Advertisement
Equipment

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

March 4, 2015 1:10 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10v to 1500v DC, or 10v to 1000v RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Wire and Cable

Light Director™ Guided Assembly System: A CableEye® Accessory

March 4, 2015 12:52 pm | CAMI Research, Inc. | Products

For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Assembly Equipment

CableEye® M3U Cable Tester System: Item 821U

March 4, 2015 12:46 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

LISTED UNDER: Rapid Prototyping Equipment | Cable Assemblies | Wire and Cable
Advertisement

High-Precision Measuring Station

February 25, 2015 10:21 am | by Mahr Federal, Inc. | Mahr Federal, Inc. | Product Releases | Comments

Mahr has introduced a new high-precision measuring station to measure and evaluate optical components, including freeform, aspheric, and spherical lenses. Developed to provide quick 2D and 3D testing to support the entire lens production process, the MarForm MFU 200 Aspheric 3D is CNC operated with nine...

LISTED UNDER: Measurement Instruments

Vortex Flowmeter

February 20, 2015 12:06 pm | by Krohne, Inc. | Product Releases | Comments

KROHNE, Inc. announces the availability of the new OPTISWIRL 4200 vortex flowmeter, ideal for advanced energy management systems. Used to measure both conducting and non-conducting liquids, gases and steam, the new OPTISWIRL 4200 vortex flowmeter can be used for internal monitoring of energy flows for saturated and superheated steam or hot water, and heat metering applications. It...

LISTED UNDER: Flow Meters

NIR Spectrometer System

February 20, 2015 12:03 pm | by Krohne, Inc. | Product Releases | Comments

KROHNE, Inc. announces its new SpectroBAY process near-infrared (NIR) spectrometer system for efficient process control in the chemical industry. Improving chemical plant reliability and profitability through automated control, the SpectroBAY system is ideal for a range of applications, including fluids, gases, and suspensions in conjunction with optical sensors. Chemical plants...

LISTED UNDER: Analyzers | Gauges, Meters, Monitors | Other Testing Instruments

Portable Surface Finish Gages

February 17, 2015 1:18 pm | by Mahr Federal, Inc. | Mahr Federal, Inc. | Product Releases | Comments

Mahr Federal has introduced an updated version of its Pocket Surf portable surface finish gage. Pocket Surf portable surface finish gages have enjoyed wide popularity for more than 30 years and across many precision applications because of their exceptional utility and simple one-button operation. The new Pocket Surf IV builds on that reputation...

LISTED UNDER: Gauges, Meters, Monitors

5 GS/s Digitizers

February 13, 2015 6:35 am | by Spectrum Instrumentation Corp. | Product Releases | Comments

Spectrum is offering a solution to engineers and scientists looking to capture and analyze fast electronic signals in the DC to 1.5 GHz frequency range. The company has greatly extended the performance of its PCIe based instruments by adding nine new models to its M4i series of digitizers...

LISTED UNDER: Meters | Data Acquisition | Oscilloscope
Advertisement

EMC Probe Kit

February 11, 2015 3:23 pm | by Saelig Company, Inc. | Saelig Company, Inc. | Product Releases | Comments

The TBPS01-TBWA2 EMC Probe Kit includes investigative near-field probes and a wideband amplifier to increase the versatility of economical spectrum analyzers to identify EMC issues. The economical TBPS01-TBWA2 EMC Probe Kit consists of four rubber-handled near-field probes (three H-field and one E-field), a 20dB or a 40dB wideband amplifier, and associated cables, supplied in an attractive...

LISTED UNDER: Analyzers | Circuit Testing

HD Video Camera with USB 3.0 Option

February 3, 2015 6:12 pm | by Toshiba Imaging Systems Division | Toshiba Imaging Systems Division | Product Releases | Comments

Toshiba America Information Systems, Inc.’s Imaging Systems Division, announces the IK-HD5U, its first high-definition, 3-CMOS video camera with full frame rate HD output via USB3.0. The new progressive-scan full-HD 1080p/1080i video camera features both DVI-D...

LISTED UNDER: Optical Inspection

Electrical Safety Analyzer

January 26, 2015 12:58 pm | by Chroma Systems Solutions, Inc. | Product Releases | Comments

The 19032 series combines Hipot, Insulation Resistance (IR), Ground Bond (GB), Leakage Current (LC)/AC LC/DC LC and Dynamic Function Tests. Savings can be up to 50% of production line space, by not purchasing several safety test instruments. The 19032 is able to increase the efficiency of electrical safety testing during...

LISTED UNDER: Meters | Analyzers | Measurement Instruments

Piezo Nanopositioning Stages

January 13, 2015 3:56 pm | by Aerotech, Inc. | Aerotech, Inc. | Product Releases | Comments

Aerotech QNP-XY series piezo nanopositioning stages provide the resolution, linearity, repeatability, and high dynamics required for the most demanding applications from microscopy to optics alignment. With resolution to 0.15 nm, linearity to 0.007%, and repeatability to 2 nm, nanometer-level precision is assured. With the highest dynamics (resonant frequency and stiffness) of any other...

LISTED UNDER: Positioning Stages and Tables | Microscopes

Wireless Data Transmission for Portable and Bench Gages

December 10, 2014 2:21 pm | by Mahr Federal, Inc. | Mahr Federal, Inc. | Product Releases | Comments

Mahr Federal's broad line of mechanical comparative gages can now be configured for wireless data transmission with the addition of a MarCator 1086 or 1087 wireless digital indicator. The line includes a wide array of snap gages, ID & OD gages, fixed and...

LISTED UNDER: Gauges, Meters, Monitors

Industrial Cameras with 10MP CMOS Digital Image Sensor

December 10, 2014 2:52 am | by The Imaging Source, LLC | Product Releases | Comments

The Imaging Source, an international manufacturer of machine vision cameras, has just announced the immediately availability of new 10 MP industrial cameras with a USB 3.0 interface. The Imaging Source 10 MP industrial cameras, which ship with the Aptina MT9J003 sensor and a USB 3.0 interface, are the perfect solution for applications that require high resolution, high speed and outstanding...

LISTED UNDER: Camera

4-Axis Diameter & Ovality Gauge

December 9, 2014 2:21 pm | by NDC Technologies | Product Releases | Comments

NDC Technologies, a leading global provider of precision measurement and control solutions, announces the availability of the highly anticipated Beta LaserMike AccuScan 6012 four-axis diameter and ovality gauge. Built on the proven and widely deployed AccuScan series platform, the new AccuScan...

LISTED UNDER: Measurement Instruments | Optical Inspection | Sensors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading