Advertisement

Versatile Hand-Held Spray Gun Systems Simplify Manual Spraying Process

August 8, 2012 10:11 am | Dymax Corporation | Product Releases | Comments

Dymax Corporation’s SG-100 hand-held spray gun systems, available in both standard- and high-flow models, provide a solution for manually spraying materials for masking and coating applications.

LISTED UNDER: Dispensers/Fillers

High Performance, Low Resistance Gap Filler Pad

October 7, 2011 6:09 am | Fujipoly America Corp. | Product Releases | Comments

Fujipoly announces the availability of Sarcon® 50G-Hm. This high performance, low resistance gap filler pad is manufactured with a special low-tac top surface.

LISTED UNDER: Dispensers/Fillers

Thermal Gap Filler Material

September 23, 2011 6:48 am | Fujipoly America Corp. | Product Releases | Comments

To help remove performance-killing heat from these types of complex, multi-level printed circuit board designs, Fujipoly has developed Sarcon® GR-SL, an extremely low compression and high-performance thermal gap filler material.

LISTED UNDER: Dispensers/Fillers
Advertisement

Thermal Gap Fillers Combine High Performance, Low Pricing

June 29, 2010 7:29 am | Mh&W International Corp | Product Releases | Comments

TP-S30 thermal interface pads from MH&W International provide 3.0 W/mK of thermal conductivity between hot components and heat sinks at lower costs than competing gap filler materials.

LISTED UNDER: Dispensers/Fillers | Silicone | Die Cutting

Filler Simplifies Validation for High Purity Aseptic Filling

June 16, 2010 7:15 am | Watson Marlow Pumps Group | Product Releases | Comments

Watson-Marlow, a leading manufacturer of aseptic peristaltic filling systems, combines its high precision Flexicon peristaltic filling technology with DAFPA, a ready-to-use fully disposable aseptic fluid path.

LISTED UNDER: Dispensers/Fillers

Single-Channel Controller Module Offers Additional Features

February 9, 2010 4:12 am | Ivek Corporation | Product Releases | Comments

IVEK Corp. (MD&M West Booth 3311) introduces the Digispense 3020 single-channel controller module designed to replace the Digispense 2000 controller. Dispensing small to large amounts of fluid (i.e., 1.0 ul to 2.

LISTED UNDER: Dispensers/Fillers | Actuators | Actuators

Filling and Capping System Does Not Require PC for Operation

January 14, 2009 9:25 am | Dispense Works, Inc. | Product Releases | Comments

The Ring Dex filling and capping system is ideal for processing small bottles, tubes, and vials in a compact and affordable bench top package. It features a true file based control system requiring no PC for operation.

LISTED UNDER: Dispensers/Fillers

Programmable Dispensing System Offers Continuous Flow Option

September 30, 2008 7:06 am | Fluid Metering, Inc. | Product Releases | Comments

The Sensata is a programmable dispensing system that uses precision stepper motors to control a variety of the company's patented valveless piston pumps. It has a range from 500 nanoliters per dispense to 2 liters per minute continuous flow.

LISTED UNDER: Dispensers/Fillers | Control | Flow
Advertisement

Jet Dispensing Systems Aid Product Miniaturization Trend for Manufacturers

August 21, 2008 9:54 am | Nordson Corporation | Product Releases | Comments

The PicoDot Jet Dispensing System addresses the miniaturization trend as medical devices continue to put more and more features into smaller packages. Manufacturers need new ways to apply adhesives, coatings, and other assembly fluids in smaller, more precise amounts.

LISTED UNDER: Dispensers/Fillers

Turnkey Benchtop Automated Solutions for Potting and Gasketing Small Parts

August 12, 2008 8:14 am | Graco Ohio Inc | Product Releases | Comments

Graco has introduced the Liquid Control C-402 and C-404 turnkey benchtop automated dispensing systems. These units are the ideal solution for manufacturers to automate their small parts products.

LISTED UNDER: Dispensers/Fillers

Justifying a Dispensing Robot

May 8, 2008 8:41 am | Product Releases | Comments

The assembly industry is vast in its scope and incorporates many independent disciplines for device manufacture. A primary segment of the assembly process that is naturally designated for automation is dispensing.

LISTED UNDER: Dispensers/Fillers

RoHS Approved Liquid Dispenser

March 11, 2008 7:18 am | I & J Fisnar, Inc. | Product Releases | Comments

The JB1113-LF now conforms to RoHS requirements. High volume manufacturing passes on significant cost savings to users. Features include timed pulse shot and continuous mode operation.

LISTED UNDER: Dispensers/Fillers | Control

Digital Fluid Dispenser

January 15, 2008 8:30 am | I & J Fisnar, Inc. | Product Releases | Comments

The SL101 is a self-teach, RoHS compliant, CE mark, bench top dispenser with a bright LCD and 10 memory locations to automatically cycle 10 self-taught programs. Auto-cycling is one of three operation modes available.

LISTED UNDER: Dispensers/Fillers

Lubricant Dispensing

December 10, 2007 9:53 am | I & J Fisnar, Inc. | Product Releases | Comments

Machine parts that require constant lubricating of their surface areas, such as gears and rollers, can be serviced by the use of a precision spray valve and sequence controller.

LISTED UNDER: Dispensers/Fillers | Control

Dispensing Industrial Robots

October 9, 2007 11:24 am | I & J Fisnar, Inc. | Product Releases | Comments

The I&J4000-LF maintains the compact style and functionality expected of this company’s robot designs and continues to build upon the range of precision multiple axis products that are ideal for many automatic bench dispensing applications.

LISTED UNDER: Dispensers/Fillers

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading