GRI’s OEM custom fluid pumps provide superior chemical resistance, accuracy, and contamination-free...
GRI’s new Dosing Pumps are ideal for low flow, low pressure metering applications where a fixed...
The PDS-100 from Fluid Metering Inc. is the solution for high precision, micro-volume production dispensing of fluids used in the manufacture and assembly of medical catheters, stents, & blood tubes.LISTED UNDER: Metering
Handling fluids within a medical device can be a messy, but critically important, task. It is vital for medical device designers to ensure they are making the best selection when it comes to the components that are involved in this portion of the device. This article attempts to clarify the significant considerations in selecting the right pump for a project.LISTED UNDER: Air Pump | Bearing | Bellows
Given the number of device applications that involve the transfer of a gas or liquid, it is no wonder pump technology is such a significant part of many healthcare-related products. In addition, pumps are not exempt from the trends of miniaturization and cost reduction. As such, this article takes a look at how today’s medical device demands are being answered by advanced pump technology.LISTED UNDER: Air Pump | Bearing | Bellows
The STH and STQ Duplex metering pumps from Fluid Metering are ideal for precision mixing, diluting, and proportional metering for OEM medical, analytical, and industrial instrumentation. FMI’s OEM Duplex Metering Pumps consist of two FMI valveless pump heads direct coupled to a single variable stepper motor drive.LISTED UNDER: Metering
The new KNF FMM80 solenoid-driven diaphragm metering pump introduces an ideal solution to dispense liquids accurately in adjustable volumes between 30 ml/stroke and 80 ml/stroke.LISTED UNDER: Diaphragm Pump | Metering | Solenoid
Pilot Plants are the intermediate stage between laboratory experiment and full-scale operation. It’s here where precision fluid control is critical to ensure that the stage up to full-scale production is successful.LISTED UNDER: Metering | Diaphragm Pump | Control
The VMP electronic variable displacement metering pump is offered for accurate dispensing of UV sensitive fluids. Typical fluids that fall into this category are UV curable adhesives, UV coatings, and photo lithography chemicals.LISTED UNDER: Metering | Control
Featuring a high torque, three-phase drive, and a three-digit LED display control module, the IVSP (industrial variable speed pump) is ideal for handling a broad range of fluid viscosities.LISTED UNDER: Metering | Control
The H25 metering series are hydraulically balanced diaphragm pumps. They are engineered to pump some of the toughest solutions imaginable at up to 1200 gpm, while providing ۫% steady state accuracy with a 10:1 turndown ratio, at a fraction of the cost of conventional precision metering pumps.LISTED UNDER: Metering | Diaphragm Pump
Ratio:Matic® pumps consist of two FMI pump heads direct coupled to a single variable speed drive. Each pump head is independently adjustable, and a variety of pump head sizes can be used in combinations to achieve dispensing ratios from 1:1 up to 1000:1.LISTED UNDER: Metering
D10 Series Metering Series Pumps offer ۫% steady state accuracy, repeatability, and linearity, along with ease of installation and rugged construction, making them suitable for a variety of industrial metering applications and environments.LISTED UNDER: Metering
The V200 Stroke Rate Controller is designed for precision control of all FMI V-Series Variable Speed Metering Pumps. The V200 Controller allows pump speed settings to be adjusted either manually in 0.LISTED UNDER: Metering
The 401U/D1 pump, which provides single or multiple channels for precision metering between 0.01 ml to 120 ml per minute, is ideal for perfusion applications.LISTED UNDER: Metering