Artificial Spinal Disc Incorporates New Technological Approach

October 15, 2004 5:30 am | Product Releases | Comments

The Project: To figure out the design and manufacture of microelectronics circuits used inside a complex new artificial spinal disc. The Solution: Create a miniaturized packaging solution that fits the electronics into a volume of less than two cubic centimeters.

LISTED UNDER: Flexible Circuits | Medical Device Testing | Medical Device Testing

Contract Packaging

October 14, 2004 10:54 am | Product Releases | Comments

Company offers fast turnaround on R&D, testing, and validation. They have on-site testing capabilities and procedures, FDA- and EPA-approved facilities, and intimate familiarity with regulatory and approval processes.

LISTED UNDER: Contract Packaging | Prototyping | Component Testing

Epoxy Adhesive (1177)

September 3, 2004 5:50 am | Master Bond, Inc. | Product Releases | Comments

This room temperature curing, two component epoxy adhesive, sealant, coating, and casting material is called EP42HT-2. This compound features high temperature resistance along with outstanding chemical resistance.

LISTED UNDER: Epoxy | Microbiology/Chemical Testing | Medical Device Testing

Ground Bond Testers (1055)

September 3, 2004 5:30 am | Product Releases | Comments

Designed for automated test or bench top use, the Guardian 1050 provides current to 45 Amps to meet the most stringent standards, and the economical Sentry 50 Plus provides current to 30 Amps for less demanding applications.

LISTED UNDER: Product-Safety/Performance Testing

Material Testing

September 3, 2004 5:30 am | Product Releases | Comments

Designed to test tensile, compression, flexural, and peel properties of a wide variety of materials, the 3300 Series is a cost-effective mechanical tester.

LISTED UNDER: Material Testing | Material Testing

RF Signal Strength Analyzer

September 3, 2004 5:30 am | Product Releases | Comments

This generation of hand-held, RF Signal Strength Analyzers features 2.9 GHz bandwidth, -117dB/m max sensitivity, and a scan rate of 125 channels/sec.

LISTED UNDER: Product-Safety/Performance Testing

Medical Device Testing

July 8, 2004 11:39 am | Product Releases | Comments

The 5500 Series testing systems are ideally suited to provide testing solutions for the research and development of medical devices.

LISTED UNDER: Medical Device Testing | Medical Device Testing | Product R&D

Ionic Contamination Test Equipment

June 8, 2004 9:52 am | Specialty Coating Systems | Product Releases | Comments

The Ionograph 500M SMD IIc test module is the latest in the company's line of powerful, low cost test devices for ionic contamination testing and process control in both electronic and medical manufacturing.

LISTED UNDER: Other Testing Instruments | Medical Device Testing

Portable Testers

April 1, 2004 11:39 am | Product Releases | Comments

Designed to be easily transported to various sites to perform spot testing, the In-Spec&#153 2200 portable testers are ideal for a variety of applications, including tension, compression, texture, and flexure testing.

LISTED UNDER: Product-Safety/Performance Testing

Contract Assembly

March 4, 2004 5:51 am | Product Releases | Comments

UFE is a comprehensive resource for manufacturers. The company provides support for product and subassembly manufacturing. It has experience in program management, component sourcing, production development, testing, and assembly.

LISTED UNDER: Custom Assembly | Component Testing

Spring Tester

February 6, 2004 8:46 am | Product Releases | Comments

This Spring Tester is designed to test tension and compression springs up to 1,000 lbs. The tester can accept a wide variety of spring sizes up to 17 in. in length and over 8 in. in diameter. It features a large side mounted hand wheel requiring minimal user effort and a rigid 3 in. x 3 in. column.

LISTED UNDER: Product-Safety/Performance Testing

Power Supplies

February 6, 2004 8:45 am | Product Releases | Comments

The MHX family of modular high-voltage power supplies is for use in systems powered by 24-volt DC supplies. Measuring only 10 x 3.9 x 5.

LISTED UNDER: Power Supplies | Material Testing

December 4, 2003 7:19 am | Product Releases | Comments

Dekko Medical Devices is a full-service contract manufacturer serving the medical device, diagnostic, and biotech industries.

LISTED UNDER: Full Service Contract Manufacturing | Injection Molding | Medical Device Testing

December 4, 2003 7:19 am | SMC, Ltd. | Product Releases | Comments

SMC Ltd. offers complete Contract Manufacturing, from design to manufacturing and support, for the medical industry. SMC's certified and registered multi-facility organization provides complete turnkey assembly.

LISTED UNDER: Full Service Contract Manufacturing | Cleanroom Assembly | Medical Device Testing


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.