Advertisement

Dispense Valve (2807)

February 9, 2006 8:45 am | Product Releases | Comments

The model 2200-245-125 Tip-Seal dispense valve is designed for precision dispensing of low- to high-viscosity flowable materials. It is also used in high-speed stitching or repetitive on-off applications where short segments of material are deposited onto a surface.

LISTED UNDER: Dispense | Flow | Silicone

Gas Plasma System

February 8, 2006 5:57 am | Product Releases | Comments

The A400 gas plasma system has a 16 x 16 x 19 in. aluminum chamber, is clean room compatible, and available in both table-top and tall free-standing cabinet versions. Gas introduction via mass flow controllers and magnetic valves ensures precise gas measurement.

LISTED UNDER: Surface Modification | Control | Flow

Inert Diaphragm Valves

February 6, 2006 10:29 am | Product Releases | Comments

The inert diaphragm valve is a solenoid-operated diaphragm isolation valve designed for use with corrosive or high-purity fluids commonly found in the medical equipment industry. The materials of all surfaces in the flow path are inert and impervious to a wide range of aggressive fluids.

LISTED UNDER: Diaphragm Pump | Flow
Advertisement

Leak-Free Connections Speed Endoscope Reprocessing and Enhance Safety

January 9, 2006 11:47 am | Product Releases | Comments

The Project: To ensure the safe transfer of chemical disinfectants within an endoscope reprocessing unit. The Solution: Use custom fabricated couplings that provide a leak-free fluid pathway.

LISTED UNDER: Couplings | Control | Flow

Solenoid Valve (2477)

November 2, 2005 7:09 am | Product Releases | Comments

The HKL5 valve is designed to offer zero leakage in liquid and gas applications. This direct acting solenoid valve is 12.6 mm wide, with a high 0.05 C v flow rate, low 1.8 watt power consumption, a pressure rating from vacuum to 30 psig, and a working temperature range from 32&#176F to 175&#176F.

LISTED UNDER: Solenoid Valve | Flow | Gas Valve

Piston Pump

November 2, 2005 7:09 am | Product Releases | Comments

The Series PF valveless piston pump is specifically designed to ensure accuracy and reproducibility. The valveless design virtually eliminates clogging and allows for highly consistent metering and dosing of even soft-solid containing fluids.

LISTED UNDER: Piston | Flow

Emphasis on Innovation: Precision Particle ReductionEnables New Drug Delivery Methods

November 2, 2005 6:50 am | Product Releases | Comments

With the ability to reduce drugs to sub-micron particles of uniform size, exciting drug therapies and delivery methods are emerging. In fact, precision particle reduction processes are becoming as essential to 21st century medicine as the mortar and pestle were for the 19th century pharmacy.

LISTED UNDER: Product Design | Control | Flow

Miniature Solenoid Valves

September 30, 2005 11:43 am | The Lee Company | Product Releases | Comments

Series 120 solenoid valves are ultra-miniature, magnetically latched solenoid valves featuring high-performance flow-switching characteristics.

LISTED UNDER: Solenoid Valve | Miniature Valve | Flow
Advertisement

MDT Exclusive: Control Valve

August 31, 2005 8:56 am | Product Releases | Comments

The MEMS (micro-electro-mechanical-systems) valve uses electrostatic force to direct the flow of inert gases. It offers clean service by eliminating solenoids, spools, springs, and internal seals.

LISTED UNDER: Control | Control | Flow

Self-Priming Pump

August 9, 2005 7:19 am | Product Releases | Comments

The MilliGAT pump offers users bidirectional flow, a flow range from nL/min to mL/min, metering of volumes down to nanoliters, and smooth flow. It is self-priming and has no check valves. The pump eliminates the need for refill cycles and syringes.

LISTED UNDER: Other | Flow

Plastic Material Innovations Help Shape Healthcare Industry

June 30, 2005 6:40 am | Product Releases | Comments

An example of the successful application of wear-resistant compounds is this glucose meter. It contains internally lubricated, color-matched polycarbonate to reduce wear and motion-induced noise.

LISTED UNDER: Thermoplastic Elastomers | Injection Molding | Flow

Ball Valve

May 3, 2005 8:23 am | Product Releases | Comments

The model SB7F forged, high purity ball valve features self-aligning interlocking ends and an exclusive “fine adjust” handle to ensure exact alignment of the entire flow path. The A-182 forged material has a controlled delta ferrite content of less than one percent and as low as &lt0.5%.

LISTED UNDER: Ball | Actuators | Control

What’s Happening With Pumps and Valves

May 3, 2005 7:55 am | Product Releases | Comments

Figure 1. New peristaltic pump roller designs with a convex roller and concave tubing bed allow pumping media containing live cells with much less damage to the cells. The tube is squeezed in the middle first while the edges remain open, so the cells escape shearing or crushing.

LISTED UNDER: Other | Compressor | Diaphragm Pump

Acrylic Polymers Reference Guide

March 14, 2005 5:24 am | Product Releases | Comments

Medical device manufacturers and design engineers can enhance product quality with comprehensive product information on CYRO Industries’ medical grade compounds and alloys.

LISTED UNDER: Control | Flow | Fittings

Catalog of Chromatography and Fluid Transfer Products

February 4, 2005 10:35 am | Product Releases | Comments

The Upchurch Scientific/Rheodyne 2005 Catalog of Chromatography and Fluid Transfer Components is available. For the first time, the annual catalog includes valves, pumps, and accessories from sister IDEX Corporation Precision Flow Products business units Rheodyne, Ismatec, and Micropump.

LISTED UNDER: Flow

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading