Advertisement

Air Filters (3743)

January 18, 2007 11:37 am | Universal Air Filter Co. | Product Releases | Comments

When a design calls for more positive grounding, Spring Clip filters offer more effective EMI shielding. At the same time, they simultaneously help reduce vibration and chatter, and can meet special installation requirements.

LISTED UNDER: Air Pump | Air Filter

Air Filter (3549)

November 6, 2006 11:12 am | Universal Air Filter Co. | Product Releases | Comments

Non-conductive air filters are needed when space is limited and the filter frame may contact electrically charged surfaces or backplanes. This can occur in a variety of applications such as ATCA and MicroTCA chassis, 19” rack mount units, and 1U high enclosures.

LISTED UNDER: Air Pump | Air Filter

Enabling a Device to Breathe

October 11, 2006 7:56 am | W.L. Gore & Associates | Product Releases | Comments

Creating a contaminant and/or vacuum-free drug delivery device, such as an inhaler, nasal pump, or eye dropper, is a difficult task. This article examines a venting option that enables a closed, equalized system for multiunit-dose drug packaging.

LISTED UNDER: PTFE | Vacuum | Air Pump
Advertisement

Choosing a Vent Membrane for a Medical Device

September 5, 2006 7:16 am | Millipore Corporation | Product Releases | Comments

Hydrophobic polymeric membranes are widely used in medical devices to sterilize gases which pass through them or to provide sterile barriers between the atmosphere and device interiors.

LISTED UNDER: PTFE | Insert Molding | Micro Molding

Embedded High Performance Analog Simplifies Portable Medical Design

August 4, 2006 7:17 am | Product Releases | Comments

As more portable electronic medical devices are introduced to monitor and treat patients, manufacturers are seeking technologies with which to reduce the complexity involved in the design of the finished product.

LISTED UNDER: Microprocessor-Based Controls | Medical Device Testing | Component Testing

Internal Form and Finish Critical to Manufacture of Heart Pump

August 4, 2006 7:17 am | Mitutoyo America Corporation | Product Releases | Comments

The Project: Verify that geometry and surface texture of the housing for a heart pump will facilitate smooth functioning while not adversely affecting blood. The Solution: Use extremely accurate instrumentation to measure form and surface to ensure they are compliant with specifications.

LISTED UNDER: Measurement Instruments | Biocompatibility Testing | Microbiology/Chemical Testing

Gas Plasma: A Green Alternative for Surface Engineering

July 5, 2006 11:02 am | Plasmatech, Inc. | Product Releases | Comments

There are many methods with which to affect the surface of a material or device to achieve a desired effect. Therefore, factors related to the process such as environmental considerations or temperature concerns will reduce the number of possible options.

LISTED UNDER: Surface Modification | Vacuum | Cleanroom Assembly

Industrial Air Compressor

May 2, 2006 8:29 am | Sullair Corp. | Product Releases | Comments

A series of air compressors&#151the Sullair 3000, Sullair 3700, and Sullair 4500&#151offer 40, 50, and 60 horsepower and are designed for point-of-use facility installations.

LISTED UNDER: Air Pump | Compressor
Advertisement

Silicone Elastomers for Healthcare Tubing

April 4, 2006 7:38 am | Momentive Performance Materials Inc. | Product Releases | Comments

With the variety of tubing options available to medical device manufacturers, it is often difficult to determine which type would be best suited to a particular application.

LISTED UNDER: Silicone | Vacuum | Injection Molding

Fan Filters

March 9, 2006 12:10 pm | Universal Air Filter Co. | Product Releases | Comments

Meet thermal management and air filtration requirements for blowers and fans&#151axial flow, cross flow, intelligent fan packs, pancake styles&#151with low-profile, low-air resistance filters.

LISTED UNDER: Air Pump

Emphasis on Motion Control: Turning to Ball Screw Technology

February 7, 2006 5:39 am | Skf Usa Inc. | Product Releases | Comments

Precise motion control is critical in a number of medical devices. Unfortunately, with the many options available to manufacturers, it is often difficult to know which solution is ideal for a particular application.

LISTED UNDER: Ball and Lead Screws | Heating Elements | Air Pump

EMI Shielding Air Filters

January 11, 2006 10:42 am | Universal Air Filter Co. | Product Releases | Comments

Need to meet EMI shielding and medical imaging equipment safety and reliability standards for

LISTED UNDER: Air Pump | Metal Filter | Air Filter

Air Filters (2625)

January 11, 2006 10:42 am | Product Releases | Comments

Activator series air filters have multi-stage media construction—layers of multi-denier polyester fibers capture particles throughout the filter's depth. This prevents wasteful "face-loading," increases dust holding capacity, and maximizes the service life of the filter.

LISTED UNDER: Air Pump | Air Filter

Emphasis on Product ID: Easing Counterfeiting Concerns With Covert Microtags

January 9, 2006 11:47 am | Adhesives Research, Inc. | Product Releases | Comments

Product counterfeiting has a negative effect on many industries, but is potentially lethal to manufacturers of medical devices. This exclusive article showcases one technology that offers a solution to companies attempting to combat this growing problem by securing the identity of their products.

LISTED UNDER: Identification Products | Microbiology/Chemical Testing | Medical Device Testing

Liquid Silicone Rubber Resolves Precision Tubing Component Design Challenge

January 6, 2006 11:04 am | Product Releases | Comments

Zevex International Inc., a Salt Lake City, UT manufacturer of enteral nutrition products, chose GE–Silicones’ injection–molded LIM 6050-D2 liquid silicone rubber to design a complex, precision tubing component and solve a big challenge.

LISTED UNDER: Peristaltic | Air Pump | Silicone

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading