Dispense
Precision Spray Control System
April 3, 2013 10:33 am | by MDT Staff | Fisnar Inc. | Product Releases | CommentsFisnar Inc. brings together an enhanced SV2000N series of close tolerance, minimum overspray valves with a precision SVC100 controller that manages the functions necessary to provide repeatable and precise spray performance.
LISTED UNDER: Dispensers/Fillers | Dispense | Silicone
Dispensing Valve Operates with Extreme Precision
March 26, 2013 10:12 am | by MDT Staff | Dymax Corporation | Product Releases | CommentsThe Model 455 dispensing valve from Dymax Corporation is a pneumatically operated, normally closed pinch valve with a disposable fluid path. It was designed to dispense a variety of low- to medium-viscosity materials with extreme precision.
LISTED UNDER: Dispense | Pinch ValveCompact Valve
September 25, 2012 11:24 am | Norgren Inc. | Product Releases | CommentsCompact size, low power consumption and an unrivalled operating pressure range are key benefits of the new Chipsol media separated (MS) valve from Norgren, an international market leader in pneumatic motion and fluid control technologies. The Chipsol MS 2/2 valve, from Norgren subsidiary FAS, was developed in response...
LISTED UNDER: Dispense | Isolation | Control
Versatile Dispensing Systems Offer Accuracy and Consistency
July 17, 2012 9:07 am | Dymax Corporation | Product Releases | CommentsDymax Corporation’s new Model 475 valve dispensing systems utilize a pneumatic, normally closed diaphragm valve to accurately dispense low- to high-viscosity fluids. The design of the internal diaphragm and adjacent parts prevents migration of fluid into the actuating section within the valve.
LISTED UNDER: Dispense | Air Filter
No-Drip Mix-Dispense Valves for 2-Component Adhesives, Sealants
December 19, 2011 6:37 am | Product Releases | CommentsSealant Equipment & Engineering, Inc.’s new 2600-093 Micro-Kiss™ Series Mix-Dispense Valves are designed for low-flow mixing and dispensing of 2-component adhesives...
LISTED UNDER: Seals and Gaskets | Dispense | Control
Valve Actuator Improves Dispense Valve Speed and Accuracy
July 6, 2010 7:29 am | Efd Inc. | Product Releases | CommentsNordson EFD’s Backpack Valve Actuator can help companies produce more products in less time by cycling select EFD dispense valves two to three times faster than previously possible.
LISTED UNDER: Actuators | Dispense | Cylinders
Vertical Hand-Held Fluid Valves Improve Dispensing Ergonomics
March 17, 2009 11:15 am | Sealant Equipment & Engineering, Inc. | Product Releases | CommentsThe 1270-857 series pneumatic, vertical handle-mounted Kiss dispense valves are ideal for dispensing low- to high-viscosity 1-component adhesives, sealants, and lubricant materials.
LISTED UNDER: Dispense | FlowDesign Talk: Valves
December 5, 2008 7:03 am | by Ralph Buck | The Lee Company | Articles | CommentsVHS Injection Manifold Mounting System By Ralph Buck Ink jet valves have been used in micro dispensing for many years. Their high speed and consistent performance allow for the precise dispensing of fluids.
LISTED UNDER: Dispense | Control | FlowDispensing the Facts on Valves
December 5, 2008 7:03 am | by Steven Young | Articles | CommentsDispense valves can be a vital tool in the assembly and manufacture of medical devices. However, choosing the correct type to use for a particular application may not always be abundantly clear.
LISTED UNDER: Dispense | Control | Flow
Micro-Dispense Nozzles
November 11, 2008 5:34 am | The Lee Company | Product Releases | CommentsMicro-dispense nozzles provide a convenient method of accurately controlling dispensed volumes when used in conjunction with the company’s VHS (Very High Speed) Micro-Dispense Valves.
LISTED UNDER: Dispense | Control
Dispense Valve Provides Clean Shut-Off
March 11, 2008 7:18 am | Sealant Equipment & Engineering, Inc. | Product Releases | CommentsThe 2600-041 Series Snuf-Bak dispense valve is designed for fast and clean shut-off of thixotropic and cohesive materials such as viscous silicones, epoxies, and urethanes. The design incorporates the company’s trademark Snuf-Bak action of fluid materials in a small, compact KISS Series valve body.
LISTED UNDER: Dispense | Silicone
Dispense Valve (4137)
May 18, 2007 11:24 am | Sealant Equipment & Engineering, Inc. | Product Releases | CommentsThe Model 2200-033-011 automatic Snuf-Bak dispense valve is ideal for high volume fluid control and fast shut-off of viscous materials such as polyurethanes, epoxies, silicones, greases, and various cohesive (stringy) and thixotropic adhesives and sealants.
LISTED UNDER: Dispense | Control | Flow
Filling Valve
May 18, 2007 11:24 am | Tridak | Product Releases | CommentsThe Model 775 filling valve is a pneumatically operated spool type valve that can accurately dispense medium to high viscosity fluids. It is capable of dispensing shots of less than 0.01 to over 50 ml and features an adjustable pull-back for crisp shut-off.
LISTED UNDER: Dispense | Control
Conformal Coating Jet
February 28, 2007 10:46 am | Asymtek | Product Releases | CommentsThe SC-400 PreciseCoat conformal coating jet is designed for applying coating materials to highly selective areas, especially on small substrates or substrates with high-component density where there are tight tolerances between coated and uncoated areas.
LISTED UNDER: Dispense | Device Coating
Dispensing Valve
July 10, 2006 10:13 am | I & J Fisnar, Inc. | Product Releases | CommentsThe VMP30H is a multipurpose, mini-poppet pneumatic valve designed for controlled dispensing of low to high viscosity materials, such as silicones, RTV, epoxy, rubber adhesives, greases, and filled materials.
LISTED UNDER: Dispense | Control | Silicone
