Medical Design Technology

Gamma Contract Services

Ethylene Oxide Versus Radiation Sterilization

May 30, 2013 3:52 pm | by Wendy Wangsgard, Radiation Sterilization Study Director, and Courtney Lang, Ethylene Oxide Sterilization Study Director, Nelson Laboratories | Articles | Comments

Ethylene oxide and radiation sterilization make up two of the most common forms of sterilization for medical devices. As the device is prepared for release to market, knowing which type of sterilization to use for each product can save time and money.

LISTED UNDER: E-Beam Equipment | E-Beam Monitoring Devices/Supplies | EtO Equipment
Advertisement

E-Beam vs. Gamma Sterilization

May 23, 2013 2:39 pm | by Larry Nichols, COO, and Bob Starrett, CTO, NUTEK Corporation | NUTEK Corporation | Articles | Comments

Many of the sterilization issues concerning gamma and electron beam radiation are the same. This point is supported by the fact that both technologies are governed by the same ISO standards when applied to medical device sterilization—ISO 11137 and ISO 13409. Both technologies have been proven effective at sterilization and are accepted worldwide.

LISTED UNDER: E-Beam Equipment | E-Beam Monitoring Devices/Supplies | Gamma Equipment

Changing from Gamma to E-Beam

May 21, 2013 2:38 pm | by Larry Nichols, COO, and Bob Starrett, CTO, NUTEK Corporation | NUTEK Corporation | Blogs | Comments

Ordinarily, changing from a validated gamma sterilization process to E-beam sterilization requires running a dose mapping study and doing a dose verification study similar to a routine quarterly dose audit. The standard radiation validation requirements of ISO 11137 require that data be “available to show that, using the same sterilization dose, microbial inactivation is not affected by differences...

LISTED UNDER: E-Beam Equipment | E-Beam Monitoring Devices/Supplies | Gamma Equipment

Gamma Engineering Run Program Offered to Test Effects

October 9, 2008 6:05 am | Product Releases | Comments

STERIS Isomedix Services is pleased to offer the Gamma Engineering Run program at its Libertyville North, IL facility.

LISTED UNDER: Gamma Contract Services

Technical Support

September 30, 2005 11:34 am | Steris Isomedix Services | Product Releases | Comments

TechTeam is a sterilization technical support group that helps revalidate existing sterilization processes, develop new product validations, examine materials for medical devices, and assist with gamma, EtO, and electron beam sterilization needs.

LISTED UNDER: Gamma Contract Services
X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading