Advertisement

FlexiForce A301 Sensor

December 3, 2013 11:17 am | Tekscan, Inc. | Products

The FlexiForce A301 sensor is 1” in length and has a sensing area of .375”. Smaller than the traditional FlexiForce A201 sensor, the A301 is popular among design engineers who are prototyping for OEM applications, which often requires a smaller sensor. These A301 sensors are available in 4-packs/8-packs and in high quantities.

LISTED UNDER: Product Design | Prototyping | Thin-film

FlexiForce A201 Sensor

December 3, 2013 10:28 am | Tekscan, Inc. | Products

FlexiForce standard force sensor: 191 mm (7.5 in.) in length and a sensing area of 9.53 mm (0.375 in.) diameter. This thin, flexible force sensor is easy to integrate into products and applications. The sensors are trimmable and available in various force ranges: 0 - 1 lb. (4.4 N) 0 - 25 lb. (111 N) 0 - 100 lb. (445 N)

LISTED UNDER: Product Design | Prototyping | Measurement Instruments

High Performance 6 1/2 Digit DMM

December 2, 2013 4:53 pm | by MDT Staff | Saelig Co. Inc. | Product Releases | Comments

Saelig Company has introduced the GDM-8261A - a high precision 6 ½ digit Digital Multimeter with dual measurement displays, 11 measurement functions, and 10 highly accurate math functions (35ppm DC voltage accuracy) to accommodate the most frequently performed parameter measurements in many application fields.

LISTED UNDER: Measurement Instruments
Advertisement

Flow Sensors

November 26, 2013 11:47 am | Innovative Sensor Technology IST USA | Products

IST thin film mass flow sensors offer solutions for a wide variety of flow applications. The thin film and membrane technologies incorporate highly accurate temperature sensors and heaters as core elements of the sensors. IST flow sensors are applicable in both gas and partially in liquid, have an operating temperature range of -30°C to +450°C, and can measure flow rate and direction from 0.0001m/s (microflowSens) to 100m/s (respectively from 1mL/min to 10L/min). In addition to measuring flow rates, our liquid sensors can detect the presence of a liquid, biofilm, or bubbles, as well as indicate liquid level .

LISTED UNDER: Flow | RTDs | Thin-film

IVD Antimicrobial Testing Services

November 14, 2013 3:15 pm | ATS Labs | Products

ATS Labs helps the developers and manufacturers of antimicrobial impregnated products, such as IVD and others to support their product label claims. ATS Labs proactively assists medical device companies in the development of testing protocols, followed by generation of the necessary efficacy data to support the antimicrobial claims and the FDA regulatory clearance.

LISTED UNDER: Material Testing | Medical Device Testing | Microbiology/Chemical Testing

Cleaning Validation for Point-of-Care Device

November 14, 2013 2:14 pm | ATS Labs | Products

ATS Labs has unmatched experience in assisting clients with the development of custom cleaning and disinfection test protocols for POC devices that have been reviewed by the FDA. ATS Labs is a leader in virucidal efficacy validation of disinfection procedures for BGMS, lancing devices and other POC devices. We welcome the opportunity to work with clients to design a custom, practical validation studies that simulate your process and assures your process is sufficiently robust to protect the users of your products. Contact us to discuss your point of care cleaning and disinfection validation testing needs.

LISTED UNDER: Functional Testing | Material Testing | Medical Device Testing

Reusable Medical Device Cleaning Validation

November 14, 2013 2:09 pm | ATS Labs | Products

ATS Labs performs reusable medical device cleaning validations using quantitative methods that recover clinically relevant soil markers such as hemoglobin, carbohydrates, and protein. The methods used by ATS Labs follow current recommendations in AAMI TIR 30, AAMI TIR 12, and the FDA draft guidance for Processing/Reprocessing Medical Devices in Health Care Settings.

LISTED UNDER: Functional Testing | Medical Device Testing | Microbiology/Chemical Testing

Economical 150MHz AWG Signal Generator

November 11, 2013 2:43 pm | by MDT Staff | Saelig Co. Inc. | Product Releases | Comments

Saelig Company has introduced the AG4151 - an economical, feature-rich, dual-channel multi-function generator which combines arbitrary waveform and function generation using Direct Digital Synthesizer (DDS) technology to provide stable, precise, low distortion signals at up to 150MHz.

LISTED UNDER: Oscilloscope | Other Testing Instruments
Advertisement

Long Range Indicator Calibrator

November 11, 2013 1:46 pm | by MDT Staff | Mahr Federal, Inc. | Product Releases | Comments

Mahr Federal has introduced a new long range indicator calibrator, the OPTIMAR 25. A precision benchtop instrument, the OPTIMAR 25 can be used for the calibration of a wide variety of precision measuring instruments. Accurate to ±10 µin. (±0.3 µm) over its full 0 - 1 in. (25 mm) range...

LISTED UNDER: Measurement Instruments | Other Testing Instruments

Vision Turbine Flow Meters Measure Low-viscosity and Non-aggressive Liquids

November 7, 2013 3:53 pm | by MDT Staff | Product Releases | Comments

Badger Meter announced the introduction of the Vision Series turbine flow meters, which comply with lead-free provisions of the United States Safe Drinking Water Act (SDWA) and are bisphenol A (BPA) free. The compact meters are designed for flow measurement of low-viscosity and non-aggressive liquids...

LISTED UNDER: Flow Meters

Highly Efficient Aquionics UV-LED Transmittance Monitor

October 30, 2013 1:15 pm | by MDT Staff | Product Releases | Comments

The new Aquionics PearlSense T254 is the world’s first transmittance monitor to use UV-LED technology. The monitor provides UV disinfection system manufacturers and operators with highly accurate UV transmittance (UVT) readings in all conditions over an extended lifetime, ensuring proper UV dosing and efficient operation.

LISTED UNDER: Gauges, Meters, Monitors

Functional Test and Boundary Scan Development at MD&M Minneapolis

October 28, 2013 10:01 am | by MDT Staff | Product Releases | Comments

ACD will exhibit in Booth #2040 at the upcoming Medical Design & Manufacturing (MD&M) Minneapolis Exposition, scheduled to take place October 29-30, 2013 at the Minneapolis Convention Center.

LISTED UNDER: Other Testing Services

High-Accuracy Platinum Probe Thermometer

October 16, 2013 3:56 pm | by MDT Staff | Product Releases | Comments

Control Company’s Traceable Platinum High-Accuracy Thermometer is the first Traceable –80°C thermometer with 24 hour/7-day/31-day MIN/MAX memory. Time/date stamp key shows exact time and date for all minimum and maximum readings.

LISTED UNDER: Temperature Instruments

Mobile iPad Application

October 8, 2013 5:01 pm | by MDT Staff | Product Releases | Comments

Fluke Biomedical announced the launch of its first-ever mobile iPad application. Designed with field service professionals in mind, the app is simple to use and offers detailed product information for all biomedical, diagnostic imaging, radiation, and nuclear power products.

LISTED UNDER: Other Testing Services | Product-Safety/Performance Testing

Panel Builder Pressure Gauge

September 27, 2013 3:05 pm | by MDT Staff | Ashcroft Inc. | Product Releases | Comments

The new Ashcroft Type 2008S panel builder’s gauge incorporates exclusive, field-proven performance features into a rugged, all welded front-flanged pressure gauge. The gauge dial measures 63mm in diameter and combines stainless steel wetted parts and case along with the patented PowerFlex spring suspended movement to ensure superior reliability and longevity.

LISTED UNDER: Gauges, Meters, Monitors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading