Advertisement
Metering

Valveless Micro-Volume Fluid Control for Catheter Manufacturing & Assembly

October 7, 2013 3:11 pm | by MDT Staff | Fluid Metering, Inc. | Product Releases | Comments

The PDS-100 from Fluid Metering Inc. is the solution for high precision, micro-volume production dispensing of fluids used in the manufacture and assembly of medical catheters, stents, & blood tubes.

LISTED UNDER: Metering

Custom Fluid Pumps for the Original Equipment Market (OEM)

July 25, 2013 3:56 pm | GRI Pumps | Products

GRI’s OEM custom fluid pumps provide superior chemical resistance, accuracy, and contamination-free designs for medical device applications. GRI’s pumps have made an impact in medical devices for decades with our portfolio of OEM pumps which include Magnetic Drive Pumps, Bellows Metering Pumps, Centrifugal Pumps, Gear Pumps, Oscillating Pumps, Peristaltic Pumps, and our newest line of Magnetic Drive Recirculation Pumps. GRI Pumps has been proven in many medical applications such as cooling systems, chillers, surgical lasers, cosmetic lasers, laser cooling, ultrasonic cleaning, thermal therapy, blood warmers, sterilizers, circulation baths, film processors, x-ray cooling systems, scientific, laboratory and silver recovery equipment.

LISTED UNDER: Centrifugal | Diaphragm Pump | Magnetic-Drive

Bellows Metering Pumps

July 25, 2013 3:54 pm | GRI Pumps | Products

GRI's Bellows Metering Pumps utilize GRI’s proven bellows and valving technology to provide an accurate and long-lasting metering. The proprietary blended polypropylene materials of construction and a wide selection of valve and O-ring elastomers produce chemical resistant pumps capable of handling a wide range of fluids. Bellows Metering Pumps were specifically designed for metering applications requiring low discharge pressures. Bellows pumps have been successfully applied in photo, X-ray and dental film processors, silver recovery systems, scientific and analytical instruments, detergent dispensers, blood analyzing equipment, thermal therapy equipment, waste removal systems, and wastewater and water treatment systems.

LISTED UNDER: Bellows | Chemically Inert | Metering
Advertisement

Dosing Pump

July 25, 2013 3:52 pm | GRI Pumps | Products

GRI’s new Dosing Pumps are ideal for low flow, low pressure metering applications where a fixed flow rate is required. The Dosing Pumps are constructed entirely of plastic and use GRI’s time-proven bellows technology to provide a durable and accurate chemically resistant metering pump. When pumping water in laboratory test conditions, pumps rate at +/- 1%, stroke to stroke. As with all of GRI pumps, the Dosing Pumps are highly OEM customizable. A variety of configurations are available to meet many different system requirements. Typical applications include: Soap Dispensing, Chemical Dispensing, Appliance Market, Warewashing, Water Purification Market, Laboratory Market, HVAC Market, and OEM Markets requiring metering pumps

LISTED UNDER: Bellows | Chemically Inert | Metering

Gear Pumps

July 25, 2013 3:51 pm | GRI Pumps | Products

Gear pumps are designed primarily for metering and transfer applications. Their modular design allows a wide variation of flow ranges with a standard parts set. Gear pumps are self-priming and are “constant flow” pumps when RPM and differential pressure are constant. The materials of construction for bodies, gears and seals, provide a wide range of fluid compatibility.

LISTED UNDER: Chemically Inert | Metering

Right Angle Flow Controls - Series II & Series III

May 9, 2013 2:53 pm | American Cylinder Co., Inc. | Products

Designed to fit directly onto American Air Cylinders. SERIES II - Quick Connect-Disconnect Flow Controls: Features include 360 degree rotation, nickel plated construction, Buna-N seals and the option of a manual knob or screw adjustment. SERIES III - Threaded Fitting Connect Flow Controls: All the advantages of Series II except ports are offered in sizes 10-32 UNF, 1/8", 1/4" and 3/8" NPT.

LISTED UNDER: Flow | Metering | Flow

Diluting and Proportional Fluid Control with ±1% Precision

May 1, 2013 1:01 pm | by MDT Staff | Product Releases | Comments

The STH and STQ Duplex metering pumps from Fluid Metering are ideal for precision mixing, diluting, and proportional metering for OEM medical, analytical, and industrial instrumentation. FMI’s OEM Duplex Metering Pumps consist of two FMI valveless pump heads direct coupled to a single variable stepper motor drive.

LISTED UNDER: Metering

KNF Neuberger, Inc. - FMM80 Solenoid-Driven Diaphragm Metering Pump

December 6, 2012 10:28 am | KNF Neuberger, Inc. | Products

The new KNF FMM80 solenoid-driven diaphragm metering pump introduces an ideal solution to dispense liquids accurately in adjustable volumes between 30 microliters/stroke and 80 microlitrs/stroke. This pump – the latest in a growing family of KNF solenoid pump solutions and engineered to achieve significantly higher dose rates – can be driven with single impulses to deliver discrete micro-volumes or can be operated with a pulsed signal at a frequency up to 10Hz to provide continuous flow rates up to 48 ml/min. Typical applications include medical devices and diagnostic equipment, industrial dosing systems, inkjet printers, water treatment systems, and fuel cells, among many others. The FMM80 pump offers industry-leading service life (more than 500 million strokes), integrates a patented noise-suppression system for quiet-running operation, remains flow-tight in both directions with pressures of 14.5 PSIG at rest, exhibits stability against varying pressure, and sustains high repeatability over the pump’s entire lifetime. The pump’s diaphragm and patented valve system contribute to overall reliability and high performance. A wide selection of available head materials (PP, PVDF, EPDM, FFPM, or PTFE) enable the transfer of virtually all liquids, whether neutral or aggressive, and the pump can be mounted easily in any position using either a manifold or tubing. Value-added accessories include pressure control valves and pulsation dampeners and custom pump solutions can be developed to meet particular application needs.

LISTED UNDER: Chemically Inert | Metering | Solenoid
Advertisement

Solenoid-Driven Diaphragm Metering Pump

December 3, 2012 11:40 am | KNF Neuberger, Inc. | Product Releases | Comments

The new KNF FMM80 solenoid-driven diaphragm metering pump introduces an ideal solution to dispense liquids accurately in adjustable volumes between 30 ml/stroke and 80 ml/stroke.

LISTED UNDER: Diaphragm Pump | Metering | Solenoid

Metering Pumps for Pilot Plants

March 10, 2011 5:28 am | Fluid Metering, Inc. | Product Releases | Comments

Pilot Plants are the intermediate stage between laboratory experiment and full-scale operation. It’s here where precision fluid control is critical to ensure that the stage up to full-scale production is successful.

LISTED UNDER: Metering | Diaphragm Pump | Control

Displacement Metering Pump for Accurate Dispensing

March 11, 2008 7:18 am | Fluid Metering, Inc. | Product Releases | Comments

The VMP electronic variable displacement metering pump is offered for accurate dispensing of UV sensitive fluids. Typical fluids that fall into this category are UV curable adhesives, UV coatings, and photo lithography chemicals.

LISTED UNDER: Metering | Control

Metering Pump

January 15, 2008 8:30 am | Fluid Metering, Inc. | Product Releases | Comments

Featuring a high torque, three-phase drive, and a three-digit LED display control module, the IVSP (industrial variable speed pump) is ideal for handling a broad range of fluid viscosities.

LISTED UNDER: Metering | Control

Metering Pumps (1407)

November 2, 2004 6:01 am | Product Releases | Comments

The H25 metering series are hydraulically balanced diaphragm pumps. They are engineered to pump some of the toughest solutions imaginable at up to 1200 gpm, while providing &#1771% steady state accuracy with a 10:1 turndown ratio, at a fraction of the cost of conventional precision metering pumps.

LISTED UNDER: Metering | Diaphragm Pump

Dispensing/Metering Pumps

September 3, 2004 5:50 am | Fluid Metering, Inc. | Product Releases | Comments

Ratio:Matic&reg pumps consist of two FMI pump heads direct coupled to a single variable speed drive. Each pump head is independently adjustable, and a variety of pump head sizes can be used in combinations to achieve dispensing ratios from 1:1 up to 1000:1.

LISTED UNDER: Metering

Metering Pumps

September 3, 2004 5:50 am | Product Releases | Comments

D10 Series Metering Series Pumps offer &#1771% steady state accuracy, repeatability, and linearity, along with ease of installation and rugged construction, making them suitable for a variety of industrial metering applications and environments.

LISTED UNDER: Metering

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading