | by MDT Staff | Product Releases | Comments

Fisnar has announced a new range of Thermadose hot melt production equipment. Machine improvements provide the ultimate in pulse-free temperature controlled thermoplastic dispensing for industrial applications using pressure sensitive adhesives, contact adhesives, waxes and sealants...

LISTED UNDER: Dispensers/Fillers

Fluid Dispensing Refinement in Large-Format Platform

February 27, 2014 4:14 pm | Product Releases | Comments

Nordson ASYMTEK has introduced the Quantum Q-6800 high-performance, large-format dispensing system for SMT, PCB packaging, and microelectronics assembly applications. Quantum's dispense area of 423 x 458 mm handles a wide range of substrate sizes and is large enough so the dispense area isn't compromised...

LISTED UNDER: Dispensers/Fillers

Fluid Dispensing Solutions at MD&M West

January 21, 2014 5:34 pm | by MDT Staff | Product Releases | Comments

Techcon Systems will showcase the TS9200 Series Jet Tech valve in Booth #3340 at MD&M West, scheduled to take place February 11-13, 2014 at the Anaheim Convention Center in Anaheim, CA.

LISTED UNDER: Adhesive Dispensers | Dispensers/Fillers

The Latest Precision Fluid Dispensing Systems at MD&M

January 21, 2014 5:29 pm | by MDT Staff | Product Releases | Comments

Fisnar can be located at Booth 2959 and will be demonstrating its latest precision fluid dispensing systems and consumables. Several examples of industrial robots are on show and include gantry, cantilever and desktop models. Metering & mixing systems for dual part fluids will be presented including the latest advances in progressive cavity machines.

LISTED UNDER: Adhesive Dispensers | Dispensers/Fillers

5D Desiccant Dispenser

April 26, 2013 4:36 pm | AZCO Corp. | Products

AZCO Corp. 5D desiccant dispenser is compact in size, easy to use, and affordable. With dimensions of 7”x12”x14”, the 5D dispenser is smaller than other dispensers, by far. Just plug it in for easy use. It is affordable and economical, and it offers you freedom of choice to run all desiccants. Self teaching optic technology imbedded into the cutting head gives you the ability to run different types of material through the dispenser. The unit is self-threading, making the aligning of the material uncomplicated. The unique cantilever design offers full access to all the components, which makes set up and replacement quick and easy.

LISTED UNDER: Dispensers/Fillers

VIP-100 Dispenser

April 26, 2013 4:16 pm | AZCO Corp. | Products

Setting up the VIP-100 is easy with the color touchscreen. Product changes can be made without the use of tools in just 90 seconds, with knife replacement done in just 60 seconds. Equipped with feed tracking technology, this unit can process continuous strips of pouches at up to 300 cycles per minute. Software is included that monitors the position of the seals to detect any errors, resulting in accurate and consistent dispensing of products. The cantilever design offers complete access to the process, and the open exit chute virtually eliminates any complicated jamming situations. In the event of any technical difficulties, remote access allows us to provide immediate online diagnostics and technical support from anywhere in the world.

LISTED UNDER: Dispensers/Fillers

Robotic Fluid Dispensing

April 25, 2013 4:30 pm | by MDT Staff | Dispense Works, Inc. | Product Releases | Comments

Dispense Works has released a new device, ideal for larger dispensing applications. The RG 4836 Series offers machine tool performance in standard travels up to 4’ x 8’. Configurations for single and 2 part material dispensing are included.

LISTED UNDER: Machining | Dispensers/Fillers

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading