Advertisement
Production Tools

Digital Printing Service For Front Panels and Enclosures

March 27, 2015 4:57 pm | by OKW Enclosures, Inc. | OKW Enclosures, Inc. | Product Releases | Comments

OKW’s metal enclosures division METCASE is pioneering the use of digital printing for front panels, rack cases and instrument housings. METCASE’s new state of the art digital technology means legends, logos and complex photo quality graphics can be printed on front panels and...

LISTED UNDER: Production Tools

Eureka Dry Cabinet Ultra Low Humidity Storage

March 25, 2015 4:59 am | Eureka Dry Tech | Products

Medical grade products requires strict control during design & manufacturing process. Moisture affects product quality, reliability and yield. Eureka's Ultra Low Humidity Dry Cabinets provides storage environments of <5%RH, <10%RH, <20%RH with fast recovery times, suitable for medical grade devices. Eureka's dry cabinet with powerful multi-porous molecular sieve desiccants will provide alternative drying methods to traditional baking oven, nitrogen purge, vacuum drying and desiccants while meeting IPC/JEDEC J-Std-033 and IPC-1601 standards. Moisture controlled storage cabinets are essential in any manufacturing plant that requires QC traceability. Contact us today for free consultation in moisture control.

LISTED UNDER: Assembly Equipment | Material Handling | Ovens

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

March 4, 2015 1:10 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10v to 1500v DC, or 10v to 1000v RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Wire and Cable
Advertisement

Light Director™ Guided Assembly System: A CableEye® Accessory

March 4, 2015 12:52 pm | CAMI Research, Inc. | Products

For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Assembly Equipment

CableEye® M3U Cable Tester System: Item 821U

March 4, 2015 12:46 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Wire and Cable

Bench Tool Rework Solutions at MD&M West

January 21, 2014 5:40 pm | by MDT Staff | Product Releases | Comments

Metcal announced that it will exhibit in Booth #3340 at MD&M West, scheduled to take place February 11-13, 2014 at the Anaheim Convention Center in Anaheim, CA. The new MX-500 Soldering and Rework System and HCT2-120 Hot Air Pencil will be displayed at the show.

LISTED UNDER: Production Tools

New RFID Lens Enhance Monitoring

January 2, 2014 3:40 pm | by MDT Staff | Product Releases | Comments

TRUMPF has enhanced its LensLine sensor system for 2D laser cutting machines by combining it with an RFID (radio frequency identification) lens to achieve greater accuracy, process reliability and user friendliness. The LensLine condition monitoring function improves the reliability of cutting processes and reduces the frequency of lens cleaning.

LISTED UNDER: Production Tools | Strippers/Cutters

Safety Light Curtain

October 11, 2013 3:16 pm | by MDT Staff | Product Releases | Comments

Keyence has introduced their new GL-S safety light curtain. This exciting addition to the GL series offers a versatile solution for applications where space constraints are a major factor. The GL-S also provides increased ease of use and simplified installation compared to conventional safety light curtains.

LISTED UNDER: Assembly Equipment | Production Tools
Advertisement

Precision-Grade Optical Breadboards

March 28, 2013 9:27 am | by MDT Staff | Product Releases | Comments

Newport Corporation, a worldwide leader in laser and photonic solutions that Make, Manage, and Measure Light, introduces precision-grade (PG) optical breadboards with patented modal damping to improve dynamic performance.

LISTED UNDER: Production Tools

Blades Deliver Sharpness, Cleanness, and Safety for Clean Room Operations

February 20, 2013 10:59 am | by MDT Staff | Product Releases | Comments

Personna blades are designed to meet the rigorous clean, safety and sharpness standards of large and small scale manufacturing operations. The company will unveil a variety of products...

LISTED UNDER: Production Tools | Blades

5-Axis Vise Has Self Centering Design Feature

January 4, 2013 10:12 am | Product Releases | Comments

Kurt announces the expansion of its 5-axis vise offering with the addition of two new MaxLock™ models. These are smaller models with a 2-1/2 inch and a 4-1/2 inch jaw width in addition to the present 4 inch jaw width model.

LISTED UNDER: Assembly Equipment | Material Handling | Production Tools

Mold Building

December 5, 2012 4:24 pm | Crescent Industries, Inc. | Products

Crescent Industries understand quality injection molds produce quality products, which is why our on-site mold building facility is staffed with journeyman mold makers using modern equipment and technology. We produce injection molds following the SPI Class 101-105 guidelines in various configurations and material. In additon, to our cusotm molds we offer our molding building expertise to companies with problem molds. We can provide quick tool modifications and repairs to get you back in production.

LISTED UNDER: CNC Machining | Injection Molding | Molding

Abrasive Blaster Cleans Surgical Instruments

October 15, 2009 6:37 am | Product Releases | Comments

Comco Inc. (Booth 1640), an industry leader in the manufacture of micro-abrasive blasters, offers the AccuFlo abrasive blaster. Surgical tools such as scissors, knives, saws, and scalpels are becoming too expensive to throw away after one use.

LISTED UNDER: Production Tools

Calendar and Metric Conversion Chart

November 10, 2008 6:52 am | Product Releases | Comments

Boker’s, Inc. offers its complementary 2009 Scheduling Calendar and Metric Conversion Chart is now available. This handy calendar serves as an easy-to-use, one-page scheduling tool, with a convenient metric conversion reference on the opposite side.

LISTED UNDER: Production Tools | Stamping

Micro-Abrasive Blaster Offers Effective Finishing

June 27, 2008 5:57 am | Product Releases | Comments

Micro-abrasive blasting is an effective process for deburring needles, selectively removing polymer and PTFE coating from catheters and guide wires, removing encapsulation material from pacemakers, and removing remelt and oxidation on laser cut stents.

LISTED UNDER: Production Tools

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading