Advertisement
Thermoplastics Molding

GW/SM - GW Plastics Scientific Molding

June 3, 2013 4:05 pm | GW Silicones | Products

GW Plastics has taken injection molding to a higher level. GW/SM™ (Scientific Molding) reduces defect occurrence to ensure the highest integrity of product quality; consistently over the life of the project, regardless of molding machine or manufacturing location. At GW Plastics, Advanced Molding Technologies help us maximize manufacturing efficiencies for our customers, stay on the cutting edge of technology and maintain consistent quality on a global scale. Our investment in new technology helps reduce overall product cost, improve supply chain efficiency and time to market.

LISTED UNDER: Injection Molding | Insert Molding | Micro Molding

GW/PT - GW Plastics Precision Tooling

June 3, 2013 4:02 pm | GW Silicones | Products

GW Plastics is one of the few injection molders to offer the significant benefits of in-house mold design-and-build on a global scale. With the state-of-the-art mold building capabilities in both our North American and Asia operations, maximum efficiency and quality is achieved by using highly standardized design practices, highly automated work cells and global cross-training. Building precision tooling requires advanced technological capabilities, a zero defect culture and the highest levels of design integrity. GW Plastics internal mold design-and-build capabilities ensure that customer applications will perform as designed not only at production launch, but consistently throughout the life of the program

LISTED UNDER: Injection Molding | Insert Molding | Micro Molding

GW/SM - GW Plastics Scientific Molding

June 3, 2013 2:44 pm | GW Plastics, Inc. | Products

GW Plastics has taken injection molding to a higher level. GW/SM™ (Scientific Molding) reduces defect occurrence to ensure the highest integrity of product quality; consistently over the life of the project, regardless of molding machine or manufacturing location. At GW Plastics, Advanced Molding Technologies help us maximize manufacturing efficiencies for our customers, stay on the cutting edge of technology and maintain consistent quality on a global scale. Our investment in new technology helps reduce overall product cost, improve supply chain efficiency and time to market.

LISTED UNDER: Injection Molding | Insert Molding | Molding
Advertisement

GW/PT - GW Plastics Precision Tooling

June 3, 2013 2:40 pm | GW Plastics, Inc. | Products

GW Plastics is one of the few injection molders to offer the significant benefits of in-house mold design-and-build on a global scale. With the state-of-the-art mold building capabilities in both our North American and Asia operations, maximum efficiency and quality is achieved by using highly standardized design practices, highly automated work cells and global cross-training. Building precision tooling requires advanced technological capabilities, a zero defect culture and the highest levels of design integrity. GW Plastics internal mold design-and-build capabilities ensure that customer applications will perform as designed not only at production launch, but consistently throughout the life of the program.

LISTED UNDER: Injection Molding | Micro Molding | Molding

Overmolding Plastic on Medical Devices

February 26, 2013 11:23 am | by MDT Staff | Diversified Plastics, Inc. | Product Releases | Comments

Diversified Plastics has installed a Newbury/VanDorn 80-ton vertical rotary injection molding machine. This gives the company expanded capabilities along with additional production support.

LISTED UNDER: Injection Molding | Molding | Thermoplastics Molding

Silicone Vulcanization Process

January 7, 2013 10:34 am | by MDT Staff | Engel North America | Product Releases | Comments

ENGEL North America will introduce their new UV vulcanization process for silicone molding at the upcoming Plastec West show, February 12th -14th, 2013 in Anaheim, CA. On display will be a 110 ton ENGEL emotion all-electric machine...

LISTED UNDER: Molding Equipment | Molding Systems | Silicon Molding

Brochure Shows Victrex Peek Polymer

September 5, 2012 10:41 am | Victrex Usa Inc. | Product Releases | Comments

When molders are tasked with forming large and intricate parts out of advanced thermoplastics, they are using VICTREX® PEEK, a high performance polymer with more than 30 years of proven success...

LISTED UNDER: PEEK, PEK | Polymers | Injection Molding

Peek Polymers Can Reduce Weight, Improve Reliability

August 21, 2012 11:02 am | Victrex Usa Inc. | Product Releases | Comments

Aerospace, automotive, and electronics engineers have been tasked with finding material solutions that can reduce weight, improve functionality, and help consolidate or miniaturize parts in some of the most demanding environments.

LISTED UNDER: PEEK, PEK | Injection Molding | Thermoplastics Molding
Advertisement

Broad Range of High Purity TPV medical Elastomers Eliminate Pre-Drying

July 10, 2012 11:52 am | Teknor Apex Company | Product Releases | Comments

Spanning 15 to 80 Shore A Hardness Range, Medalist® MD-200 Series from Teknor Apex Exhibits Low Compression Set in Rubber-Replacement Applications like Stoppers, Seals, and Gaskets.

LISTED UNDER: Rubber | Thermoplastics Molding

Elastomer Technology Delivers Optimum Grip Even When Wet

January 23, 2012 6:58 am | Product Releases | Comments

KRAIBURG TPE, a leading supplier of thermoplastic elastomers (TPEs), has launched ground-breaking elastomer technology which results in TPE materials with optimum grip...

LISTED UNDER: Elastomers | Injection Molding | Handles and Knobs

Medical TPEs Provide Superior Alternative to Rubber in Plunger Tips

October 25, 2011 7:07 am | Product Releases | Comments

Plas-Tech Engineering, Inc., a custom molder specializing in innovative medical components, has selected Medalist® elastomers as one of several high-performance alternatives to conventional materials for a new range of single-use syringes...

LISTED UNDER: Rubber | Injection Molding | Silicon Molding

Contract Manufacturer of Single-Use Medical Devices

October 21, 2010 7:27 am | Ndh Medical, Inc. | Product Releases | Comments

Specializing in custom extrusion, including PVC alternatives, NDH provides tubing available in a wide range of medical grade thermoplastics.

LISTED UNDER: Injection Molding | Insert Molding | Thermoplastics Molding

Improved Medical Polymer Offers Improved Strength and Innovative Surface Technology

October 30, 2009 7:05 am | DSM | Product Releases | Comments

DSM PTG, part of DSM Biomedical, a global leader in biomedical materials science, offers the Bionate II PCU, a versatile medical polymer with built-in surface technology designed for chronic implants.

LISTED UNDER: Polymers | Injection Molding | Surface Modification

Precision Injection Molding for Plastic and Metal Components

September 10, 2008 8:33 am | Polymer Technologies, Inc. | Product Releases | Comments

Company's injection molding process offers many advantages, including molding net-shaped components, reliable and consistent high volume production, and production of net shape parts in a variety of medically-approved materials.

LISTED UNDER: Injection Molding | Injection Molding | Thermoplastics Molding

Helix Medical Expands Manufacturing Capabilities

August 12, 2008 8:15 am | Helix Medical | Product Releases | Comments

Helix Medical now oversees the operations of APEC, a thermoplastic and silicon injection molding company. APEC utilizes ARBURG and TOYO presses ranging from 28-300 tons, and also offers advanced silicone injection molding with seven silicone LIM cells.

LISTED UNDER: Injection Molding | Silicon Molding | Silicon Molding

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading