Advertisement

Pumphead

July 8, 2004 11:39 am | Watson Marlow Pumps Group | Product Releases | Comments

The contamination-proof design and customization capabilities make the 313D ideal for medical applications. The pumphead features secure clamps to allow more clearance during loading and prevents tampering.

LISTED UNDER: Peristaltic | Flow

Peristaltic Pump (765)

June 8, 2004 9:52 am | Watson Marlow Pumps Group | Product Releases | Comments

Designed specifically for sample preparation, the 400 FD/A pumps are ideal for automated laboratory applications, including dispensing and collecting samples and reagents.

LISTED UNDER: Peristaltic | Flow

High Purity Systems

April 29, 2004 6:27 am | Product Releases | Comments

Company features custom fabrication on tanks, manifold assemblies, cabinet assemblies, and accessories for high purity systems.

LISTED UNDER: Other | Flow | Fittings
Advertisement

IV Components

April 29, 2004 6:27 am | Product Releases | Comments

Booth #### B. Braun OEM/Industrial, an FDA registered, ISO 13485 manufacturer of disposable medical devices, offers a broad line of IV components to compliment its customers IV sets.

LISTED UNDER: Luers | Flow | Fittings

Disc Valve

April 1, 2004 11:39 am | Product Releases | Comments

This one-way disc valve with patent-pending design provides high flow rates across a wide range of pressures. It is designed for use in a wide range of applications such as IV and infusion. All materials are gamma compatible, USP class VI, DEHP-free, and latex free.

LISTED UNDER: Check | Flow | Silicone

Dispense Valve (503)

March 4, 2004 5:50 am | Product Releases | Comments

The Dispensit&reg Model 1053-6 rod positive displacement dispense valve is designed for accurate, repeatable dispensing of shots and beads ranging from 0.002 ccs to 1.8 ccs in compliance with USP Class VI requirements.

LISTED UNDER: Dispense | Control | Flow

Stopcock Valve

March 4, 2004 5:50 am | Product Releases | Comments

This Stopcock Valve is manufactured for use in low and medium pressure lines using fluid or gas. They are suitable for vacuum and pressure applications up to 50 PSI. The valve features a flow-through design that limits restriction through the valve stem.

LISTED UNDER: Stopcocks | Flow | Gas Valve

Flow/Pressure Calibrator (415)

February 6, 2004 8:57 am | Product Releases | Comments

The Qualichek 300 is an easy-to-use and versatile calibration instrument that can be used to set up and qualify gauge, differential pressure and flow testers, and to verify the specification of fixed leak masters.

LISTED UNDER: Other Testing Instruments | Flow
Advertisement

Solenoid Valve

December 4, 2003 7:07 am | Product Releases | Comments

The proportional solenoid valve is a single-stage direct-acting proportional solenoid valve. The valve provides a flow rate which is linearly proportional to the input current. The maximum air flow capacity is 120 SLPM with an inlet pressure of 25 psig and approximately 5 watts power requirement.

LISTED UNDER: Solenoid Valve | Proportional | Flow

Check Valves

November 5, 2003 6:10 am | Product Releases | Comments

This full line of check valves includes needle-free, in-line, normally closed, low pressure one-way, TRAC&#153, aspiration, and dual check valves. Available in a variety of flow rates, materials, sizes, and custom designs, the valves are designed to meet the toughest application challenges.

LISTED UNDER: Check | Flow

Isolation Valve

September 22, 2003 6:33 am | ASCO | Product Releases | Comments

Mini-Manifold Isolation Valve simplifies fluid control for manufacturers of clinical diagnostic instruments and analytical equipment. The Series 385 is a 16mm wide, manifold mount, miniature isolation valve designed to control the flow of aggressive chemicals or high purity fluids.

LISTED UNDER: Check Valves | Miniature Valve | Control

Capless Valve

April 10, 2003 11:34 am | Product Releases | Comments

The ULTRASITE positive displacement IV system features a needle-free design ideal for the intermittent injection, aspiration, or infusion of fluids. The ULTRASITE valve is a normally closed valve with female and male Luer lock connections.

LISTED UNDER: Check Valves | Flow

Syringe Pumps

April 10, 2003 11:34 am | Product Releases | Comments

A line of standard and custom syringe pumps are available for precision filling and dispensing applications. The VersaPump series offers syringe volumes ranging from 10 uL to 50 ML, with 3-way to 8-way valve capability. Pumps can be daisey-chained for continuous flow applications.

LISTED UNDER: Syringe | Flow

Pumps

March 17, 2003 6:52 am | Product Releases | Comments

The VersaPump series offers syringe volumes ranging from 10uL to 50ML, with 3-way to 8-way valve capability. Pumps can be daisey-chained for continuous flow applications. These pumps offer chemically inert fluid paths of Teflon, Kel-F and borosilicate glass.

LISTED UNDER: Other | Control | Flow

Dispense Valves

January 10, 2003 9:02 am | Product Releases | Comments

More than 800 drip-free Snuf-Bak&#153 dispense valve models are available for both single- and plural-component materials. They are ideal for automated or robotic applications as well as manual dispensing of silicone, mastic, polyurethane, lubricants, epoxy, and other pumpable materials.

LISTED UNDER: Dispense | Control | Flow

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading