Advertisement

Deburring PEEK Implants With Micro-Abrasive Blasting

November 24, 2010 5:19 am | Product Releases | Comments

Comco Inc.’s micro-abrasive blasting equipment can be used to deburr PEEK implants. Though PEEK’s biocompatibility and chemical resistant nature make it an ideal choice for medical implants, it creates challenges to the manufacturing process.

LISTED UNDER: PEEK, PEK | Micromachining | Biocompatibility Testing

Silicone Tubing Stocked in 49 Sizes

October 26, 2010 7:10 am | AdvantaPure | Product Releases | Comments

The wide selection—from 0.03 to 1.0 in. I.D.—is aimed at meeting the various application needs of the pharmaceutical, biomedical, and biotech industries.

LISTED UNDER: Silicone | Silicone | Silicone

Nano Bearings Material Offers up to Six Times More Wear Resistant

October 21, 2010 7:01 am | Product Releases | Comments

Polymer plain bearings made from iglide T500 have been around since the mid-1980s. They run dry at a long-term application temperature of -148°F to 482°F (up to 599°F for short periods).

LISTED UNDER: Bearings | Bearings | Microbiology/Chemical Testing
Advertisement

Complete Range of Testing Services

October 5, 2010 7:12 am | Geneva Laboratories, Inc. | Product Releases | Comments

For over 35 years, the company provides clients with the respect they deserve and offers testing to meet customers' needs in the areas of microbiology, chemistry, toxicology/biocompatibility, and stability/accelerated aging.

LISTED UNDER: Biocompatibility Testing | Microbiology/Chemical Testing | Medical Device Testing

Components Allow Micro-Pump Manufacturer Enhanced Performance Range

July 14, 2010 11:46 am | Product Releases | Comments

Quadrant’s Techtron PPS enables BioChem Fluidics, a leading micro-pump manufacturer, to provide the broadest possible performance range for their line of micro-pumps.

LISTED UNDER: Miniature Valve | Microbiology/Chemical Testing | Component Testing

No-Drip Medical Adhesive Designed for Bonding Vertical Surfaces

December 2, 2009 4:28 am | Master Bond, Inc. | Product Releases | Comments

The EP42HT 2 ND 2 has a paste like consistency and facilitates the adhesive's application when bonding vertical surfaces. This no-run two part epoxy fully complies with the testing requirements for USP Class VI biocompatibility.

LISTED UNDER: Epoxy | Biocompatibility Testing | Microbiology/Chemical Testing

Sterilization Resistant Coating

February 15, 2008 9:34 am | Master Bond, Inc. | Product Releases | Comments

EP42HT-2 is a room temperature curable two component epoxy, adhesive, coating, casting, and sealant material featuring high temperature resistance along with outstanding chemical resistance.

LISTED UNDER: Epoxy | Microbiology/Chemical Testing | Medical Device Testing

Test Connectors

January 10, 2008 10:59 am | Product Releases | Comments

Capable of sealing down to 0.015 inches OD, the ME001 connector is designed for leak testing infusion set and drug delivery devices. Its compact 0.

LISTED UNDER: Connectors | Microbiology/Chemical Testing | Leak Testing
Advertisement

Elastomer Enhances Clearweld Laser Technology

October 11, 2007 10:01 am | Product Releases | Comments

Creating successful medical applications that deliver effective, safe, and accurate patient solutions often requires forging partnerships with the right mix of technological know-how. Natvar, a manufacturer of extruded products for the medical market, and Gentex Corp.

LISTED UNDER: Elastomers | Microbiology/Chemical Testing | Laser Welding

Silicone Is the Stone That Kills Two Birds

October 13, 2006 9:50 am | Product Releases | Comments

Silicone has emerged as one of the most researched biomaterials available to pharmaceutical makers and medical device manufacturers. As such, it readily lends itself to being an ideal choice for use in combination products where these two industries merge.

LISTED UNDER: Silicone | Injection Molding | Micro Molding

Facing Double Jeopardy in the Testing of Combination Products

October 13, 2006 9:50 am | Microtest Laboratories, Inc. | Product Releases | Comments

Combination products can cause twice as many problems for companies in the testing of these devices since they require expertise in two highly regulated specialties—medical devices and pharmaceuticals. This article offers a number of areas manufacturers of these devices will have to consider.

LISTED UNDER: Medical Device Testing | Cylinders | Biocompatibility Testing

The Combination Products Event for 2007

October 11, 2006 8:48 am | Product Releases | Comments

Reed Life Sciences is excited to announce PharmaMedDevice—the only comprehensive forum that fully illuminates the convergence of the medical device, pharmaceutical, and biologic industries. The inaugural event will be co-located with Interphex, April 24-26, 2007, at the Jacob K.

LISTED UNDER: Business Planning | Microbiology/Chemical Testing | Medical Device Testing

Innovation Plus Collaboration Equals a Successful Combination

October 11, 2006 7:37 am | Product Releases | Comments

Companies need to move rapidly to take advantage of developing trends in healthcare treatment modalities. This article examines many of the factors combination product manufacturers need to consider to accelerate their product’s time to market.

LISTED UNDER: Product Design | Microbiology/Chemical Testing | Wire and Cable

Choosing a Vent Membrane for a Medical Device

September 5, 2006 7:16 am | Product Releases | Comments

Hydrophobic polymeric membranes are widely used in medical devices to sterilize gases which pass through them or to provide sterile barriers between the atmosphere and device interiors.

LISTED UNDER: PTFE | Insert Molding | Micro Molding

Internal Form and Finish Critical to Manufacture of Heart Pump

August 4, 2006 7:17 am | Product Releases | Comments

The Project: Verify that geometry and surface texture of the housing for a heart pump will facilitate smooth functioning while not adversely affecting blood. The Solution: Use extremely accurate instrumentation to measure form and surface to ensure they are compliant with specifications.

LISTED UNDER: Measurement Instruments | Biocompatibility Testing | Microbiology/Chemical Testing

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading