Advertisement

Disinfection Process Validation

January 21, 2015 12:49 pm | Nelson Laboratories, Inc. | Products

Disinfectant tests are used to validate sanitizing agents for effectiveness against organisms, which is an increasing area of concern to manufacturers and regulatory agencies. Materials tested typically include household and industrial disinfectants, sporicides, fungicides and hand sanitizers. Disinfectant testing is conducted per many different standards including AOAC Chapter 6 tests, ASTM E 2315, USP General Chapter 1072 and ASTM E 26140. We are highly experienced in performing general disinfectant efficacy tests to establish kinetic kill curves for a large variety or organisms.

LISTED UNDER: Laboratory Services | Laboratory Testing | Material Testing

Biocompatibility Test Services

January 21, 2015 12:47 pm | Nelson Laboratories, Inc. | Products

Biocompatibility testing is very common in the medical device industry. However, with 24 possible categories, each with a unique set of testing requirements, the biocompatibility testing experience can be intimidating. Even after a device has been categorized, a myriad of decisions for each test remains. The biocompatibility team at Nelson Laboratories will work with you to develop a comprehensive testing plan that’s right for your product. We’ll also partner with you throughout the testing process, helping you to eliminate time- and resource-draining surprises.

LISTED UNDER: Biocompatibility Testing

Piezo Nanopositioning Stages

January 13, 2015 3:56 pm | by Aerotech, Inc. | Aerotech, Inc. | Product Releases | Comments

Aerotech QNP-XY series piezo nanopositioning stages provide the resolution, linearity, repeatability, and high dynamics required for the most demanding applications from microscopy to optics alignment. With resolution to 0.15 nm, linearity to 0.007%, and repeatability to 2 nm, nanometer-level precision is assured. With the highest dynamics (resonant frequency and stiffness) of any other...

LISTED UNDER: Positioning Stages and Tables | Microscopes
Advertisement

Wireless Data Transmission for Portable and Bench Gages

December 10, 2014 2:21 pm | by Mahr Federal, Inc. | Mahr Federal, Inc. | Product Releases | Comments

Mahr Federal's broad line of mechanical comparative gages can now be configured for wireless data transmission with the addition of a MarCator 1086 or 1087 wireless digital indicator. The line includes a wide array of snap gages, ID & OD gages, fixed and...

LISTED UNDER: Gauges, Meters, Monitors

Industrial Cameras with 10MP CMOS Digital Image Sensor

December 10, 2014 2:52 am | by The Imaging Source, LLC | Product Releases | Comments

The Imaging Source, an international manufacturer of machine vision cameras, has just announced the immediately availability of new 10 MP industrial cameras with a USB 3.0 interface. The Imaging Source 10 MP industrial cameras, which ship with the Aptina MT9J003 sensor and a USB 3.0 interface, are the perfect solution for applications that require high resolution, high speed and outstanding...

LISTED UNDER: Camera

4-Axis Diameter & Ovality Gauge

December 9, 2014 2:21 pm | by NDC Technologies | Product Releases | Comments

NDC Technologies, a leading global provider of precision measurement and control solutions, announces the availability of the highly anticipated Beta LaserMike AccuScan 6012 four-axis diameter and ovality gauge. Built on the proven and widely deployed AccuScan series platform, the new AccuScan...

LISTED UNDER: Measurement Instruments | Optical Inspection | Sensors

Video Measuring Microscope With Image Processing

December 4, 2014 11:08 am | by Mahr Federal, Inc. | Mahr Federal, Inc. | Product Releases | Comments

Mahr Federal will feature the MarVision MM 320, a new video measuring microscope with image processing capability, the flagship product for a new line of Mahr optical measuring instruments, at MD&M West, February 10-12, 2015, Anaheim Convention Center...

LISTED UNDER: Microscopes | Optical Inspection

Quality Management Solution

November 19, 2014 8:48 am | by TIP Technologies | Product Releases | Comments

TIPQA™ is a simple, flexible, yet complete solution for manufacturers who view quality as a competitive advantage. TIPQA™ is optimized for the Aerospace & Defense Industry, Medical Device Industry, and complex manufacturing markets. Use of the TIPQA™ solution has resulted in proven, documented success by countless companies that demand delivery of highly regulated, quality products. TIPQA™...

LISTED UNDER: Product-Safety/Performance Testing
Advertisement

One-Shot Measuring Microscope with Image Processing

November 18, 2014 9:28 am | by Mahr Federal, Inc. | Mahr Federal, Inc. | Product Releases | Comments

Mahr Federal has introduced a new video measuring microscope with image processing capability, the flagship product for a new line of Mahr optical measuring instruments. Designed for the measurement and/or dimensioning of geometric elements, the MarVision QM 300 incorporates an integrated...

LISTED UNDER: Microscopes | Optical Inspection

Metered Dose Inhaler Test Solution

November 5, 2014 3:00 pm | by Ametek Chatillon | Product Releases | Comments

Working with a leading pharmaceutical manufacturer, AMETEK Test & Calibration Instruments recently developed an innovative semi-automated solution for testing the firing mechanisms used in one-shot pressurized metered dose inhaler (MDI) canisters. Previously there was no known dedicated testing solution for testing MDIs to protect patient safety by ensuring that the correct dosage of a drug...

LISTED UNDER: Product-Safety/Performance Testing

Robust Thermocouple Logger

October 16, 2014 8:30 am | by MDT Staff | Saelig Company, Inc. | Product Releases | Comments

Saelig Company has introduced the Lascar EL-ENVIROPAD-TC - a conveniently-sized thermocouple-based temperature meter for spot temperature readings with additional built-in data-logging and graphing functionalities...

LISTED UNDER: Temperature Instruments

Fully Automated WVTR Testing System

September 30, 2014 8:30 am | by MDT Staff | Mocon, Inc. | Product Releases | Comments

MOCON, Inc. is unveiling the first-ever, fully-automated water vapor transmission rate (WVTR) testing system for packaging and other barrier structures, the PERMATRAN-W Model 3/34 G. (WVTR is the steady state rate at which water vapor permeates through

LISTED UNDER: Other Testing Instruments | Product-Safety/Performance Testing

Accelerated Heart Valve Durability Testing

September 17, 2014 8:30 am | by MDT Staff | Product Releases | Comments

Bose Corporation has introduced DuraPulse, a new instrument for accelerated durability testing of heart valve replacement devices. Featuring proprietary Bose controls and linear motor technology, the DuraPulse system enables research and development engineers to run tests at high frequencies...

LISTED UNDER: Product-Safety/Performance Testing

High Accuracy Portable CMM Arm

September 11, 2014 8:30 am | by MDT Staff | Hexagon Metrology, Inc. | Product Releases | Comments

Hexagon Metrology today announced the release of the ROMER Absolute Arm 1.2m portable coordinate measuring machine (CMM). The portable measuring arm uses industry-proven technology from the ROMER Absolute Arm to provide high-accuracy 3D measurement in...

LISTED UNDER: Coordinate measuring machine

Energy Reduction Test Time Saver

September 9, 2014 8:30 am | by MDT Staff | Compliance West USA | Product Releases | Comments

Compliance West is pleased to introduce the D5-PF, specifically designed to provide a numeric display of the joules consumed in the energy reduction test, saving test time and ensuring accuracy...

LISTED UNDER: Other Testing Instruments | Product-Safety/Performance Testing

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading