Advertisement

Precision Tube and Finishing

June 7, 2010 8:33 pm | Laserage Technology Corporation | Product Releases | Comments

Laserage Technology Corp. (MD&M East Booth 2372) partners with medical OEMs by providing extensive laser processing capabilities and custom cable assembly services.

LISTED UNDER: Precision | Laser Machining | Silicone

High Performance Medical Tubing Offers Many Advantages

February 2, 2010 4:23 am | Microlumen, Inc. | Product Releases | Comments

MicroLumen (MD&M West Booth 2532) manufactures custom tubing for critical applications and low-invasive medical devices. Polyimide is a thermo-set plastic and has excellent mechanical, thermal, and chemical properties.

LISTED UNDER: Polyimide | Micromachining | Laser Machining

Laser Micromachining Technology Lowers Manufacturing Costs of Polymer-Based Medical Devices

October 22, 2009 5:43 am | Resonetics | Product Releases | Comments

Resonetics (Booth 1553) offers the drilling of micro holes; both circular and complex non-circular holes; stripping of polymer insulation from wires, cables, and coils; and cutting of polymer sheets down to 1.

LISTED UNDER: Laser Machining | Micromachining | Laser Micro-Machining
Advertisement

Polymide Indicated for Critical Applications

October 21, 2009 5:32 am | Microlumen, Inc. | Product Releases | Comments

Offered by MicroLumen Inc. (Booth 1224), polyimide is ideal for critical applications and low-invasive medical devices. Polyimide is a thermoset plastic that has excellent mechanical, thermal, and chemical properties.

LISTED UNDER: Polymers | Micromachining | Laser Machining

Norman Noble Launches Next Generation Noble UltraLight Lasermachining Technology

October 15, 2009 6:37 am | Norman Noble, Inc. | Product Releases | Comments

Medical device contract manufacturer Norman Noble Inc. (Booth 1113) has launched Noble UltraLight,

LISTED UNDER: Laser Machining | Laser Machining | Nitinol

Data-Matrix Marking Services Allow for Data Storage in a Small Space

August 5, 2009 10:45 am | Avicenna Technology, Inc. | Product Releases | Comments

Laser machining capabilities include data-matrix marking, allowing for a significant amount of data to be stored in a very small space. This process is typically used for marking small and difficult surfaces.

LISTED UNDER: Laser Marking | Laser Machining

Integrated Linear/Rotary Laser Machining Platforms

March 17, 2009 11:15 am | Product Releases | Comments

The LaserTurn 1 is an integrated linear-rotary motion subsystem that combines automated material handling with high performance direct-drive linear and rotary motion to provide the highest throughput, highest accuracy, cylindrical laser processing system available.

LISTED UNDER: Laser Micro-Machining | Laser Machining

Laser Marking

May 8, 2007 11:29 am | Universal Laser Systems Inc. | Product Releases | Comments

The Professional Laser Series is a line of CO 2 laser systems that provides an impressive combination of high power (up to 120 watts using dual lasers), three popular work table sizes, and an advanced, materials-based print driver that delivers consistently good cutting and engraving results.

LISTED UNDER: Laser Machining
Advertisement

Laser Processing

August 8, 2006 12:51 pm | Avicenna Technology, Inc. | Product Releases | Comments

The laser processing of PEEK and Hytrel tubing is available. This offering is in addition to the company’s established ability to process another hard polymer, polyimide, and compliments its processing of soft polymers such as Pellethane and Pebax.

LISTED UNDER: Laser Machining

Microfabrication Services

February 9, 2006 8:45 am | Mound Laser & Photonics Center, Inc. | Product Releases | Comments

Company has acquired two laser systems to expand its capability in microfabrication. The first laser is a high-pulse repetition rate ultrafast (10 ps) laser and is the company’s second micromachining laser. The image is an “as machined” pattern in titanium. The diameter of the pillar is 0.

LISTED UNDER: Laser Machining | Micromachining | Laser Micro-Machining

Laser Micromachining

February 1, 2005 9:21 am | Product Releases | Comments

Precision UV laser micromachining services with micron-scale features and sub-micron tolerances are offered for a variety of medical device applications.

LISTED UNDER: Laser Machining | Micromachining | Laser Micro-Machining

Technology Transfer Programsfor Small Medical Device Companies

January 3, 2005 9:29 am | Mound Laser & Photonics Center, Inc. | Product Releases | Comments

Two federal initiatives are helping small medical device manufacturing companies bring new technology to the marketplace. Called SBIRs and STTRs, they provide small businesses with an R&D budget. The following article examines the benefits being seen in the laser machining arena.

LISTED UNDER: Product R&D | Micromachining | Laser Machining

Rotary Stage

June 8, 2004 9:52 am | Product Releases | Comments

The ASR1100 series is an extension of the ASR1000 direct-drive rotary stage used in many laser machining applications, including the manufacture of the most technologically-advanced cylindrical devices in use today.

LISTED UNDER: Machining Equipment & Tools | Laser Machining

Laser Machining/Marking

June 8, 2004 9:52 am | Avicenna Technology, Inc. | Product Releases | Comments

Company offers the colorless laser machining of Polyether Urethane tubing, and the vivid laser marking of pigmented Silicone tubing.

LISTED UNDER: Laser Machining | Micromachining | Laser Machining

Vertical Translation Stages

April 1, 2004 11:39 am | Product Releases | Comments

AVS100 series stages offer the ideal solution for applications that require very small incremental movements in elevation above a horizontal plane.

LISTED UNDER: Positioning Stages and Tables | Laser Machining

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading