Advertisement

Software Solutions: Building Blocks for FDA Compliance

December 5, 2006 10:48 am | Syspro | Product Releases | Comments

Many medical device manufacturers have discovered that their choice of ERP

LISTED UNDER: Compliance Software | Injection Molding | Medical Device Testing

ScopeMeter/Divider Kit

December 4, 2006 4:39 am | Product Releases | Comments

The 199XRAY Medical ScopeMeter and 35080M Non-Invasive kVp Divider kit combination significantly streamlines x-ray system calibration, QA, or corrective maintenance procedure setup and analysis.

LISTED UNDER: Product-Safety/Performance Testing

Sterility Testing White Paper

November 7, 2006 12:04 pm | Product Releases | Comments

Microtest offers a free white paper, titled: “Sterility Testing: Essential Things You Must Know.” Sterility testing of medical devices is required during the sterilization validation process as well as for routine quality control.

LISTED UNDER: Medical Device Testing
Advertisement

Code Reader

November 6, 2006 11:12 am | Panasonic Electric Works Corp Of America | Product Releases | Comments

The compact 2D code reader, PD60/65, can read 2D codes from a full 360&#176 direction on metal even if it is stained, chipped, tilted, or reversed in approximately 30 ms.

LISTED UNDER: Optical Inspection

Local-Based CE Certification of Medical Devices Is Available

November 6, 2006 10:37 am | Product Releases | Comments

North American medical device manufacturers have a faster way of obtaining CE certification for exports to Europe.

LISTED UNDER: Medical Device Testing

UV Portable Magnifier

November 6, 2006 5:59 am | Luxo | Product Releases | Comments

This UV portable magnifier is an illuminated handheld magnifier specially designed for the inspection of conformal coatings. It features a 13 W UV-A black bulb which causes such coating to glow brilliantly. A 5-diopter optical-quality, white crown, glass lens provides 2.

LISTED UNDER: Optical Inspection

Facing Double Jeopardy in the Testing of Combination Products

October 13, 2006 9:50 am | Microtest Laboratories, Inc. | Product Releases | Comments

Combination products can cause twice as many problems for companies in the testing of these devices since they require expertise in two highly regulated specialties—medical devices and pharmaceuticals. This article offers a number of areas manufacturers of these devices will have to consider.

LISTED UNDER: Medical Device Testing | Cylinders | Biocompatibility Testing

Silicone Is the Stone That Kills Two Birds

October 13, 2006 9:50 am | Product Releases | Comments

Silicone has emerged as one of the most researched biomaterials available to pharmaceutical makers and medical device manufacturers. As such, it readily lends itself to being an ideal choice for use in combination products where these two industries merge.

LISTED UNDER: Silicone | Injection Molding | Micro Molding
Advertisement

Designing Devices for Patients on the Run

October 13, 2006 8:15 am | Altera Corporation | Product Releases | Comments

Medical monitoring devices are moving out of the hospital and into the hands of consumers, driving a shift to a platform approach for designing medical electronics.

LISTED UNDER: Design Services | Medical Device Testing | Component Testing

The Combination Products Event for 2007

October 11, 2006 8:48 am | Product Releases | Comments

Reed Life Sciences is excited to announce PharmaMedDevice—the only comprehensive forum that fully illuminates the convergence of the medical device, pharmaceutical, and biologic industries. The inaugural event will be co-located with Interphex, April 24-26, 2007, at the Jacob K.

LISTED UNDER: Business Planning | Microbiology/Chemical Testing | Medical Device Testing

Innovation Plus Collaboration Equals a Successful Combination

October 11, 2006 7:37 am | Product Releases | Comments

Companies need to move rapidly to take advantage of developing trends in healthcare treatment modalities. This article examines many of the factors combination product manufacturers need to consider to accelerate their product’s time to market.

LISTED UNDER: Product Design | Microbiology/Chemical Testing | Wire and Cable

Fabricating Components . . . Rapidly

October 10, 2006 6:15 am | Inland Technologies, Inc. | Product Releases | Comments

Medical device manufacturers require device components to be produced quickly to ensure their products are available to the marketplace as soon as possible. However, quality cannot be sacrificed in this effort. Rapid prototype tooling is a unique option that satisfies both of these two criteria.

LISTED UNDER: Rapid Prototyping | Prototyping | Rapid Prototyping

Camera System

September 7, 2006 10:16 am | Product Releases | Comments

Providing real-time control-room monitoring of technical processing operations at a range of up to 1,000 meters, the Lumiglas Visulex Ex camera system saves on-site staff and travel time while enhancing quality control/assurance programs in hazardous locations.

LISTED UNDER: Camera | Camera

Coordinate Measuring Machine (3341)

September 6, 2006 7:11 am | Carl Zeiss | Product Releases | Comments

The Contura G2 coordinate measuring machine provides a particularly affordable means of entering the world of scanning technology for production and progress inspection of single processing stages.

LISTED UNDER: Measurement Instruments

Machine Vision Illuminator (3337)

September 6, 2006 7:10 am | Dolan-Jenner Industries | Product Releases | Comments

The Fiber-Lite DC950 machine vision fiber optic illuminator for machine vision integrators is a 150-watt quartz halogen regulated illuminator.

LISTED UNDER: Machine-Vision Systems

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading