Meter, Mix, and Dispense System

August 10, 2007 5:11 am | Graco Ohio Inc | Product Releases | Comments

The Liquid Control PR70 is a meter, mix, and dispense system that sets a higher standard for performance, reliability, and accuracy. Built to handle medium-to-low viscosity materials, it is ideal for potting, gasketing, sealing, encapsulation, and syringe filling.

LISTED UNDER: Dispensers/Fillers

Cleanroom Dispensing

February 9, 2007 5:07 am | Asymtek | Product Releases | Comments

The Axiom X-1000 series dispensing system is equipped with a stainless steel enclosure for manufacturing in Class 100 cleanrooms. The system is specifically designed for applications that are extremely sensitive to contamination by sub-micron sized particles.

LISTED UNDER: Dispensers/Fillers

Bench Cat Dispenser

January 18, 2007 11:36 am | Dispense Works, Inc. | Product Releases | Comments

The Bench Cat dispenser is an affordable solution to automate fluid dispensing, spraying, and filling applications. The unique centered and balanced drive provides accuracy and stability within the entire 14 in. wide travel.

LISTED UNDER: Dispensers/Fillers

Dispensing System (2953)

April 6, 2006 7:32 am | Fluid Metering, Inc. | Product Releases | Comments

The Smooth-flo fluid delivery system is a fully programmable dispensing system which is controlled by precision stepper motors. The phase-canceling technology uses three separate valveless pump heads, uniquely timed, to eliminate pulsation.

LISTED UNDER: Dispensers/Fillers | Control

Dispensing Robot

February 8, 2006 5:56 am | I & J Fisnar, Inc. | Product Releases | Comments

The I&J7100 bench top Cartesian dispensing robot handles a dispensing area of 8 x 6 in. and is capable of storing up to 100 different programs. Step-by-step intuitive instructions simplify job creation tasks, allowing a program to be entered and running in minutes.

LISTED UNDER: Dispensers/Fillers

Dispense System (2679)

February 6, 2006 10:29 am | Sealant Equipment & Engineering, Inc. | Product Releases | Comments

The 505 Fixed-Ratio Meter System is designed for automated, robotic, or manual dispensing applications. This single-servomotor dispensing system allows fixed and variable dispense rates while providing on-ratio materials which meet suppliers’ specifications.

LISTED UNDER: Dispensers/Fillers

Meter/Mix/Dispense System

November 2, 2005 6:41 am | Dtic Dispensing Technologies | Product Releases | Comments

The EZ-mix VR variable ratio meter, mix, and dispense system is a piston-based software-driven positive displacement system that provides accurate mixing without changing gears or other time-consuming mechanical adjustments.

LISTED UNDER: Dispensers/Fillers

Filter End Cap Potting

September 3, 2004 5:50 am | Gusmer/Decker | Product Releases | Comments

The DL3-PC utilizes a Posiflow rotary pump design which has no gears to wear and is resistant to abrasive fillers. Both pumps are driven by brushless AC motors. A key feature is touch pad programming of mix ratio and flow rates.

LISTED UNDER: Dispensers/Fillers

Dispense Pump

March 4, 2004 5:50 am | Product Releases | Comments

The IDS-2000ARH Industrial Dispense Pump is designed for industrial production and process applications requiring maintenance free, precision, low volume fluid control. It is CE approved and integrates the patented CeramPump&reg valveless piston pumping principal with precision stepper control.

LISTED UNDER: Dispensers/Fillers | Control

Nanoliter Liquid Dispensing

March 4, 2004 5:50 am | Precision Dispensing, Inc. | Product Releases | Comments

The nanoDispense&#153 System is an integrated fluidic module ideal for nanoliter liquid dispensing applications.

LISTED UNDER: Dispensers/Fillers | Control | Fittings

Silicone Dispenser

February 6, 2004 8:46 am | Efd Inc. | Product Releases | Comments

The UltraSaver 1200 air-powered dispensing system makes it easy to apply accurate, consistent amounts of thick room temperature vulcanizer (RTV) silicones without hand fatigue, rework, or cleanup.

LISTED UNDER: Dispensers/Fillers | Silicone

Dispense System (351)

February 6, 2004 8:46 am | I & J Fisnar, Inc. | Product Releases | Comments

Accurate dispensing of two-part materials from twin-pack dual component cartridges has always been a problem where small shots of material are required. The I&J123-DMIX mechanical dispense system can dispense from 200, 400, and 600 ml cartridges with ratios of 1:1, 2:1, and 10:1.

LISTED UNDER: Dispensers/Fillers

Dispense System

July 31, 2003 11:33 am | Sealant Equipment & Engineering, Inc. | Product Releases | Comments

The air-powered fixed-ratio See-Flo&reg 582 meter/mix/dispense system is designed for precise and reliable dispensing of low-viscosity two-component adhesives or sealants. Floor-, cart-, or pail-top-mounted, the See-Flo 582 is modular and easily adapted to a wide range of applications.

LISTED UNDER: Dispensers/Fillers


July 31, 2003 11:33 am | I & J Fisnar, Inc. | Product Releases | Comments

The I&J123-D50 is designed to eliminate the problems of working with 50 ml cartridges when accurate and repeatable dispense cycling is required. The system includes a stepping motor drive, coupled by a Hydro-Link&reg to a double contact-ram that enters both barrels of the 50 ml cartridge.

LISTED UNDER: Dispensers/Fillers

Air-Powered Dispenser

January 10, 2003 9:02 am | Efd Inc. | Product Releases | Comments

The Ultrasaver&#153 multi-purpose dispensing system gives manufacturers an easy, cost-effective way to switch from squeeze bottles to air-powered dispensing of adhesives, sealants, and other assembly fluids.

LISTED UNDER: Dispensers/Fillers


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.