Advertisement

Small in Size, Big on Precision

April 9, 2007 5:59 am | Product Releases | Comments

Tuebingen Scientific Medical GmbH is a medical device company specializing in instrumentation for minimally invasive surgery. The surgical systems fill in the gap between conventional surgical instruments and surgical robotics.

LISTED UNDER: Medical Device Testing | Component Testing

Electrodynamic Test Instrument

March 12, 2007 1:24 pm | Product Releases | Comments

ElectroPuls is an electrodynamic test instrument that is ideal for a wide range of biomedical testing requirements in industry and universities. With a wide dynamic performance range and excellent low force characteristics, the ElectroPuls systems enable a myriad of mechanical tests to be conducted.

LISTED UNDER: Other Testing Instruments | Medical Device Testing

Composite Materials

March 12, 2007 1:23 pm | Polygon Company | Product Releases | Comments

PolyMed composite materials are offered for a variety of medical applications, including laparoscopic and minimally invasive surgical procedures. PolyMed combines features of traditional metallics and thermoplastic materials.

LISTED UNDER: Composites | Medical Device Testing
Advertisement

Developing Medical Components Utilizing Early Supplier Involvement

March 12, 2007 1:18 pm | Product Releases | Comments

Developing complex plastic medical components for high volume assembly can be greatly enhanced by taking advantage of early supplier involvement.

LISTED UNDER: Molding | Prototyping | Rapid Prototyping

Sterile Packaging Sought as Solution for Infection Prevention

December 5, 2006 12:19 pm | Product Releases | Comments

Trends being observed now in medical device manufacturing are expected to create an increase in the demand for sterile packaging through 2010, according to a report from The Freedonia Group. This article summarizes the findings of the group’s study.

LISTED UNDER: Medical Device Testing

Software Solutions: Building Blocks for FDA Compliance

December 5, 2006 10:48 am | Product Releases | Comments

Many medical device manufacturers have discovered that their choice of ERP

LISTED UNDER: Compliance Software | Injection Molding | Medical Device Testing

Sterility Testing White Paper

November 7, 2006 12:04 pm | Product Releases | Comments

Microtest offers a free white paper, titled: “Sterility Testing: Essential Things You Must Know.” Sterility testing of medical devices is required during the sterilization validation process as well as for routine quality control.

LISTED UNDER: Medical Device Testing

Local-Based CE Certification of Medical Devices Is Available

November 6, 2006 10:37 am | Product Releases | Comments

North American medical device manufacturers have a faster way of obtaining CE certification for exports to Europe.

LISTED UNDER: Medical Device Testing
Advertisement

Silicone Is the Stone That Kills Two Birds

October 13, 2006 9:50 am | Product Releases | Comments

Silicone has emerged as one of the most researched biomaterials available to pharmaceutical makers and medical device manufacturers. As such, it readily lends itself to being an ideal choice for use in combination products where these two industries merge.

LISTED UNDER: Silicone | Injection Molding | Micro Molding

Facing Double Jeopardy in the Testing of Combination Products

October 13, 2006 9:50 am | Microtest Laboratories, Inc. | Product Releases | Comments

Combination products can cause twice as many problems for companies in the testing of these devices since they require expertise in two highly regulated specialties—medical devices and pharmaceuticals. This article offers a number of areas manufacturers of these devices will have to consider.

LISTED UNDER: Medical Device Testing | Cylinders | Biocompatibility Testing

Designing Devices for Patients on the Run

October 13, 2006 8:15 am | Product Releases | Comments

Medical monitoring devices are moving out of the hospital and into the hands of consumers, driving a shift to a platform approach for designing medical electronics.

LISTED UNDER: Design Services | Medical Device Testing | Component Testing

The Combination Products Event for 2007

October 11, 2006 8:48 am | Product Releases | Comments

Reed Life Sciences is excited to announce PharmaMedDevice—the only comprehensive forum that fully illuminates the convergence of the medical device, pharmaceutical, and biologic industries. The inaugural event will be co-located with Interphex, April 24-26, 2007, at the Jacob K.

LISTED UNDER: Business Planning | Microbiology/Chemical Testing | Medical Device Testing

Innovation Plus Collaboration Equals a Successful Combination

October 11, 2006 7:37 am | Product Releases | Comments

Companies need to move rapidly to take advantage of developing trends in healthcare treatment modalities. This article examines many of the factors combination product manufacturers need to consider to accelerate their product’s time to market.

LISTED UNDER: Product Design | Microbiology/Chemical Testing | Wire and Cable

Fabricating Components . . . Rapidly

October 10, 2006 6:15 am | Product Releases | Comments

Medical device manufacturers require device components to be produced quickly to ensure their products are available to the marketplace as soon as possible. However, quality cannot be sacrificed in this effort. Rapid prototype tooling is a unique option that satisfies both of these two criteria.

LISTED UNDER: Rapid Prototyping | Prototyping | Rapid Prototyping

Choosing a Vent Membrane for a Medical Device

September 5, 2006 7:16 am | Product Releases | Comments

Hydrophobic polymeric membranes are widely used in medical devices to sterilize gases which pass through them or to provide sterile barriers between the atmosphere and device interiors.

LISTED UNDER: PTFE | Insert Molding | Micro Molding

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading