Advertisement

Needle Sharpener Keeps Phoenix on Point

December 5, 2008 7:03 am | Product Releases | Comments

Phoenix Medical Products, a contract manufacturer of various devices used in a number of medical markets, has one department devoted entirely to needle design, production, sterilization, and packaging, as this work has a unique set of challenges.

LISTED UNDER: Grinding Machines | Medical Device Testing

Quality Check Secures the Seals of Medical Pouches

December 5, 2008 7:03 am | Product Releases | Comments

Medical device designer and manufacturer, Rocket Medical PLC, is using a Mecmesin computer-controlled test system to perform quality checks on the heat seals of medical pouches in accordance with British Standard BS EN 868-5:1999.

LISTED UNDER: Seal-Strength Testing | Medical Device Testing | Seal-Strength Testing

Handbook of Plastics Testing and Failure Analysis

November 10, 2008 6:52 am | Product Releases | Comments

Written in easy-to-read and -use format, this book updates and revises its bestselling predecessor to become the most complete, comprehensive resource on plastics testing. This book has an emphasis on significance of test methods and interpretation of results.

LISTED UNDER: Material Testing
Advertisement

Compliance Testing and Monitoring Tools Measure Prohibitive Metals

November 10, 2008 6:52 am | Product Releases | Comments

A line of XRF tools is introduced for compliance testing and monitoring of prohibitive metals for the EU directives RoHS/WEEE for the circuit board and packaging electronics and plating industries.

LISTED UNDER: Product-Safety/Performance Testing

Programmable Force Tester Features PC Control

October 13, 2008 12:07 pm | Product Releases | Comments

The Model ESM301 force tester is designed for product integrity testing in quality control, manufacturing, and R&D areas. With a load capacity of 300 lbf (1.

LISTED UNDER: Product-Safety/Performance Testing | Product R&D

Silicone Offers High Adhesion to Silicones and Plastics

July 21, 2008 5:19 am | Product Releases | Comments

This light and moisture curing silicone adhesive is designed for use on medical devices that incorporate silicone materials or require highly flexible bond joints or coatings. The adhesive eliminates part racking and allows immediate quality control testing.

LISTED UNDER: Silicone | Medical Device Testing | Silicone

UPS for Sophisticated Biomedical and Laboratory Applications

July 14, 2008 4:54 am | Product Releases | Comments

A new Biomedical and Laboratory-Grade UPS specifically designed for the unique power demands of biomedical and laboratory equipment has been introduced.

LISTED UNDER: Product-Safety/Performance Testing

Polycarbonate Resin Poised to Provide Weapon Against Hospital Infection

July 8, 2008 4:38 am | Product Releases | Comments

Two grades of antimicrobial polycarbonate resin have been developed for use in the production of medical devices.

LISTED UNDER: Resin | Medical Device Testing | Component Testing
Advertisement

Low-Force Cyclic Machine Performs Range of Tests

June 27, 2008 4:51 am | Admet, Inc. | Product Releases | Comments

This machine can perform cyclic tests of biomaterials and medical devices and mimic body systems, making it suitable for medical applications. The tabletop machine performs compression, tensile, and cyclic testing to 15 Hz.

LISTED UNDER: Material Testing | Medical Device Testing

Probe Test Socket for Devices up to 13 mm sq.

June 26, 2008 5:11 am | Product Releases | Comments

The sockets come available in four versions, including 1-3 GHz, 3-5 GHz, 5-9 GHz, and 10-18 GHz, the new socket is ideal for manual, high-speed testing of devices such as CSP, &#956BGA, DSP, LGA, SRAM, DRAM, and Flash, with pitches as low as 0.4 mm.

LISTED UNDER: Sockets | Component Testing

Serial ID Program Provides Exceptional Quality Control

June 19, 2008 6:54 am | Product Releases | Comments

This new serial identification program ensures quality control with lot traceability previously unattainable in the frequency control industry.

LISTED UNDER: Identification Products | Component Testing

Load Cell Calibration Unit Helps Certify Testing Machines

May 8, 2008 8:43 am | Admet, Inc. | Product Releases | Comments

This digital tool is provided for force calibration. Called the Gauge Buster Calibration Unit, it is designed to be combined with load cells to certify materials testing machines, presses, and other load weighing equipment to ASTM E4 Force Verification standards.

LISTED UNDER: Load Cells | Transducers | Material Testing

Single Column Testing System Is Easily Configured

May 8, 2008 8:43 am | Product Releases | Comments

Engineered as a solution for a variety of applications including needles, sutures, tubing, medical packaging, and gloves, the 3300 single column medical device testing system is easily configured with grips or fixtures for tension, compression, flex, and peel testing.

LISTED UNDER: Product-Safety/Performance Testing | Medical Device Testing | Medical Device Testing

Syringe Testing Rig Ensures Quality Control, Product Safety

May 8, 2008 8:43 am | Product Releases | Comments

Operated in conjunction with the TA.XT Plus texture analyzer, this innovative attachment effectively measures the aspiration force of filled syringe pistons.

LISTED UNDER: Product-Safety/Performance Testing

Leak and Seal Strength Package Test System

March 11, 2008 5:10 am | Product Releases | Comments

The feature-rich Lippke 4000 Series is designed to perform a variety of leak and seal strength tests on flexible, rigid, and porous materials. The Model 4000 is standalone and the Model 4500 is a PC-operated, bench-top unit.

LISTED UNDER: Product-Safety/Performance Testing

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading