Advertisement

Conformal Coating Jet

February 28, 2007 10:46 am | Asymtek | Product Releases | Comments

The SC-400 PreciseCoat conformal coating jet is designed for applying coating materials to highly selective areas, especially on small substrates or substrates with high-component density where there are tight tolerances between coated and uncoated areas.

LISTED UNDER: Dispense | Device Coating
Advertisement

Dispensing Valve

July 10, 2006 10:13 am | I & J Fisnar, Inc. | Product Releases | Comments

The VMP30H is a multipurpose, mini-poppet pneumatic valve designed for controlled dispensing of low to high viscosity materials, such as silicones, RTV, epoxy, rubber adhesives, greases, and filled materials.

LISTED UNDER: Dispense | Control | Silicone

Mix-Dispense Valve

May 2, 2006 8:29 am | Sealant Equipment & Engineering, Inc. | Product Releases | Comments

The Model 2200-545-037 two-component miniature mix-dispense valve precisely dispenses miniature beads and very small volumes of low-viscosity pourable materials and abrasive or filled materials.

LISTED UNDER: Dispense | Miniature Valve | Flow

Dispense Valve (2807)

February 9, 2006 8:45 am | Sealant Equipment & Engineering, Inc. | Product Releases | Comments

The model 2200-245-125 Tip-Seal dispense valve is designed for precision dispensing of low- to high-viscosity flowable materials. It is also used in high-speed stitching or repetitive on-off applications where short segments of material are deposited onto a surface.

LISTED UNDER: Dispense | Flow | Silicone

Dispense Valve (1881)

April 1, 2005 6:01 am | Sealant Equipment & Engineering, Inc. | Product Releases | Comments

The 2600-003 Series positive-displacement metering valve is designed to dispense precisely repeatable, small-volume shots of low- to high-viscosity adhesive and sealant materials and lubricants.

LISTED UNDER: Dispense

Servo-Ribbon Applicator

July 8, 2004 11:39 am | Sealant Equipment & Engineering, Inc. | Product Releases | Comments

The Servo-Ribbon Applicator (SRA) is a new concept in dispense-valve applicator tools. It combines an AC Servo-Motor and fluid-dispense valve to robotically position the valve's tip at the correct angle to deliver a precise ribbon-shaped material pattern.

LISTED UNDER: Dispense | Flow

Dispense Valve (503)

March 4, 2004 5:50 am | Graco Ohio Inc | Product Releases | Comments

The Dispensit&reg Model 1053-6 rod positive displacement dispense valve is designed for accurate, repeatable dispensing of shots and beads ranging from 0.002 ccs to 1.8 ccs in compliance with USP Class VI requirements.

LISTED UNDER: Dispense | Control | Flow

Dispensing Valves

March 4, 2004 5:50 am | Hernon Manufacturing Inc. | Product Releases | Comments

This comprehensive line of valves is specifically designed for the automated application of materials including adhesives, sealants, greases, inks, and man other liquid products.

LISTED UNDER: Dispense

Metering/Dispense Valve

December 3, 2003 10:54 am | Graco Ohio Inc | Product Releases | Comments

The PosiDot&reg valve is able to meter, mix, and dispense small shots from 0.005 cc to 5.0 cc while maintaining precise ratio and shot size repeatability.

LISTED UNDER: Dispense

Dispense Valve

April 10, 2003 11:34 am | Graco Ohio Inc | Product Releases | Comments

The Dispensit&reg Model 1052 rod positive displacement valve series is designed for accurate, repeatable dispensing of shots ranging from 0.002 cc to 1.8 cc. The Model 1052 can dispense virtually any single component material needed medical application.

LISTED UNDER: Dispense

Dispense Valves

January 10, 2003 9:02 am | Sealant Equipment & Engineering, Inc. | Product Releases | Comments

More than 800 drip-free Snuf-Bak&#153 dispense valve models are available for both single- and plural-component materials. They are ideal for automated or robotic applications as well as manual dispensing of silicone, mastic, polyurethane, lubricants, epoxy, and other pumpable materials.

LISTED UNDER: Dispense | Control | Flow

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading