Advertisement
Silicon Molding

GW/SM - GW Plastics Scientific Molding

June 3, 2013 4:05 pm | GW Silicones | Products

GW Plastics has taken injection molding to a higher level. GW/SM™ (Scientific Molding) reduces defect occurrence to ensure the highest integrity of product quality; consistently over the life of the project, regardless of molding machine or manufacturing location. At GW Plastics, Advanced Molding Technologies help us maximize manufacturing efficiencies for our customers, stay on the cutting edge of technology and maintain consistent quality on a global scale. Our investment in new technology helps reduce overall product cost, improve supply chain efficiency and time to market.

LISTED UNDER: Injection Molding | Insert Molding | Micro Molding
Advertisement

GW/PT - GW Plastics Precision Tooling

June 3, 2013 4:02 pm | GW Silicones | Products

GW Plastics is one of the few injection molders to offer the significant benefits of in-house mold design-and-build on a global scale. With the state-of-the-art mold building capabilities in both our North American and Asia operations, maximum efficiency and quality is achieved by using highly standardized design practices, highly automated work cells and global cross-training. Building precision tooling requires advanced technological capabilities, a zero defect culture and the highest levels of design integrity. GW Plastics internal mold design-and-build capabilities ensure that customer applications will perform as designed not only at production launch, but consistently throughout the life of the program

LISTED UNDER: Injection Molding | Insert Molding | Micro Molding

GW Silicones

June 3, 2013 3:25 pm | GW Plastics, Inc. | Products

GW Silicones, a division of GW Plastics, Inc., delivers cost-effective, single-source solutions for precision Liquid Injection Molding (LIM) and manufacture of Liquid Silicone Rubber (LSR) components and assemblies. GW Silicones specializes in application-specific material selection, product design and development, in-house precision tooling, and advanced Liquid Injection Molding (LIM) technologies designed to eliminate waste and ensure the highest quality products. Along with a variety of contract manufacturing services such as heat curing, sterilization, assembly, pad printing, and packaging, GW Silicones is a trusted partner for quick prototypes, flawless launch and reliable continuous production.

LISTED UNDER: Injection Molding | Insert Molding | Molding

GW/CM - GW Plastics Contract Manufacturing

June 3, 2013 3:17 pm | GW Plastics, Inc. | Products

The world's market-leading companies turn to GW Plastics as a natural extension to their own production capabilities to injection mold and assemble their products. In addition to our precision plastic injection molding and tooling expertise, we provide turnkey contract assembly support with a lean manufacturing approach. We support a full range of secondary processes including automated and manual assembly, testing, decoration, packaging and fulfillment services in the United States with lower cost alternatives in China, Costa Rica and Mexico. Coupled with industry leading lean manufacturing innovation and a dedication to the rigorous disciplines of quality assurance, GW Plastics is a full service partner.

LISTED UNDER: Injection Molding | Silicon Molding | Cleanroom Assembly

GW/SM - GW Plastics Scientific Molding

June 3, 2013 2:44 pm | GW Plastics, Inc. | Products

GW Plastics has taken injection molding to a higher level. GW/SM™ (Scientific Molding) reduces defect occurrence to ensure the highest integrity of product quality; consistently over the life of the project, regardless of molding machine or manufacturing location. At GW Plastics, Advanced Molding Technologies help us maximize manufacturing efficiencies for our customers, stay on the cutting edge of technology and maintain consistent quality on a global scale. Our investment in new technology helps reduce overall product cost, improve supply chain efficiency and time to market.

LISTED UNDER: Injection Molding | Insert Molding | Molding

GW/PT - GW Plastics Precision Tooling

June 3, 2013 2:40 pm | GW Plastics, Inc. | Products

GW Plastics is one of the few injection molders to offer the significant benefits of in-house mold design-and-build on a global scale. With the state-of-the-art mold building capabilities in both our North American and Asia operations, maximum efficiency and quality is achieved by using highly standardized design practices, highly automated work cells and global cross-training. Building precision tooling requires advanced technological capabilities, a zero defect culture and the highest levels of design integrity. GW Plastics internal mold design-and-build capabilities ensure that customer applications will perform as designed not only at production launch, but consistently throughout the life of the program.

LISTED UNDER: Injection Molding | Micro Molding | Molding

Molding

April 26, 2013 1:39 pm | Specialty Silicone Fabricators | Products

When you partner with SSF, you are working with molding experts who intimately understand the regulatory requirements necessary for validated production for medical applications. Our quality system is designed to ensure our on-going processes are controlled properly to maintain the integrity of those validations. All of our molding can be performed in an ISO 7 or 8 clean rooms coupled with the use of scientifically designed experiments, measurement studies and statistical analysis required for your medical device needs. Silicone materials are typically molded by the following methods: Liquid Injection Molding (LIM), Transfer Molding, Compression Molding. We’ll recommend the type of molding that best suits your needs.

LISTED UNDER: Injection Molding | Insert Micro Molding | Insert Molding

Silicone Vulcanization Process

January 7, 2013 10:34 am | by MDT Staff | Engel North America | Product Releases | Comments

ENGEL North America will introduce their new UV vulcanization process for silicone molding at the upcoming Plastec West show, February 12th -14th, 2013 in Anaheim, CA. On display will be a 110 ton ENGEL emotion all-electric machine...

LISTED UNDER: Molding Equipment | Molding Systems | Silicon Molding

Precision Molded Medical Components and Assemblies

December 20, 2012 10:43 am | Minnesota Rubber & Plastics | Product Releases | Comments

Medical equipment manufacturers seeking a qualified manufacturing partner will find this brochure particularly useful. It details Minnesota Rubber and Plastics’ 65 years of experience in the medical components...

LISTED UNDER: Injection Molding | Molding | Cleanroom Assembly

Fast Cure and Flashless LIMS

June 14, 2012 10:56 am | Product Releases | Comments

Shin-Etsu Silicones of America recently premiered advanced technical demonstrations with industry leading equipment partners at NPE 2012. The demos featured Shin-Etsu’s KEG-2000 LIMS...

LISTED UNDER: Equipment/Tools | Services | Plastics & Elastomers

All-Electric Injection Molding Technology

June 7, 2012 10:10 am | Product Releases | Comments

Milacron Plastics Technologies, a worldwide supplier of plastics-processing technologies, recently presented NPE2012 attendees with a hands-on look at updated Roboshot all-electric injection molding...

LISTED UNDER: Equipment/Tools | Injection Molding | Micro Molding

Fast Cure and Flashless LIMs Products

March 22, 2012 12:50 pm | Product Releases | Comments

Shin-Etsu Silicones of America will be participating in daily technical demonstrations with industry leading equipment partners at NPE 2012 (April 2-5/Orlando, FL). The demos will display...

LISTED UNDER: LIMS (Laboratory Information Management Systems) | Diaphragm Pump | Injection Molding

Broad Array of Medical Compounds

February 24, 2012 5:35 am | Teknor Apex Company | Product Releases | Comments

Teknor Apex Company, long a leading producer of medical-grade compounds, has expanded its offerings to device manufacturers with innovations in both vinyl and thermoplastic elastomers (TPEs)...

LISTED UNDER: Control | Silicon Molding | Silicon Molding

Clean Room Liquid Silicone Rubber Molding and Assembly

February 22, 2012 5:22 am | Rogan Corporation | Product Releases | Comments

Rogan Corporation, a leading molder of plastic components for more than seventy-five years, has added a 1,500 square foot new clean room to its manufacturing facility.

LISTED UNDER: Molding | Molding Equipment | Molding Systems

XYZ Robotic Dispensing System Delivers Fast and Precise Adhesive Placement

November 4, 2011 7:26 am | Product Releases | Comments

Sealant Equipment & Engineering’s new Dual-Station XYZ Robotic Dispensing System is designed to improve adhesive dispensing and product assembly by eliminating problems...

LISTED UNDER: Silicon Molding | Silicon Molding | Silicone

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading